• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.181-185
• /
• 2017

In this paper, for Broadband Wireles LAN dual-band antenna was designed to satisfy the bandwidth of 2.32GHz and 5.79GHz. the substrate of proposed microstrip antenna is FR-4(er=4.3) and $34mm{\times}50mm{\times}1.5mm$ size and thickness t=0.035mm, and the simulation was used for CST Microwave Studio 2014. input return loss compared -10dB less than operates at and when gain 2.32GHz -19.321dB, 5.79GHz showed the results of -13.033dB. It increased impedance matching, minimized interference between adjacent frequencies, simplified small manufacturing methods, and demonstrated the characteristics of non-directional properties. Thus the proposed antenna satisfied the -10 dB impedancebandwidth requirement while simultaneously covering the Broadband Wireless LAN.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2010

Recently, interest in u-learning to pursue effective learning by using ubiquitous environment in teaching and learning activities. In u-learning environment, learners should be able to push necessary information at the right time and the right place. Also calm technology oriented to, and this means that it can recognize learners' terminal information and to provide adaptive interface. In u-learning environment, main learning terminals would be mobile terminals which support mobility. However, learning in the existing PC environment should not be excluded. Thus, by providing adaptive interface according to various learners' terminal in LMS for u-learning, learners are able to learn through consistent and natural learning interface with any computer or any network at any place and at any time. The purpose of this study is to propose the interface adaptation based on terminal information focusing on the layout transformation process in the development environment.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.81-81
• /
• 2010

전자 패키징은 미세화, 경량화, 저가화를 지향하고 신뢰성의 향상을 위해 발전해 왔다. 이러한 경향은 전자부품 자체의 성능 향상 뿐 아니라 전자부품을 장착, 고정할 수 있게 하는 인쇄회로 기판(PCB : Printed Circuit Board)의 성능에 많은 관심을 가지게 되었다. 전기적 신호의 손실을 줄이기 위해 전기, 전자 산업체에서는 가볍고 굴곡성이 우수한 연성인쇄회로기판(FPCB : Flexible PCB)과 가격이 싸고 신뢰성이 입증된 경성인쇄회로기판(RPCB : Rigid PCB)이 그 대상이다. 본 논문에서는 이 PCB중에서도 RPCB와 FPCB간의 열압착 방식으로 접합 시 전극간의 접합 양상을 보았다. 이 열압착 방식은 기존에 PCB를 접합하는데 사용하고 있는 connector를 이용한 체결법을 대체하는 기술로써 솔더를 중간층(interlayer)로 이용하여 열과 압력으로 접합하는 방식이다. 이 방식을 connector를 사용하는 방식에 비해 그 부피가 작고 I/O개수에 크게 영향 받지 않으며 자동화 공정이 쉬운 장점을 가지고 있다. 접합의 대상 중 RPCB의 경우는 무전해 니켈 금도금(ENIG : Electroless Nickle Immersion Gold)로 제작하였으며 FPCB의 경우는 ENIG와 유기보호피막(OSP : Organic solderability preservation) 처리하였다. 실험에 사용한 PCB는 $300\;{\mu}m$ pitch의 미세피치이며 솔더의 조성은 Sn-3.0Ag-0.5Cu (in wt%)과 Sn-3.0Ag (in wt%)를 사용하였다. 접합 온도와 접합 시간 그리고 접합 압력에 따라 최적의 접합 조건을 도출하였다. 접합 강도는 $90^{\circ}$ Peel Test를 통해서 측정하였으며 접합면 및 파괴면은 SEM과 EDS를 통하여 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.493-500
• /
• 2008

This paper describes a design of internal frequency modulation(FM) radio antenna fur mobile terminal. In order to control of impedance at an operating frequency of the designed antenna, the lumped constant elements of R and L chip components are used. Patch and stubs located at antenna backside are added to control an exact resonance frequency and miniaturization. A fabricated antenna sire, the measured return loss, impedance, bandwidth, and gain are $40{\times}70{\times}1$ mm, -23 dB at 99 MHz, $55-j7{\Omega}$, 22 MHz($88{\sim}110$ MHz) below -10 dB, and -15 dBi, respectively. These measured results show a good agreement with simulated results. Especially, the measured gain of fabricated antenna is similar with value of a conventional ear-phone antenna in the designed frequency band. The measured radiation pattern agrees well with the calculated omni-directional pattern.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.197-203
• /
• 2011

A triple-band antenna which can be used at GSM900, PCS1900 and Bluetooth(or Wi-Fi) frequency band is proposed. The proposed antenna is designed based upon switching between IFA(Inverted F Antenna) that has a resonant length of ${\lambda}/4$ and loop antenna that has a resonant length of ${\lambda}/2$. It can be applied to triple-band only by use of single printed pattern due to the switching characteristic. It is designed by use of the IFA for the application to the GSM900, while it is designed by use of the loop antenna for the application to the PCS1900 and by use of additional pattern of IFA for the application to the Bluetooth(or Wi-Fi) respectively. As a result, it has been observed that the proposed antenna satisfies the required return loss(${\leq}10dB$) and also has efficiency(${\geq}80%$) over the whole band. Moreover the proposed antenna has omni-directional radiation pattern which is suitable to apply to the mobile phone.

