• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.113-118
• /
• 1998

1994년 7월 25일 발생한 황해남부 지진(Mb=5.5)의 지진원 요소들을 결정하였다. 지진원 요소들을 결정하기 위하여 이 지진에 대하여 이전의 연구에서 얻어진 지진발생기구를 사용하였다. 지진발생기구에 의하면, 이 지진은 거의 동서방향의 압축응력장에 주향이동성분이 가미되어 발생한 것을 암시한다. 지진원 요소들은 단주기 및 장주기 P파에 대한 원지장 스펙트럼으로부터 계산되었다. 지진모멘트(M0), 코너주파수(f0), 지진원 반경(r) 및 응력강하량($\Delta$$\sigma$)은 각각 M0 = 3.18$\times$1024 dyne-cm, f0=0.3 Hz, r=3.7km, $\Delta$$\sigma$=27bar로 구해졌다. 지진모멘트로부터 산정한 모멘트 규모는 5.6으로 나타났다.

• The Journal of Engineering Geology
• /
• v.19 no.4
• /
• pp.509-515
• /
• 2009

Three earthquakes with local magnitude ($M_L$) greater than 3.0 occurred on April 24, June 2 and September 12 in 1999 nearby the Gyeongju area. Redetermined epicenters were located within the radius of 1 km. We carried out waveform inversion analysis to estimate focal mechanism of June 2 event, and P and S wave polarity and their amplitude ratio analysis to estimate focal mechanisms of April 24 and September 12 events. June 2 and September 12 events had similar fault plane solutions each other. The fault plane solution of April 24 event included those of other 2 events, but its distribution range was relatively broad. Focal mechanisms of those events had a strike slip faulting with a small normal component. P-axes of those events were ENE-WSW which were similar to previous studies on the P-axis of the Korean Peninsula. Considering distances between epicenters, similarities of seismic waves and sameness of polarities of seismic data recorded at common seismic stations, these events might occurred at the same fault. The seismic moment of June 2 event was estimated to be $3.9\;{\times}\;10^{14}\;N{\cdot}m$ and this value corresponded to the moment magnitude ($M_W$) 3.7. The moment magnitude estimated by spectral analysis was 3.8, which was similar to that estimated by waveform inversion analysis. The average stress drop was estimated to be 7.5 MPa. Moment magnitudes of April 24 and September 12 events were estimated to be 3.2 and 3.4 by comparing the spectrum of those events recorded at common single seismic station.

• Journal of the Korean earth science society
• /
• v.27 no.3
• /
• pp.341-347
• /
• 2006

Focal mechanisms were analyzed for the seven earthquakes which occurred in the southwestern part of the Korea Peninsula from 2001 to 2005. Grid searches are performed to fit distributions of P-wave first-motion polarities and SH/P amplitude ratios for each event. The focal mechanism solutions imply that most of the events have strike-slip sense including partially thrust component. The compressional axes of the solutions are predominantly ENE-WSW or NE-SW indirections. This result is similar to the directions of the principal compressional axes for major earthquakes occurred around the Korea Peninsula.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.505-505
• /
• 2023

지진해일의 발생빈도는 태풍이나 홍수 등의 자연재해와 비교하여 발생빈도가 낮지만 발생 시 큰 피해를 입힐 수 있다. 우리나라 동해안은 일본 서해안에서 발생된 지진해일에 취약하며 특히 강원도 삼척시와 경상북도 울진군 부근은 일본 서해안에서 발생된 지진해일 에너지가 집중되는 위험지역으로 기존 연구에서 확인되었다. 동해를 따라 먼 거리를 전파해오는 지진해일 파의 전파양상은 해저수심의 영향을 받아 변화될 뿐만 아니라 진원지의 발생위치와 각 매개변수의 특성에 따라 대상지역에서의 영향도가 다양하게 나타날 수 있다. 본 연구에서는 일본 서해안에서 과거 발생한 지진원(4건) 및 향후 발생 가능한 가상지진원(71건)을 대상 시나리오로 선정하였으며, 가상지진원자료는 한반도 에너지개발 기구(11건) 및 일본토목학회(60건)에서 제시한 총 71건의 자료를 사용하였다. 동해안 해저수심 영향에 의한 지진해일 파 집중도를 확인할 수 있는 파향선추적 기법 수행을 통해 75건 중 집중도가 높은 41건의 지진원을 선정하였다. 선정된 지진원은 불확실성을 고려하기 위해 많은 연구자들에 의해 사용되고 있는 로직트리기법을 적용하여 총 1,107건으로 생성되었으며, 이에 대해 지진해일 수치해석이 수행되어졌다. 최대 지진해일고 비교 결과, 특정 발생위치에서의 지진원은 타 지진원보다 지진강도가 작음에도 불구하고 울진 원자력발전소에서 최대 지진해일고 결과는 더 크게 나타나는 것으로 확인되었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.6
• /
• pp.33-39
• /
• 2007

