• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.220-220
• /
• 2023

단순한 하상 변동 모형은 단일한 입경으로 구성된 하상재료를 다루는 데에 비해, 실제 하천에서는 다양한 입경의 유사가 섞여있다. 이러한 혼합 입경의 유사 이송을 모의하고자 하면 퇴적층의 생성과 소멸을 어떻게 모의하는지에 대한 기법이 중요해진다. 과거 연구에서는 유수의 영향을 받는 하상 두께가 입도 분포에 따라 다르다고 생각하였다. 반면, 다른 연구들에서는 두께가 합리적인 범위 내에 있다면 모의 결과에 영향을 미치지 않는다고 보고 상수로 설정하였다. 퇴적층의 개수를 어떻게 고려하느냐에 따라서도 모의기법이 나누어진다. 단일한 입경을 모의하는 경우 단일 퇴적층을 고려하지만, 혼합 입경을 고려하는 모형은 크게 2개의 퇴적층(active layer와 non-active layer)으로 나누는 종류와 3개 이상의 퇴적층을 고려하는 모형으로도 나눌 수 있다. 이 연구에서는 혼합 입경의 유사 이송을 모의할 수 있는 전 지형 발달 모형을 활용하여 퇴적층 처리 기법의 차이가 얼마나 모의 결과에 영향을 주는지를 파악하였다. 모의 결과는 기법이 바뀜에 따라 매우 민감하게 변하는 것을 확인할 수 있었다. 또한 이 연구에서는 3개 이상의 퇴적층을 고려함에 있어서 기존 퇴적층에 새로운 물질이 퇴적되었을 때 경계면에서 입자가 섞이는 mixed layer를 고려하는 개념을 제시한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.89-89
• /
• 2020

본 연구에서는 GPU 가속화 기반의 Boussinesq 모형인 Celeris Advecnt에 수심 적분된 2차원 이송-확산방정식을 추가하여 인터렉티브 시스템 기반의 추적자 이동 모형을 개발하였다. Celeris Advent는 최초로 개발된 인터렉티브 시스템을 갖춘 Boussinesq 모형으로, 시뮬레이션 중에 사용자가 모형의 파라미터뿐 아니라 모델 도메인 내 수위 및 수심을 바꿀 수 있다. 이를 통해 사용자는 모의가 진행되는 도중에 모델의 안정성 및 효율성을 위해 시간 간격을 조정할 수 있을 뿐 아니라 방파제 설치 등과 같은 지형 변화를 고려하기 위해 도메인 내 격자별 수심을 조정할 수 있다. 본 연구에서는 연안에서의 추적자 이동 모의를 위해 Boussinesq 방정식과 더불어 이송-확산방정식을 풀이하는 추적자 이동 모형을 개발하였다. 추적자의 확산항의 경우 분자 자체의 확산과 더불어 쇄파에 따른 난류 확산을 고려하였다. 난류 확산계수는 슈미트 수를 1로 두어 와동점성계수와 동일하게 두었으며, 와동점성은 단순화된 형태의 쇄파모형을 고려하여 계산하였다. 쇄파모형의 고려로 인해 이송-확산방정식과 더불어 운동량 방정식에서도 쇄파에 따른 운동량 소산이 고려되었다. 마지막으로, 추적자 농도에 대한 인터렉티브 시스템을 추가하여, 모델 구동 중에도 사용자가 수심적분된 추적자 농도를 조정할 수 있도록 하였다. 기수행된 2개의 수리실험 조건과 관측값을 이용하여 벤치마크 테스트를 수행하였으며, 관측값과 대체로 일치하는 것을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.433-441
• /
• 2006

With a development of electrical technology in recent, it is possible to measure distance without direct contact to object using laser which launched at instrument and reflect from object. Furthermore, the advent of non prism total station brought the increment of application in many fields including not only road, airport, and harbors but also measurement and monitoring of structural displacement in construction fields. In this study, therefore, to evaluate accuracy of non prism total station, accuracy was analyzed by measuring certain distance which classified by both certain materials and angle of reflection. By this method, the derived values were applied to topographical survey for the efficient applicability. According to a study, result value of non prism total station was satisfBctory regardless of material when the angle of reflection was 90 degrees. RMSE increased when the angle of reflection are gradually increased to acute angle. In result of regression analysis using certain distance which classified by both materials and angles of reflection, there is relationship between distance and angle of reflection, but material has no relevance to the result value. When carrying out general topographical survey, proper application of non prism total station will go far conducting safe and prompt survey at the dangerous site such a road which have lots of traffic flow and rock joint which have high angles of inclination.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.101-105
• /
• 2011

Determination of ultrasonic frequency and experimental design approach to optimization of ultrasonic soil-washing process for remediation of diesel contaminated soil were investigated. Ultrasonic frequencies of 35, 72, and 100 kHz were used for determination of optimal frequency. $MINITAB^{(R)}$ program was used for experimental design of optimal washing condition. The optimal ultrasonic frequency was 35 kHz. Even though the number of cavitation bubble is little, however cavitation bubbles involving larger energy compared with high frequency was generated. Therefore, the removal efficiency at low frequency was higher than at high frequency. However the input energy has to be considered when the process is applied. The statistical tests from a factorial experiment shows that the application of ultrasound and mechanical mixing are the most important factor for design of an ultrasonic soil washing process. The lab-scale experiments are required to get the optimal condition of ultrasound and mechanical mixing for application of ultrasonic soil washing process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.275-284
• /
• 2017

