• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.57-61
• /
• 2010

국내 지진해일에 관한 연구는 범람 여부의 예측과 이에 대한 대비에 관하여 중점적으로 이루어지고 있다. 하지만 구조물에 직접적으로 피해를 주는 파력에 관한 연구는 거의 전무한 실정이다. 특히, 지진해일 1차 대피소는 지진해일 내습에 의한 파력에 대하여 안정하게 설계되어야 한다. 이를 연구하기 위한 방법으로 수리모형실험과 3D 모형을 이용한 수치모형실험의 두 가지 방법이 있으나 시간과 비용이 많이 소요되고 실제 지형에 적용하기에 곤란하다는 단점이 있다. 따라서 본 연구에서는 장파에 의한 파력식과 기존의 2D 수치모형을 이용하여 실용적으로 파력을 계산할 수 있는 방법을 제시하고, 이를 국내 무역항 중 하나인 동해항에 적용하였다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.171-177
• /
• 2011

Tsunami forces acting on coastal structures have not been relatively much paid attention by researchers. However, they should be appropriately reflected in design of coastal and harbor facilities. The temporary and permanent tsunami shelters have to be chosen to resist stably against unexpected tsunami forces. There have been only few numerical studies on the tsunami forces acting on coastal and harbor structures. In this study, a practical prediction of tsunami forces is carried out by using a two-dimensional numerical model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.255-255
• /
• 2015

지진해일은 주기가 긴 파랑으로 방파제나 방호구조물에 의한 에너지 감소가 작은 특성이 있다. 또한, 범람구역의 구조물 밀집도 및 지형적 요인에 따라 범람영역, 침수심, 파력 등이 상이하게 나타나므로 유체흐름의 입체적 변화양상을 고려하여야 한다. 본 수리모형실험은 임원항을 대상으로 구조물에 작용하는 지진해일의 파력특성을 3차원수리모형실험을 통해 검토하고, 파력산정계수(${\alpha}$)를 제시한다. 3차원 수리모형실험은 1983년 동해 중부 지진해일 발생 시 국내에서 가장 큰 피해를 입은 임원항을 대상으로 배후부지의 구조물과 인근 해안의 지형을 1/100으로 재현하여 실험에 임하였다. 입사파랑은 고립파(solitary wave)로 재현하였으며, 천수(shoaling)에 의한 파고변화를 측정하고 그에 따른 배후부지의 침수심, 구조물에 작용하는 파력을 측정하였다. 분석된 파력 산정계수(${\alpha}$)는 임원항 인근 해역 및 배후부지의 방재대책 수립을 위한 기초자료로 활용될 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2B
• /
• pp.175-185
• /
• 2011

This study investigates tsunami force acting on a group of onshore structures numerically by using three-dimensional one-field model for immiscible multi-phase flows, which is based on Navier-Stokes solver. In particular, we studied on the characteristics of tsunami with respect to the arrangement of onshore structures and the distance from seawall trough numerical experiments. For validation of the numerical method used in this study to calculate tsunami force, numerical results for tsunami force on the structures in coastal area are compared with available experimental data. Furthermore, a detail study on the efficiency of the numerical method is performed for the estimation of tsunami force based on the hydrostatic and hydrodynamic methods in which the numerical results are used. The obtained results are compared to the previous experimental one and design criteria. Considering both experimental results and numerical analysis results, semi-empirical formula by regression analysis is proposed. As a result, it was confirmed that the numerical analysis is effective to estimate on tsunami force acting on onshore structures.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.5
• /
• pp.369-382
• /
• 2011

This study investigated the tsunami force acting on onshore structures using a numerical program, three-dimensional one-field model for immiscible multi-phase flows, which is based on Navier-Stokes solver. In this paper, the characteristics of tsunami of oil storage tank and house structures studied to the distance between the seawall and structure. In addition, the study compared and analyzed the tsunami forces determined by considering drag force only and considering both drag and inertia forces. These numerical results were compared with the design standard. As a results, the case of considering the both forces is more close to numerical result than that of considering the drag force only.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.149-159
• /
• 2016

