• Title/Summary/Keyword: 지역 경계

Search Result 1,493, Processing Time 0.031 seconds

The improvement of the SDMB service in the border adding time delay to the satellite signal (위성신호 Delay추가를 통한 위성DMB 서비스 경계지역 품질개선)

  • Min, Man-Gi
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.9 no.5
    • /
    • pp.1279-1283
    • /
    • 2008
  • Satellite Digital Multimedia Broadcasting(SDMB) needs Gap Fillers(GFs) to cover the non-service areas. However, SDMB mobile phones which are not located in GFs service area receive signals directly from the satellite because it is impossible to cover all SDMB service with GFs. Therefore, there is a border between the GFs service coverage and the satellite service coverage and it causes a time delay in signals which are from the GFs or the satellite. The time delay is the reason why SDMB service deteriorates. In this paper, I show how to reduce the deterioration of SDMB service in the border area between the GFs and the satellite adding the time delay to the satellite signal and the GFs signal. I think that this method is helpful in reducing the deterioration, especially in the early stages of SDMB service, which the GFs are not spread all over the nation yet.

Maritime Atmospheric Boundary Layer Observed By L-band Doppler radar (도플러 레이더를 이용한 해안지역의 대기경계층 분석 연구)

  • Kwon, Byung-Hyuk;Yoon, Hong-Joo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.5
    • /
    • pp.977-984
    • /
    • 2000
  • Atmospheric boundary layer over equatorial maritime continent was analyzed with Doppler radar. An L-band (1357.5 MHz) boundary layer radar (BLR) has been in continuous successful operation in Selpong, Indonesia(6.45, 106.7E), since November 1992. The performance of the BLR with respect to the observation height range and the wind measurement reliability has been examined on the basis of simultaneous meteorological observations. In the dry season (10-12 October 1993), we have found two types of strong echo structures appearing systematically in the equatorial planetary boundary layer with diurnal variations on clear days. The first type is the striking appearance of a strong echo layer ascending from below 300 m (in the morning) to above 3-5 km (in the afternoon), which is identified with a diurnal variation of the top of the mixing planetary boundary layer. As expected, it is higher in the Indonesian equatorial region than in midlatitudes. Another type is a layered echo appearing at 2-3 km heights from nighttime to morning, which seem to be coincident with humidity gaps. In the rainy season (20-21 February 1994), the height of the atmospheric mining was lower than that in the dry season.

  • PDF

DEM Extraction from LiDAR DSM of Urban Area (도시지역 LiDAR DSM으로부터 DEM추출기법 연구)

  • Choi, Yun-Woong;Cho, Gi-Sung
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.13 no.1 s.31
    • /
    • pp.19-25
    • /
    • 2005
  • Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.

  • PDF

Setting Method of Vigilance Parameter of ART2 Algorithm (ART2 알고리즘에서의 경계 변수 설정 방법)

  • Park, Seong-Yeol;Kim, Seong-Hoon;Kim', Kwang-Baek
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2009.01a
    • /
    • pp.31-34
    • /
    • 2009
  • ART2 알고리즘은 신경 회로망 모델로서 실시간 학습이 가능하여 저속 및 고속을 지원할 뿐만 아니라 지역 최소화(local minima) 문제가 발생하지 않는 장점을 갖는다. 그러나 ART2 알고리즘은 경계 변수 설정에 따라 클러스터의 수가 달라지며, 이러한 경계 변수 설정은 패턴의 분류와 인식 성능을 좌우한다. 따라서 본 논문에서는 ART2 알고리즘에서 효율적으로 경계 변수를 설정하기 위해 패턴셋 설정을 통한 경계 변수 설정 방법을 제안한다. 제안된 경계 변수 설정 방법의 성능을 평가하기 위해 숫자 및 영문 패턴을 대상으로 실험한 결과, 패턴 분류의 성능이 기존의 방식 보다 개선된 것을 확인하였다.

  • PDF

Analysis of inundation map considering sea level in coastal city and detailed flood vulnerability assessment (해수위를 고려한 연안지역 홍수피해 침수예상도 작성 및 상세홍수취약성 분석)