As the 3D Greenery system is known to improve the urban environment, it works as new alternative for eco-friendly building and warrants further study for application to the domestic field. This study aimed to apply the design components for eco-friendly composition by investigating the spatial characteristics of the 3D Greenery System reflected in interior and exterior of buildings and to analyze the organization and design elements of domestic and foreign cases. The results showed that instances of the Greenery System tended to be a large scale and high-density development in order to expand various exterior spaces. Although its early forms were often found in such public facilities as exhibition and education purpose, cases of multi-unit dwelling have been growing. Allowing apartment residents to prefer intimate space by providing various such spaces for residential units and offering independent green spaces would induce diverse residents' lifestyles rather than monotonous design. The analysis also indicated that community space composed of various outdoor spaces and atmosphere would change life patterns of multi-housing and establish a real neighborhood through social interaction. Moreover, further investigation of the design patterns of outdoor space arrangement is needed since the Greenery system actively reflects the environmental characteristics of building sites and clearly shows a tendency to utilize natural terrain and slope in building shapes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.35-44
• /
• 2009

In this study, we intended to develope a simulation program for assessing a building height whether or not acceptable for maintaining the visual quality of a forest landscape. A number of geographical factors were considered within the assessment procedure. As the visual quality of a landscape could vary according to the location of view points, we examined 3 methodologies for setting up the view points. The result for comparison between method of selecting viewpoints was not significantly effecting method of selecting viewpoints. Post hoc test showed a moderately large p-value and no significant differences between groups were observed. The result from a case study indicated that the simulation program is able to estimate an environmentally acceptable building height in an efficient manner. In this study, however, only the geographical factors were considered for the assessment, but forest dynamic information such as stand height was not considered. Thus, in the further study, forest stand height would be necessarily considered to estimate a more reliable and desirable building height.

• Journal of Practical Engineering Education
• /
• v.13 no.3
• /
• pp.559-566
• /
• 2021

The aggregate gradation analysis is a study that evaluates the accuracy of a specific purpose for the aggregate gradation analysis results essential for construction-related major education. This study is to evaluate the effect of aggregate moisture content on aggregate gradation analysis. The change in the moisture content of the aggregate stored in the asphalt plant cold bin and stock piles was monitored for one year, and based on the results, a sample of aggregate with different moisture content was produced. The gradation curve for each aggregate sample was analyzed to evaluate the effect of aggregate moisture content on aggregate gradation analysis. As a result of the gradation evaluation, it was confirmed that as the moisture content increased, the particle size error for particles less than 5 mm increased in the gradation analysis of the oven-dried aggregate, and this error increased as the particle size decreased. In addition, for aggregate particles of 5 mm or more, it was confirmed that the error in gradation analysis rapidly decreased due to the increase in the moisture content. An analysis was performed on the effect of the error in gradation analysis on the management of hot-bin aggregates in asphalt plants. As a result of the analysis, it was found that the minimum aggregate size of the first hot-bin in a general asphalt plant was 2.38 mm or more, so the maximum gradation error due to the non oven-dry aggregate was less than 2%. Therefore, it seems possible to use the results of the gradation analysis of cold bin non oven-dry aggregate for quality management of asphalt mixture production.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.499-504
• /
• 2008

Recently, the problem controlling lateral drift is important in tall buildings for improvement in economic efficiency and habitability. But, the Outrigger System, general used for tall building in Korea, has weak points with the occupancy of special space and the long duration of works. The dampers are applied to actively control building's response by earthquake and wind load in these days. Accordingly, we analyze the effect of the drift control using various dampers to substitute for the Outrigger System as the efficient system in tall buildings.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.561-566
• /
• 2009

The outrigger system with a core is widely used for lateral load resisting system of tall building. Recently, structural systems in tall building are adopted to eccentric core and offset outrigger or one-armed outrigger system by trends in planning buildings of irregular type. Therefore, the performance of outrigger system with eccentric core in tall building is evaluated by 50-stories examples which are analyzed for variables such as layout of core and outrigger, arm length of outrigger and depth of outrigger and belt wall.

• Korea Multimedia Society
• /
• v.9 no.3_4
• /
• pp.78-94
• /
• 2005

비사실적 렌더링은 인간 친화적인 영상을 생성하기 위해 사람이 손으로 그린듯한 느낌의 영상 생성을 목적으로 한다 좀더 넓은 범위에서의 의미는 사실감을 추구하지 않는 영상을 생성하는 모든 수단으로서 정의될 수 있으며, 따라서 사람이 손으로 그리기에 비현실적일 수 있는 영상의 형태까지도 포함된다. 80년대 말부터 90년대 초 연구결과가 주목받기 시작하면서 이후 10여년간 주목할만한 많은 연구내용들이 발표되어 왔다. 특히, 최근에는 상업적 측면에서의 관심이 증가하면서 애니메이션, 광고, 게임, 의료, 건축, 기계 등 다양한 분야에서의 요구가 증가하고 있다. 하지만 응용 분야의 특성 상 앞으로 해결해야 할 문제들이 많이 남아 있다. 본 논문에서는 비사실적 렌더링의 발전과 주요한 기술들에 대해서 설명한다. 또한 최근의 연구 동향을 바탕으로 앞으로의 발전 방향을 제시한다.