• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.51-56
• /
• 2002

Russell-Silver syndrome is a type of intrauterine growth retardation, characterized by short stature noted at birth, hemiatrophy or asymmetry, variation in sexual development and other abnormalities, including cafe-aulait pigmentation and clinodactyly. Facial features commonly associated with this syndrome are a small triangular face, decreased facial height, down-turned corners of the mouth(shark's mouth), a small mandible, and occasionally asymmetry. The major intra-oral features of the syndrome that have been reported are a high-arched palate, delayed tooth eruption, microdontia, hypodontia, and crowding. These cases were diagnosed at birth as Russell-Silver syndrome by clinical features such as prenatal growth retardation, short stature, low body weight, et al., and have been treated with growth hormone. The purpose of this paper is to report the dental findings of two patients and review the pertinent literature through the two cases.

• Clinical and Experimental Pediatrics
• /
• v.52 no.3
• /
• pp.351-355
• /
• 2009

Purpose : This study compared bone ages measured by the Greulich-Pyle (GP) and Tanner-Whitehouse 3 (TW3) methods and investigated the differences in predicted adult heights measured by Bayley-Pinneau (BP) and TW3 methods. Methods : Bone ages were assessed from left-wrist radiographs by two investigators, one for each GP and TW3 methods in 85 normal children, 30 precocious puberty girls, and 30 constitutional growth delay boys. The differences between the measured predicted adult heights using the BP and TW3 methods were compared in each group. Results : The bone age measured by the TW3 method was less than that by the GP method in normal children. The predicted adult heights measured by the two methods showed no significant difference in normal boys, while the predicted adult height measured by the TW3 method was higher than that by the BP method for normal girls ($156.4{\pm}4.7$ cm vs. $158.9{\pm}3.8$ cm, P<0.01) and for precocious puberty girls ($156.3{\pm}4.0$ cm vs. $159.3{\pm}4.2$ cm, P<0.01). In contrast, the predicted adult height was higher from the BP method than from the TW3 method in constitutional growth delay boys ($173.3{\pm}4.4$ cm vs. $169.7{\pm}3.2$ cm, P<0.01). Conclusion : There were significant differences in predicted adult heights between the BP and TW3 method in normal girls, precocious puberty girls, or constitutional growth delay boys. In precocious puberty and constitutional growth delay, the BP method might be preferred to predict adult height, but further studies on final adult height are needed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.42-51
• /
• 2001

The effects of pre-indentation technique are presented for A12024-T3 Alclad alloy using as skin material for aircraft fuselage and wing. Indentations were applied to specimens to be placed on the presumed path of fatigue crack growth before fatigue tests. Tension-tension fatigue tests were conducted on the edge cracked specimens in the L-T orientation. Test results were analyzed to investigate the effectiveness of pre-indentation with the variation of specimen's thickness, position of indentation and applied maximum stress. Fatigue crack retardation by pre-indentation is well recognized in the various conditions.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.13-20
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a non-liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.82-89
• /
• 2012

In order to clarify the effect of overload on crack growth behaviors, fatigue tests for overload were carried out for round plain specimens of SM45C steel. In the experiment, typical semi-elliptical crack shape was found and further crack growth behaviors were tested. Using three types of single overload fatigue tests, Crack growth retardation phenomenon were examined. The growth rate of surface crack(da/dN) during retardation period was analyzed in terms of ${\Delta}K$ and ${\Delta}K_{eff}$. On the growth rate of surface crack analyzed by ${\Delta}K$, the dependence of overload stress levels appears. However, on the growth rate by ${\Delta}K_{eff}$ obtained by Willenborg analysis, there is a liner relationship between da/dN and ${\Delta}K_{eff}$ with narrow scatter band.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.30-36
• /
• 1992

In order to measure the characteristics of Surface Acousitc Wave(SA W) with compositions of $LiNbO_3$ single crystal, $128^{\circ}$ Y cut wafer was fabricated from $LiNbO_3$ single crystals with the composition range of 47-50 $Li_2O$mol%. Delay lines were formed on the $128^{\circ}$ Y cut wafer using photolithography technique. Delay time was measured by pulse-echo overlap method. The compositional dependence of SAW characteristics, SAW velocity, electro-mechanical coupling coefficient$(K_s^2)$ and temperature coefficient of delay time(TCD), were investigated.