• Journal of KIISE:Software and Applications
• /
• v.41 no.8
• /
• pp.569-579
• /
• 2014

In a tactical-edge environment, where multiple weapon resources are coordinated together via services, it is essential to make an efficient binding between an abstract service and a resource that are needed to execute composite services for accomplishing a given mission. However, the tactical network that is used in military operation has low bandwidth and a high rate of packet loss. Therefore, communication overhead between services must be minimized to execute composite services in a stable manner in the tactical network. In addition, a tactical-edge environment changes dynamically, and it affects the connectivity and bandwidth of the tactical network. To deal with these characteristics of the tactical network we propose two service-resource reallocation methods which minimize the communication overhead between service gateways and effectively manage neutralization of gateways during distributed service coordination. We compared the effectiveness of these two - methods in terms of total communication overhead between service gateways and resource-allocation similarity between the initial resource allocation and the reallocation result.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.99-115
• /
• 2000

A geographic information system (GIS) generally has a great deal of geographic data and has a singular storage structure individually. It is very hard to exchange geographic data between geographic information systems which store their geographic data with incompatible formats. Moreover, since it needs large amount of storage space to store geographic data and expensive cost to input them. In this paper, we designed and implemented a SDTS (Spatial Data Transfer Standard) Data Conversion System for Gothic which is an existing geographic information system. In order to convert geographic data without loss of information, we first carefully define a mapping between SDTS data and Gothic data. Especially, since SDTS data are in the format of ISO8211, the FIPS123 library is used to access them. Because the internal data format of Gothic is not open to the public, we also use the Gothic library to access Gothic data. The SDTS data conversion system developed in this paper uses an intermediate file to convert geographic data efficiently. In addition, we use UIL (User Interface Language) to implement a graphic user interface (GUI) of our system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.286-290
• /
• 2017

In this paper, we have proposed a hexagonal patch UWB antenna with a band notch characteristic where the notch band of 5.15 ~ 5.85 GHz band of WLAN was induced by inserting a circular slit in the patch. The impedance bandwidth of the proposed antenna meet the band width criteria of UWB communication system where is mentioned as frequencies range form 3.1 ~ 11.8 GHz. The characteristic band at 5.2 ~ 5.8 GHz notch band was observed. The radiation pattern of the antenna shows a directinal radiation pattern at $0^{\circ}$ and $180^{\circ}$ in XZ-plane and YZ-plane is an omni-directional pattern, respectively. In addition, it is observed that increase in frequency results in increases of the antenna gain whereas the notch band section is decreased. The proposed antenna was designed TRF-45 substrate with thickness of 1.62 mm, a loss tangent of 0.0035, a relative permittivity of 4.5 and designed were used Ansys Inc. HFSS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.411-414
• /
• 2001

The rapid technical development is changing the environment in the telecommunications industry that is the convergence among technologies, the intensive competition, and so on. Standardization is the core issue in the telecommunications industry, and it is recognized the important strategy to preempt a market by all firms. The telecommunication industry has far-reaching effects to the other industries, so firms in the telecommunications industry compete intensively against one another build on early lead. Because the defeat in standardization competition cause the pertinent nation a great loss. Therefore it shows the intense competition from the early stage in the telecommunications industry. In this paper, we'll examin the change in environment in relation to standardization in the telecommunication and suggest the national policies of standardization.

• Journal of Digital Convergence
• /
• v.10 no.7
• /
• pp.141-152
• /
• 2012

The typical evacuation guidance system based on fire detectors, which is being widely used in theaters and large buildings, is often operated in an analog manner. In case of fire, it often causes the system to lose a wired line or wireless fire detection sensor, resulting in the difficulty of transmitting signals from a wired or wireless fire detection sensor to the main fire monitoring device. Accordingly, this paper has proposed the broadcasting system for disaster management, having an efficient evacuation guidance plan when a disaster occurs. The system reacts to an emergency situation along with fire alarm sirens in real time. We have implemented the above system by means of a simulation program that prints the evacuation guidance information (e.g., location and time of fire, and evacuation path) on an LCD located in a building through the fire sensor network in case of an emergency (e.g., actual fire). We have developed the simulation system by using mathematical algorithms, such as the optimal path search and the fire smoke diffusion algorithm. This simulation program considers the structure of a building and the location where the fire has initially occurred, applying it to the simulator.