• The Korean Journal of Applied Statistics
• /
• v.31 no.3
• /
• pp.353-366
• /
• 2018

This study uses mixed-effects models to predict thigh soft tissue artefact (STA), relative movement of soft tissue such as skin to femur occurring during hip joint motions. The random effects in the model were defined as STA and the fixed effects in the model were considered as skeletal motion. Five male subjects without musculoskeletal disease were selected to perform various hip joint rotational motions. Linear mixed-effects models were applied to markers' position vectors acquired from non-invasive method, photogrammetry. Predicted random effects showed similar patterns of STA among subjects. Large magnitudes of STA appeared on the points near the hip joint regardless of sides; however, small values appeared on the distal anterior.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.83-90
• /
• 2018

Considering the increased threats from worldwide terrors and the increased demands on the blast resistant design of commercial buildings, this study is aimed at understanding the basic concept of blast resistant design and evaluating the blast performance with an actual design example. Although there are many differences between earthquake and blast loads, the design concept against both loads is similar in terms of allowing the plastic behavior of a structure and sharing the ductile detailing. Through the blast performance evaluation of a target building provided in this study, it is noted that a well-designed building for the conventional loads can have a certain level of blast resistance. However, this cannot be generalized since the blast load on a structure varies depending on the type of weapon, TNT equivalence, standoff distance, etc. Architectural planning with positioning the sacrificial structure or maintaining a sufficient standoff distance from the expected detonation is the simple and effective way of improving the blast resistance of a building.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1807-1811
• /
• 2009

홍수기 유량측정에 있어서 가장 큰 어려움이었던 유속측정의 정확성을 확보하고 실무자의 안전성을 보장하기 위한 기본 취지에서 1993년 시작된 "대하천 유량 자동측정 설비개발"이라는 연구 주제하에 비접촉식 유속측정 기법에 대한 연구를 수년간 연구개발을 거듭한 결과물인 전자파표면유속계를 1999년도에 상품화하여 현재 국내에서 홍수유속측정 설비로 이용되어지고 있다. 현장에서 유량측정업무에 종사하는 실무자들은 홍수유량측정에 비하여 훨씬 간편함을 몸소 느끼게 되었고, 상품화보급이 시작된지 수년이 지난 상태에서는 더욱 성능이 개선된 전자파표면유속계가 개발되기를 기대하였다. 무엇보다도 홍수기에 유량측정시 기존의 유속측정 방법과 같은 방식으로 각 측선마다 전자파표면유속계를 설치해야하는 번거로움을 피력하였다. 기존의 전자파표면유속계는 하천을 가로지르는 교량위에서 흐름방향에 나란히 측정하는 조건을 고려하였기 때문에 이와 같은 편각인 상태의 유속측정은 검토하지 않았다. 이와 같은 사용자의 요구에 대하여 한국수자원공사에서는 홍수기 유량측정시의 사용자 편의성을 증대하기 위하여 성능개선 작업에 착수하여 편각측정용 전자파표면유속계를 개발하였다. 편각측정의 주된 목적은 전자파표면유속계를 모든 측선에 설치하지 않고 한 지점에서 편각(oblique angle)으로 여러 측선의 유속을 측정함으로써 유속측정의 효율성을 증대시키는 것이다. 전자파표면 유속계에서의 편각 측정은 하천의 유속 방향을 기준으로 정면에서 측정하면 수평 편각이 0도가 되며 좌우로 안테나를 회전하여 움직인 각도가 측정 편각으로 결정된다. 전자파의 물리적 특성 때문에 편각이 증가하면 반사된 신호의 수신 크기가 감소하여 측정이 불가능하게 된다. 이러한 문제를 최대한 극복하는 것이 본 연구의 중점 개선사항이다. 이를 통하여 전자파표면유속계를 교량의 임의 지점에 설치하여 좌우로 편각 $20^{\circ}$에 이르는 범위의 유속을 측정하고자 목표로 하였다. 홍수시의 현장 측정 환경은 열악하기 때문에 정확한 측정을 조건으로 측정자에게 최대한의 편리함과 신속한 측정 환경을 제공해야 효과적인 업무수행이 가능하다. 이러한 편각 측정을 가능토록 하기 위해서는 유속측정시 송신되는 전자파의 출력을 기존의 시스템보다 보다 높게 발사하여야 하며 안테나의 수신감도 및 지향성이 개선되어야 한다. 이를 위해서 안테나 형태에 있어 기존 전자파표면유속계와의 차이점은 기존안테나는 파라볼릭 형상이었으나 신규 제작된 안테나는 평면안테나로 이러한 형태의 개선를 통해 안테나 특성 및 구조적인 차이를 유도하였다. 두 가지 안테나 사양 각각 장단점이 있으나 가장 큰 차이점은 빔폭 특성에서 평면 안테나가 우수하며 수신 감도를 향상시킬 수 있다는 강점이 있다. 특히 Tx/Rx 분리의 평면안테나 구조는 파라볼릭 안테나에서 불가능한 기능으로서 편각측정으로 인한 수신감도의 저하의 문제를 해결하기 위한 개선조치이었다. 성능개선 제작된 편각측정용 전자파표면유속계를 이용하여 일반하천의 홍수유속에 대한 편각측정 실험을 안성천에서 실시한 결과 유속 약 1.7 m/s 인 상황에서 편각 $20\;^{\circ}$ 까지 편각 $0\;^{\circ}$일때와 유사한 측정 성능을 보였다.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.337-347
• /
• 2011