  • Choi, So Hyun;Kim, Young Jun;Jun, Hwan Don
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.288-288
    • /
    • 2019
  • 지구온난화로 인해 해수면이 지속적으로 상승하고 있으며, 이에 따라 연안인근 지역은 복합원인에 의한 홍수피해가 빈번히 발생하고 있다. 우리나라는 반도 지형으로 해수면 상승에 따라 침수피해 발생 시 피해규모가 클 것으로 예상되어 이에 적극적으로 대처할 필요가 있다. 복합원인에 의한 침수예상도는 해수위를 고려한 내외수 침수피해 발생 시 침수의 범위 및 양상을 예측한다. 먼저 침수발생 시 피해규모가 클 것으로 예상되는 연안인근의 도심지역을 위주로 대상지역을 선정하였으며, 침수발생 원인별 침수예상도를 작성하였다. 작성된 침수예상도를 바탕으로 상세 홍수취약성을 평가하였으며, 이를 바탕으로 주요 시설물의 위치 선정, 관거 개량의 우선순위 선정 등에 활용할 수 있다. 먼저 도상조사를 통해 침수발생 후보지역을 선정하고, 현장답사를 통해 현장 변경사항, 재해원인 및 재해발생가능성을 검토하여 대상지역으로 여수시 연등천 인근을 선정하였다. 모의 방법으로는 HEC-HMS 및 XP-SWMM 등 강우-유출 모형에 의해 침수해석을 실시하고, 하류단 경계조건의 변화에 따른 기점수위를 산정하여 해수위를 고려하였다. 하류단 경계조건으로는 대상지역의 폭풍해일에 의한 해수위 상승고를 적용하였다. 배수토구가 하천으로 연결된 경우에는 해당 하천의 홍수위 산정이 필요하며 홍수위 산정에는 HEC-RAS 모형을 사용하였다. 작성된 침수예상도를 통해 상세 홍수취약성 분석을 실시하였으며, 상세 홍수취약성 지수는 "기후변화 적응을 위한 연안도시지역별 복합원인의 홍수 취약성 평가기술 개발 및 대응방안 연구"에서 개발된 지표를 기반으로 산정하였다. 본 연구에서는 강우-유출 모형의 하류단 경계조건 변화를 통해 해수위 상승을 고려하여 연안도시 지역의 침수예상도를 작성하였으며, 침수발생 예상도를 통해 상세 홍수취약성을 분석하였다. 이는 침수발생에 따른 대피지도 개발, 주요 시설물의 계획, 침수피해 예방을 위한 구조적 대책 수립을 위한 기초자료로 활용될 수 있다.

  • PDF

An Energy-efficient Edge Detection Method for Continuous Object Tracking in Wireless Sensor Networks (무선 센서 네트워크에서의 연속적인 물체의 추적을 위한 에너지 효율적인 경계 선정 기법)

  • Jang, Sang-Wook;Hahn, Joo-Sun;Ha, Rhan
    • Journal of KIISE:Information Networking
    • /
    • v.36 no.6
    • /
    • pp.514-527
    • /
    • 2009
  • Wireless sensor networks (WSNs) can be used in various applications for military or environmental purpose. Recently, there are lots of on-going researches for detecting and tracking the spread of continuous objects or phenomena such as poisonous gas, wildfires, earthquakes, and so on. Some previous work has proposed techniques to detect edge nodes of such a continuous object based on the information of all the 1-hop neighbor nodes. In those techniques, however, a number of nodes are redundantly selected as edge nodes, and thus, the boundary of the continuous object cannot be presented accurately. In this paper, we propose a new edge detection method in which edge nodes of the continuous object are detected based on the information of the neighbor nodes obtained via the Localized Delaunay Triangulation so that a minimum number of nodes are selected as edge nodes. We also define the sensor behavior rule for tracking continuous objects energy-efficiently. Our simulation results show that the proposed edge detection method provides enhanced performance compared with previous 1-hop neighbor node based methods. On the average, the accuracy is improved by 29.95% while the number of edge nodes, the amount of communication messages and energy consumption are reduced by 54.43%, 79.36% and 72.34%, respectively. Moreover, the number of edge nodes decreases by 48.38% on the average in our field test with MICAz motes.

A New Hierarchical Representation Method for Planar Shape (평면 형상에 대한 새로운 계층적 표현 방법)

  • 허봉식;김민환
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2001.06a
    • /
    • pp.212-215
    • /
    • 2001
  • 본 논문에서는 평면 형상에 대한 새로운 계층적 표현 방법을 소개하였다. 제안한 방법에서는 근사화 과정의 근사화 오차(approximation error)를 근사화 순서와 정도를 결정하는 중요한 척도로 활용하였으며, 제안한 오차 조절 알고리즘을 통해 보다 자연스러운 근사화 표현이 가능하도록 하였다. 그리고 최소 경계 사각형(MBR: Minimum Bounding Rectangle)을 단순 확장한 최소 경계 팔각형(MBO: Minimum Bounding Octangle)을 지역화에 응용하였으며, 이는 다른 지역화 방법들과 비교하였을 때 상대적으로 더 효율적인 방법임을 확인할 수 있었다.