The seismic source parameters of the Uljin earthquake on 29 May 2004, including focal depth, focal mechanism, magnitude, and moment tensor elements for source characteristics, are analysed using moment tensor seismic source inversion. The Green‘s function for 3 crust models representing the southern Korean Peninsula are used. Also 3 kinds of epicenters are used to find optimum solution for seismic source parameters. Results show that seismic source parameters have a little dependency of azimuthal distribution and epicentral distances of seismic stations. Final results show that the event, considering 6 moment tensor elements, is caused by the typical reverse fault with nearly NS strike. The focal mechanism implies that the tectonic force around epicenter area currently has compressive environment, with nearly EW principal axis. The focal depth is estimated to be about 12km. The resultant focal mechanism show fairly good agreement to those of other studies. However, focal depth is much different from that of other studies.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.673-680
• /
• 2007

The seismic source parameters of the Odaesan earthquake on 20 January 2007, including focal depth, focal mechanism, magnitude, and source characteristics, are analysed using seismic moment tensor inversion. The Green's function for different 3 crust models representing the southern Korean Peninsula are used. Final results show that the event, considering 6 seismic moment tensor elements, is caused by the typical strike slip fault with nearly NNE strike. The focal depth is estimated to be about 11km and 6 seismic moment tensor elements with 7.2% CLVD value shows typical double couple seismic source. The consistent characteristics of the strike and epicenter of the event with Odaesan fault imply that Odaesan earthquake is mainly caused by movement of the Odaesan fault.

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.51-58
• /
• 2005

• Journal of the Korea Construction Safety Engineering Association
• /
• s.24
• /
• pp.59-68
• /
• 1997

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.5
• /
• pp.23-29
• /
• 2009

On December 13, 1996, an earthquake with local magnitude (M$_L$) 4.5 occurred in the Yeongwol area of South Korea. The epicenter was 37.2545$^{\circ}$N and 128.7277$^{\circ}$E, which is located inside the Okcheon Fold Belt. The waveform inversion analysis was carried out to estimate source parameters of the event according to the filtering bandwidth of seismic data. Using 0.02$\sim$0.2 Hz filtering bandwidth, focal depth and seismic moment were estimated to be 6 km and 1.3$\times$10$^{16}$ N$\cdot$m, respectively. This seismic moment corresponds to the moment magnitude (M$_W$) 4.7. The focal mechanism by the waveform inversion and P wave first motion polarity analysis is a strike slip faulting including a small thrust component, and the direction of P-axis is ENE-WSW. The moment magnitude estimated by spectral analysis was 4.8, which is similar to that estimated by waveform inversion. Average stress drop was estimated to be 14.3 MPa.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.274-281
• /
• 2011

We analysed ground motions form Mw 4.3 earthquake around Backryoung Island for the seismic source focal mechanism and horizontal response spectrum. Focal mechanism of the Backryoung Islands area was compared to existing principal stress orientation of the Korean Peninsula and horizontal response spectrum was also compared to those of the US NRC Regulatory Guide (1.60) and the Korean National Building Code. The ground motions of 3 stations, including vertical, radial, and tangential components for each station, were used for grid search method of moment tensor seismic source. The principal stress orientation from this study, ENE-WSW, is consistent fairly well with that of the Korean Peninsula. The horizontal response spectrum using 30 observed ground motions analysed and then were compared to both the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings (1997). Response spectrum of 30 horizontal ground motions were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that the horizontal response spectrum revealed higher values for frequency bands above 3 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed higher values for the frequency bands below 0.8 second than the Korean Standard Response Spectrum (SD soil condition). However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the higher frequency bands.