In this study, seismic resistance of concrete encased U-shaped steel beam-to-steel H-shaped column connections was evaluated. Three specimens of the beam-to-column connection were tested under cyclic loading. The composite beam was integrated with concrete slab using studs. Re-bars for negative moment were placed in the slab. The primary test parameter was the details of the connections, which are strengthening and weakening strategies for the beam end and the degree of composite action. The depth of the composite beams was 600mm including the slab thickness. The steel beam and the re-bars in the slab were weld-connected to the steel column. For the strengthening strategy, cover plates were weld-connected to the bottom and top flanges of the steel beam. For the weakening strategy, a void using styrofoam box was located inside the core concrete at the potential plastic hinge zone. The test results showed that the fully composite specimens exhibited good strength, deformation, and energy dissipation capacities. The deformation capacity of the beam exceeded 4% rotation angle, which is the requirement for the Special Moment Frame.

• Progress in Medical Physics
• /
• v.18 no.3
• /
• pp.118-125
• /
• 2007

In this study we estimated a geometric correlation among digitally reconstructed radiographic image (DRRI), kV x-ray image (kVXI) from the On-Board Imager (OBI) and electric portal image (EPI). To verify geometric correspondence of DRRI, kVXI and EPI, specially designed phantom with indexed 6 ball bearings (BBs) were employed. After accurate setup of the phantom on a treatment couch using orthogonal EPIs, we acquired set of orthogonal kVXIs and EPIs then compared the absolute positions of the center of the BBs calculated at each phantom plane for kVXI and EPI respectively. We also checked matching result for obliquely incident beam (gantry angle of $315^{\circ}$) after 2D-2D matching provided by OBI application. A reference EPI obtained after initial setup of the phantom was compared with 10 series of EPIs acquired after each 2D-2D matching. Imaginary setup errors were generated from -5 mm to 5 mm at each couch motion direction. Calculated positions of all center positions of the BBs at three different images were agreed with the actual points within a millimeter and each other. Calculated center positions of the BBs from the reference and obtained EPIs after 2D-2D matching agreed within a millimeter. We could tentatively conclude that the OBI system was mechanically quite reliable for image guided radiation therapy (IGRT) purpose.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.257-264
• /
• 1989

In order to study spatial variability of soil chemical properties across the land-partitioned boundary on Hwadong silt clay loam soil (Fine clayey, mixed, mesic family of Aquic Hapludalfs) in the experimental fie ld of the wheat and Barley Research Institute in Suwon, all measured data were analyzed by means of kriging, fractile diagram, smooth frequency distribution, and autocorrelation. Sampling for soil chemical property analysis was made at 225 intersections of 15x 15 grid with 10m interval from three soil depths (0-10cm, 25-35cm, 50-60cm) in the seven patitioned fields. 1. The coefficient of variance (CV) of various chemical properties varied from 5.4 to 72.7%. Soil pH was classified into the low variation group with CV smaller than 10%, while the other chemical properties belonged to the medium variation group with C.V. between 10 and 100% 2. The approximate number of soil samples for the determination of various chemical properties with error smaller than 10% were two for pH, ten for CEC, 15 for exchangeable Ca, 32 for total nitrogen content, 39 for exchangeable Mg, 40 for exchangeable K, 61 for exchangeable Na, 82 for organic matter content, 212 for available phosphate,. 3. Smooth frequency distribution and fractile diagram showed that available phosphate was in log-normal distribution while others were in normal distribution. 4. Serial correlation analysis revaled that the soil chemical properties had spatial dependence between two nearest neighbouring grid points. Autocorrelation analysis of chemcial properties measured between the serial grid points in the direction of south to north following land-partitioned boundary showed that the zone of influence showing stationarity ranged from 20 to 50m. In the direction of east to west accross land-partitioned boundary, the autocorrelogram of many chemical properies showed peaks with the periodic interval of 30m, which were similar to the partitioned land width. This reveals that the land-partitioned boundary causes soil variability.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.5-24
• /
• 2022