  • PDF

A Study for Odor Control Regulations of Gas Releasing Ports (배출구 악취 규제제도 연구)

  • 유미선;양성봉
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.193-194
    • /
    • 2001
  • 우리나라의 악취공해는 대기환경보전법상의 한 형태로 간주되고 있으며 일본의 악취방지법 제정당시의 규제기준과 유사한 점이 많다. 그리고 실질적인 악취배출의 평가는 사업장의 부지경계선상에서의 직접측정법에 의해 이루어지는 경우가 대부분이였으나, 최근에 이르러 악취 민원이 빈번히 발생되고 공업지역과 같은 배출원이 많은 지역에 있어서 부지경계선상에서의 직접관능법에 의한 악취평가로는 악취배출원을 특징짓기 어렵다는 점 때문에 배출원에 대한 직접적인 규제가 효과적이라는 인식이 늘고 있다. (중략)

  • PDF

The Specific Gene Characteristics of Chloroplast Genome in Viola (제비꽃종류에서 나타나는 엽록체 DNA 게놈의 특이 유전자 특징)

  • Ah-reum Go;Ki-Oug Yoo
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2023.04a
    • /
    • pp.19-19
    • /
    • 2023
  • 제비꽃속 34분류군의 61개체를 대상으로 엽록체 DNA 게놈 특이 유전자의 특징을 알아보고자 하였다. 61개체의 엽록체 게놈 전체 길이는 155,535~158,940 bp 로 모두 전형적인 사분할 구조였다. 지역별로는 LSC 지역이 84,826~87,250 bp, SSC 지역이 16,338~18,654 bp, 그리고 IR 지역이 26,029~27,192 bp 였다. 유전자 개수는 131개로 84개 protein coding-gene, 37개 tRNA 유전자, 8개 rRNA유전자, 그리고 2개의 유사유전자인 𝜓rps19, 𝜓ycf1으로 구성되어 있었다. LSC/IRa 경계에 위치한 rps19 유전자 길이는 279 bp로 모든 분류군에서 동일하였으며, 𝜓rps19의 길이는 다양했으나 유전자 개수에는 영향을 미치지 않았다. SSC/IRb 경계에 위치한 ycf1 유전자 길이는 약 5,600 bp 였으나, V. japonica (MZ151699) 1개체에서는 다른 종에 비해 약 1,000 bp 위치에서 발생한 점돌연변이로 인해 종결 코돈이 나타나는 특징을 보였다. 한편 13분류군의 23개체에서는 𝜓ycf1의 길이가 650 bp 정도 짧은 것을 확인하였는데, 이 종류들은 원예종인 V. tricolor (ON262802) 이외에는 모두 줄기가 없는 분류군들로 IR 지역의 확장과 SSC 지역의 수축에 의한 것으로 판단된다. ndhF는 대체로 SSC 지역에 위치하나, V. inconspicua (MZ065354), V. mongolica (MW802534, ON548135), V. yunnanfuensis (MW802541) 등 4개체에서는 IRa/SSC 경계에 위치하면서 유사유전자가 발생하였고, 그 결과 다른 제비꽃 종류에 비해 유전자 개수가 132개로 차이를 보였다. 또한, V. collina (OP271831), V. mirabilis (MH256000), V. tricolor (ON262802) 등 3분류군에서는 SSC 지역이 inversion 되어 엽록체 이성질체가 존재함을 확인하였다. 이상의 결과를 종합하면, 제비 꽃속 엽록체 게놈 61개체의 ycf1, 𝜓ycf1, ndhF, 𝜓ndhF 등은 유전자 길이와 개수 등에 차이를 보이는 것으로 나타났으며, 제비꽃속에서도 엽록체 이성질체가 존재함을 확인할 수 있었다.

  • PDF

Accuracy on the Edge Detection Using High-Resolution Satellite Image (고해상도 위성 영상을 이용한 경계검출에 대한 정확도 분석)

  • 박운용;문두열;홍순헌;윤경철
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2004.03a
    • /
    • pp.529-534
    • /
    • 2004
  • 고해상도 위성영상을 이용하여 수치지도를 제작함에 있어 가장 큰 문제점은 레스터 자료인 위성영상에서 경계검출을 통해 벡터자료의 형태로 제작하는 어려움이 있다. 본 연구에서는 경계검출을 통하여 위성영상에서 지형의 경계를 검출해내고, 이를 스크린 디지 타이징 기법을 적용하여 벡터라이징 한 후 나타난 결과를 국토지리정보원의 수치지도와 비교하여 정확도를 비교ㆍ평가하였다. 대상 범위는 대전광역시 유성구 가정동 일부지역을 IKONOS로 촬영된 공간해상도 1m의 위성영상을 사용하였다. 위성영상의 전처리는 기하보정과 정사보정을 거친 후 영상강조를 하였고, 여러 가지의 필터링을 적용하여 경계검출을 수행하였다. 경계검출 방법 중에 하나인 Sobel 연산자를 적용한 후 축척 1:5,000 수치지도와의 중첩을 통하여 표준편차(Root Mean Square Error : RMSE)를 산출하여 비교ㆍ분석하였다. 그리고 스크린 디지타이징 기법을 적용하여 추출한 벡터자료를 건물, 도로 및 임야로 분류하여 수치지도와 중첩하여 정확도를 분석하였다. 그 결과 건물과 도로의 경우에는 공공측량 작업규정에서 정하고 있는 축척 1:5,000의 평면위치 허용오차 기준을 만족하고 있지만, 임야의 경우는 축척 1:10,000 이상의 허용오차기준에 만족되고 있음을 알 수 있었다.

  • PDF