• Journal of the Korea Society of Computer and Information
• /
• v.1 no.1
• /
• pp.195-210
• /
• 1996

For predicting the parameters and estimating the goodness of fit reliability growth model based on NHPP(Non Homogeneous Poission Process) among various reliability growth models, a Delayed S Shaped SRGM Tool is designed and Implemented. The Implemented tool is applied to real software error data, and the result Is compared and annalized.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.3
• /
• pp.249-254
• /
• 1988

This studies were carried out to investigate the effect of ing redients of Kimchi such as garlic, ginger and leek on the fermentation of Kimchi. The effect of ingredients on the growth of lactic acid bacteria isolated from Kimchi and on the fermentation of salted chinese cabbbage and Kimchi were also investigated. The lactic acid bacteria isolated from Kimchi were identified as Lactosaciffeg plantaruut, Lactobacillus brevis, Leuconostoc mesenteroides and Pediococus cerevisiae. The growth of these oreanismg was inhibited by garlic or ginger. Inhibitory effect of ginger or was more significant than that of garlic in the broth medium extracted from chinese cabbage at $37^{\circ}C$. The fermentation of salted chinese cabbage was inhibited by addition of garlic or ginger at $25^{\circ}C$. The fermentation of salted chinese cabbage inhibited during only first days and accerlated thereafter by addition of garlic. The fermentation of mixed in gredients added Kimchi was inhibitedduring 1 to 2 days compared with that of ingredients not added Kimchi. The inhibitory effect of ingredients on fermentation was due to growth inhibition of the lactic acid bacteria at initial period of fermentation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.126-136
• /
• 1999

We studied on crack growth retardation in single overloading condition. Crack tip branching which as the second mechanism on crack growth retardation was examined. Crack tip branching was observed to kinked type and forked type. It was found that the branching angle range was from 25 to 53 degree. The variations of crack driving force with branching angle were calculated with finite element method The variation of {{{{ KAPPA _I}}}}, {{{{ KAPPA _II}}}} and total crack driving force(K) were examined respectively So {{{{ KAPPA _I}}}}, {{{{ KAPPA _II}}}} and K mean to mode I, II and total crack driving force. Present model(Willenborg's model) for crack growth retardation prediction was modified to take into consideration the effects of crack tip branching When we predicted retardation with modified model. it was confirmed that predicted and experimental results coincided with well each other.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.23-31
• /
• 2016

자유 라디칼을 이용한 RAFT 중합은 성장하는 고분자 반응을 제어할 수 있는 특성이 있어 주목 받고 있는 고분자 합성방법 중 하나이다. 이 반응의 기작은 agent라 불리는 분자를 주축으로 삼아 단량체들을 단계적으로 성장하는 가역적 방법으로 원하지 않는 종결반응으로부터 고분자 라디칼을 보호하는 역할을 수행한다. 보호의 근본적인 원인은 중간체 상태에서의 안정화 정도와 관련이 있으나 안정해진 만큼 반응속도가 느려지는 지연효과가 발생한다. 지연효과를 유도하는 원인은 많은 논란이 있었으며 그 중 하나로 agent에 존재하는 Z 치환기의 영향을 원인으로 지목하고 있다. 본 연구는 Z 치환기의 변화에 따른 안정화 정도를 파악하기 위하여 RAFT agent로 주로 이용하는 것 중 두 개의 황이 있는 dithioester와 xanthate를 WxMacMolplt 7.3.2를 이용하여 propagation 초기 단계를 구현한 후 GAMESS2 프로그램을 이용하여 양자화학적 계산을 수행하였다. 계산결과 안정화 에너지와 경계 궤도함수에서는 phenyl기가 있을 때 공명효과에 의하여 안정화가 이루어졌으며 또한 propyl benzyl에서도 늘어난 알킬 사슬의 donating effect로 인한 안정화 영향의 범위를 발견하였다. PES 기법을 통해 두 methyl 단량체를 움직이면서 반응하는 동안의 에너지 변화를 알아보았으며 그 결과 dithioester는 Z 치환기의 변화에 더 많이 의존한다는 것을 확인하였다. 본 연구를 종합해본 결과 phenyl을 제외한 aryl기가 있는 dithioester는 낮은 addition 퍼텐셜과 안정화 에너지를 가질 수 있을 것이고 지연효과를 줄일 수 있을 것으로 기대된다.