The current performance evaluation of slope anchors qualitatively determines the physical bonding between the anchor head and ground as well as cracks or breakage of the anchor head. However, such performance evaluation does not measure these primary factors quantitatively. Therefore, the time-dependent management of the anchors is almost impossible. This study is an evaluation of the 3D numerical model by SfM which combines UAS images with terrestrial LiDAR to collect numerical data on the damage factors. It also utilizes the data for the quantitative maintenance of the anchor system once it is installed on slopes. The UAS 3D model, which often shows relatively low precision in the z-coordinate for vertical objects such as slopes, is combined with terrestrial LiDAR scan data to improve the accuracy of the z-coordinate measurement. After validating the system, a field test is conducted with ten anchors installed on a slope with arbitrarily damaged heads. The damages (such as cracks, breakages, and rotational displacements) are detected and numerically evaluated through the orthogonal projection of the measurement system. The results show that the introduced system at the resolution of 8K can detect cracks less than 0.3 mm in any aperture with an error range of 0.05 mm. Also, the system can successfully detect the volume of the damaged part, showing that the maximum damage area of the anchor head was within 3% of the original design guideline. Originally, the ground adhesion to the anchor head, where the z-coordinate is highly relevant, was almost impossible to measure with the UAS 3D numerical model alone because of its blind spots. However, by applying the combined system, elevation differences between the anchor bottom and the irregular ground surface was identified so that the average value at 20 various locations was calculated for the ground adhesion. Additionally, rotation angle and displacement of the anchor head less than 1" were detected. From the observations, the validity of the 3D numerical model can obtain quantitative data on anchor damage. Such data collection can potentially create a database that could be used as a fundamental resource for quantitative anchor damage evaluation in the future.

• Economic and Environmental Geology
• /
• v.19 no.1
• /
• pp.67-83
• /
• 1986

Oriented hand samples were collected from Gobangsan Formation and Nogam Formation in the north of Danyang and south of Yeongchun, from Bansong Group in and around Danyang, from Nampo Group in Chungnam Coalfield, from Gyeongsang Supergroup distributed from Waegwan through Daegu to Gyeongsan and from Daegu to Goryong, and from volcanic flows in Jeongog area and Jeju Island to study the paleomagnetism of southern Korea since Permian. Stepwise alternating field and thermal demagnetization experiments were carried out to determine optimum fields and temperatures. Observed mean paleomagnetic directions are as follows: $D=331.5^{\circ}$, $I=25.1^{\circ}$, $a95=12.8^{\circ}$ for Permian, $D=325.6^{\circ}$, $I=46.1^{\circ}$, $a95=11.8^{\circ}$ for Triassic, $D=313.4^{\circ}$, $I=43.1^{\circ}$, $a95=16.0^{\circ}$ for early Jurassic, $D=41.3^{\circ}$, $I=64.6^{\circ}$, $a95=4.5^{\circ}$ for early Cretaceous, $D=28.3^{\circ}$, $I=58.1^{\circ}$, $a95=2.3^{\circ}$ for late Cretaceous, $D=2.0^{\circ}$, $I=55.8^{\circ}$, $a95=6.6^{\circ}$for Quaternary. To describe the tectonic translocation of southern Korean block, northern Eurasian continental block was used as a reference frame. For each age since Permian the expected northern Eurasian field directions in terms of paleolatitude and declination were calculated. The paleolatitudes of Permian ($13.2^{\circ}N$) and early Jurassic ($25.1^{\circ}N$) obtained from the study area are quite different from those of Permian ($66.0^{\circ}N$) and early Jurassic ($68.1^{\circ}N$) which are expected for northern Eurasia. The declinations of Permian ($331.5^{\circ}$) and early Jurassic ($313.4^{\circ}$) are also quite different from those of the Permian ($56.6^{\circ}$) and the early Jurassic ($47.5^{\circ}$) expected for northern Eurasia. The Cretaceous paleolatitude is similar to the expected within error limit, but the declination for the same period is significantly different from that of the expected for the northern Eurasia. From the above evidences it is suggested that the south Korean land mass had moved from low latitude in Permian to north and sutured to northern continental block since early Jurassic. The relative rotations of early Cretaceous($27.4^{\circ}$) and late Cretaceous($10.8^{\circ}$) to northern Eurasian continent reveal that the Korean land mass might be rotated clockwise in two different times, probably in late Early Cretaceous and in Tertiary.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.80-80
• /
• 2017