In this study, the solitary wave-induced tsunami force acting on an onshore bridges in coastal area was numerically modelled by means of TWOPM-3D based on Navier-Stokes solver and VOF method which can track free surface effectively. The validity of numerical analysis was verified by comparing the experimental tsunami bore force acting on vertical wall and column structure. In particular, the characteristics of tsunami force with the changing tsunami intensity were surveyed through numerical experiments. The availability of 3-dimensional numerical analysis was reviewed through the comparison between the existing numerical results and design criteria for each drag force coefficient by applying Morison equation considering only drag force. As reasonable and high-precision estimation method of tsunami force, it was suggested to apply the estimation method taking drag and inertial force into consideration at the same time.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.289-301
• /
• 2009

In this work, wave run-up heights and resultant wave forces on a vertical revetment due to tsunami (solitary wave) are investigated numerically using a numerical wave tank model called CADMAS-SURF (CDIT, 2001. Research and Development of Numerical Wave Channel (CADMAS-SURF). CDIT library, No. 12, Japan.), which is based on a 2-D Navier-Stokes solver, coupled to a volume of fluid (VOF) method. The third order approximate solution (Fenton, 1972. A ninth-order solution for the solitary wave. J. of Fluid Mech., Vol. 53, No.2, pp.257-271) is used to generate solitary waves and implemented in original CADMAS-SURF code. Numerical results of the wave profiles and forces are in good agreements with available experimental data. Using the numerical results, the regression curves determined from the least-square analysis are proposed, which can be used to determine the maximum wave run-up height and force on a vertical revetment due to tsunami. In addition, the capability of CADMAS-SURF is demonstrated for tsunami wave forces acting on an onshore structure using various configuration computations including the variations of the crown heights of the vertical wall and the position of the onshore structure. Based on the numerical results such as water level, velocity field and wave force, the direct effects of tsunami on an onshore structure are discussed.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.64.1-64.1
• /
• 2010

국내 지진해일에 관한 연구 중, 구조물에 직접적인 영향을 미치는 파력에 대한 연구가 현재 미미한 실정이다. 본 연구에서는 파고와 입사각, 그리고 유의주기를 기지값으로 하여 파압을 계산하는 Goda(1974)가 제안한 파압공식을 이용하여 파압을 산정하였다. 파고는 Cho(1995) 모델로 산정하였으며 이를 임원항구의 방파제에 적용하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.363-368
• /
• 2017

The tsunami flood the coastal cities and damage the land structures. The study on wave pressure and force on land structures is one of the important factors in designing the stability of inland structures. In this study, two - dimensional wave flume tests on the horizontal wave force and pressure of tsunamis on a simplified box-type structure was conducted. Vertical distribution and wave power of horizontal wave pressure over time were measured by pressure sensors and force transducer. Also, those were measured from the different wave breaking types. The vertical distribution of horizontal wave pressure was uniform at the moment when the horizontal wave force to the structure was maximum under the breaking wave condition. A surf similarity parameter was employed in order to figure out the relationship between the maximum horizontal wave force on the structure as a function of various incident wave conditions. As a result, the non - dimensionalized horizontal wave force tends to decrease exponentially as the surf similarity parameter increases.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.31-45
• /
• 2012

This study was conducted to estimate the stability of a quay wall in case of wave overtopping under the combined action of an earthquake and tsunami using limit equilibrium method. The tsunami force was calculated by using a numerical program called TWOPM-3D (3-D one-field Model for immiscible TWO-Phase flows). Especially, the wave force acting behind the quay wall after a tsunami wave overtopping was estimated by treating back fill as a permeable material. The stability of the quay wall was assessed for both the sliding and overturning modes under passive and active conditions. The variation in the stability of the quay wall with time was determined by parametric studies, including those for the tsunami wave height, seismic acceleration coefficient, internal friction angle of the soil, wall friction angle, and pore water pressure ratio. When the earthquake and tsunami were considered simultaneously, the tsunami induced wave overtopping increased the stability of the quay wall under the passive condition, but in the active condition, the safety factors decreased.