국내에서 대부분 생산되는 사료(사일리지) 수확 작업은 베일 생산 및 비닐 래핑 작업이 독립적으로 수행되고 있어서 비효율적이다. 본 연구에서 개발한 조사료 수확기는 수집, 롤링, 베일 네트 생성, 래핑, 래핑 종료 및 베일 방출작업을 통합적으로 수행하도록 설계-제작하였다. 통합형 다목적 조사료수확기의 설계는 3D 디자인 툴 (CATIA V5R18)을 이용하여 실시하였으며, 기구부 23 파트 어셈블리, 전기제어 어셈블리, 유압요소기술을 통합하여 통합시작기를 제작하였다. 기초 프레임, 오거장치파트, 픽업장치파트, 하부롤러파트, 상부롤러파트, 하부 프레임 및 주행부 파트, 래핑회전파트, 롤러부 구동 동력부, 유압파트, 전기제어파트, 드로우바파트, 체결 및 컨트롤러 파트 등 25개 파트로 구성되어 있다. 본 연구에서 개발한 시작기의 견인력 및 소요동력 분석은 선행 연구에서 사용한 Brixius (1987) 제안 모델을 체택하여 분석하였다. 이 Brixius 제안 모델은 견인력 예측에서 토양변수 및 토양강도 특성을 나타내는 원추지수 (Cone Index, CI)를 이용하여 트랙터의 견인력 예측에 사용하였다. 또한 트랙터-조사료수확기 시스템의 소요 견인력을 예측하는데 있어, 트랙터-조사료수확기 시스템이 운용되는 토양조건과 트랙터의 마력에 따른 소요 견인력 특성을 분석하기 위해 대표적으로 3수준의 토양조건 (CI: 356 kPa, 543 kPa, 1,429 kPa)을 적용하였으며, 베일의 개당 최대무게는 최고 수준인 옥수수 기준으로 800 kgf를 적용하였다. 본 연구에서 적용된 3수준의 CI 조건은 연구팀에서 선행연구과정 (토양특성에 따른 최적 경운작업 시스템 개발, 2006)에서 분석한 전국 10개 지역의 33개 지점의 경반층 CI지수의 측정범위인 1,050-3,170 kPa에 대해 견인력이 많이 소요되는 열악한 조건 수준을 적용하였다. 각 작업에 사용된 소요동력은 베일 작업시 (ASABE D497.7, 2011) 그리고 래핑작업시 (Zhortuylov et al., 2013)를 사용하였으며 두 소요마력을 트랙터-조사료 수확기 시스템의 필요 소요마력의 합계로 계산하였다. 트랙터-조사료수확기 시스템의 최소 소요 동력, 차축 소요 동력과 PTO 소요 동력을 Zoz and Grisso (2003)을 이용하여 계산하였다. 연구에서는 기본적으로 ASAE의 작업속도 및 작업효율을 적용하였는데, 적용된 조사료수확기의 현장 작업효율은 60-86%의 범위이고 일반적으로 70%를 적용하고 이때 작업속도는 2.5-8.0 km/h이며 전형적으로 5.0 km/h를 기준하고 있다. 자주식 (SP; sief-propelled machine) 조사료수확기의 경우 작업속도가 2.5-10.0 km/h의 범위에서 작업효율은 60-85% 범위이다. 적용되는 조사료 수확기의 작업효율인 60-85% 범위에서 일반적으로 적용되는 작업효율인 70%를 적용하면 트랙터의 소요동력은 95hp를 적정 작업환경으로 하였다.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.231-237
• /
• 1986

Samples of porphyries, andesites, decites and sandstones were collected from 14 sites in order to study paleomagnetism and to determine K-Ar age in Guryongpo area. K-Ar age dating indicates that porphyries and volcanic rocks formed 41.7 and 22.7~19.4Ma, respectively. The mean direction of remanent magnetization for each site was generally well grouped after alternating field demagnetization. Both normal and reversed directions are present. The mean magnetic direction of the porphyries of Late Eocene and that of the volcanic rocks of Late Oligocene to Early Miocene have similar, easterly declinations. Overall magnetic direction is $Dm=43.8^{\circ}$, $Im=53.5^{\circ}$, ${\alpha}95=12.2^{\circ}$. the reliability of the observed paleomagnetic directions is ascertained by the presence of normal and reversed polarities. This is also conformed by the similarity of the declinations of the normal and reversed polarities. Observed easterly declinations in this area are attributed to local clockwise rotation of the land mass by approximately 40~50 degrees since early Miocene.