• Journal of Korea Water Resources Association
• /
• v.51 no.4
• /
• pp.301-311
• /
• 2018

Recently, the flood inundation caused by heavy rainfall in urban area is increasing due to global warming. The variability of climate change is described in the IPCC 5th report (2014). The precipitation pattern and hydrological system is varied by climate change. Since the heavy rainfall surpassed the design capacity of the pipeline, it caused great damage in metropolitan cities such as Seoul and Busan. Inundation in urban area is primarily caused by insufficient sewer capacity and surplus overflow of river. Inundation in urban area with concentrated population is more dangerous than rural and mountains areas, because it is accompanied by human casualties as well as socio-economic damage to recover destruction of roads, brides and underground spaces. In addition, various factors such as an increase in impervious area, a short time of concentration to outlet, and a shortage of sewer capacity's lack increase flooding damage. In this study, flood inundation analysis was conducted for vulnerable areas using XP-SWMM. Also, three structural flood prevention measures such as drainage pipeline construction, detention reservoir construction, and flood pumping station construction are applied as flood damage prevention alternatives. The flood data for each alternative were extracted by dividing the basin by grid. The Spatial Compromise Programming are applied using flood assessment criteria, such as maximum inundation depth, inundation time, and construction cost. The purpose of this study is to reflect the preference of alternatives according to geographical condition even in the same watershed and to select flood defense alternative considering regional characteristics.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.375-375
• /
• 2018

세계 수자원 시장은 연평균 6.5%씩 증가하고 있으며, 2025년 기준 1,038조원까지 급성장할 것으로 전문가들은 예상하고 있으나, 기후변화의 가속화로 인해 가뭄 및 홍수피해가 증가하여 수자원 관리가 더욱 어려워져지고 있다. 급속도로 변화는 환경에 대비하기 위해 국내에서는 수자원 및 기후변화에 대한 다양한 연구가 진행되고 있으나, 해외사업 진출 시에는 수자원 기초자료 수집에 대한 어려움을 겪고 있다. 이를 해결하기 위해 글로벌 수문기상자료 제공과 함께 GIS정보, 댐 및 저수지 관련 자료, 인문사회 자료, 물관련 통계자료, 물관련 재해자료 등을 웹으로 제공하는 글로벌 수자원 정보 시스템(GWB, Global World Bank)을 개발하고자 한다. 본 연구에서는 시스템의 통합 DB를 구축하고 관리방안을 도출하기 위해 수집된 메타데이터 속성 및 데이터구조를 파악하고, 세부항목별 자료 포맷을 분석 후 GIS기반 관측소 정보와 자료를 매칭하여 최종적으로 시스템 컨텐츠별로 DB를 맵핑하였다. 강수량과 기상자료는 33개국의 관측소 6,531개소의 일/월/연단위 관측자료와 10,977격자의 격자분석자료를 구축하였다. 수문자료는 33개국의 수문관측소 2,242개의 월/연단위 유량관측자료와 10,977격자의 월/연단위 직접유출, 기저유출, 잠재증발산의 격자분석자료를 구축하였다. 그리고, 수집된 강우와 기상자료는 기계 오작동, 자료 전송 오류 등으로 인한 결측치 및 이상치에 대해 자료품질분석을 통해 오자료에 대한 보정을 진행하였다. 해당자료는 MySQL를 활용하여 DB를 구축하였으며, GIS정보는 GeoServer를 활용하여 운영서버에 구축된 정보를 최종적으로 사용자에게 Web Browser로 표출하였다. 해당 시스템은 추후 전지구 수자원관련 정보를 제공하여 해외사업지역의 댐이나 보 등의 구조물 설계, 수자원산업의 해외 진출시 데이터 수집의 한계점 및 시간단축을 해결할 수 있어 수자원 분야에 기여 할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.924-928
• /
• 2009

국내의 다목적댐 저수지는 물이 흐르는 하천에 용수공급, 홍수조절 및 수력발전을 위해 만든 구조물로 형성된 저류상태를 의미한다. 이러한 수체의 유동에 영향을 미치는 가장 중요한 요소로는 유입수와 저수지에서 하천으로 방류되는 방류수이므로 본 연구에서는 유입수와 방류수에 의한 수체의 유동만을 고려하였다. 대상지는 용담댐 유역중 취수탑이 있는 지점으로 길이는 약 1,250m이고 폭은 평균 375m 정도의 크기를 갖고 있는 지형이다. 대상 지역에서 저수지 수체의 흐름특성을 평가하기 위해 SMS-RMA2 모형을 적용하였으며 용담댐 저수지 구역에 대한 1m 간격의 등고선을 가지고 대상지역에 대하여 격자를 구성하였다. 격자 크기는 평균 길이 방향으로 43m, 폭 방향으로 15m 크기로 구성하였으며 유속이 상대적으로 빠른 취수탑 부근은 좀더 세밀하게 구성하였다. 4년간 수문자료를 분석하여 이 지역의 흐름을 년중 크게 3가지로 구분하였다. 수체거동이 급변하는 여름 강우기 후에 저수지에 물이 풍부한 경우의 흐름, 봄철 저수지 물이 풍부하지 않은 상태에서 주자천으로 부터의 유입은 최하인 상태의 경우 그리고 강우기에 짧은 기간 나타나는 주자천 위주 흐름의 경우로 구분하여 모의하였다. 각각의 경우 전체적인 흐름장은 확연히 다르게 나타났으며 이런 결과로 볼 때 수체의 흐름은 상하류의 유입량 변화에 따라 항상 흐름은 변화하는 것으로 평가되었으나, 저수지 수체의 흐름 속도는 모두 0.05$^{\sim}$1.5cm/sec 정도로 모의된 것은 수체적 대비 방류량이 적어서 나타나는 현상으로 평가되었다.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.91-106
• /
• 2003

XRD results on annealing studies of Na-feldspars (Amelia albite) show rapid changes in the lattice parameters of the $1073^{\circ}C$-heated samples owing to disordering of Al and Si as well as lattice distortions upon quenching of the heated specimens. While a low albite transformed to a high albite by 7-days annealing at $1073^{\circ}C$, it remains as an early intermediate albite even by 140-days annealing at $924^{\circ}C$ due to the slower Al-Si disordering rate. From the heated samples tweed structures of $100∼200\AA$ were typically observed by TEM, which showed different ways of development between the $1073^{\circ}C$ -heated one and the $923 ^{\circ}C$ -heated one. The former locally trans-farmed to rnicrostructures similar to albite twin, while the latter transformed to domain structures containing albite twin plane in the wider area. The origin of tweed structures is suggested to be formation of incipient twins (albite twin and pericline twin) to reduce the lattice instability which is increased by disordering of Al and Si as well as quenching.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.2
• /
• pp.87-94
• /
• 1999

This study is providing Modified DRASTIC Model to which lineament density and land use are added as additional factors using geographic infomation system(GIS). and then to evaluate groundwater contamination potential of Pyungtek-Gun area in Kyunggi-Do. In this study. the reason for using additional factors is because. in case of lineament density. when we consider that most of aquifer is bedrock aquifer in hydrogeologic environment of the Korea, lineament is very important to flow of groundwater and contamination material. and because land use can reflect indirectly impact of point or non_point source in study area. For statistical analysis. vector coverage per each factor is converted to grid layer and after each correlation coefficient between factors, covariance, variance. eigenvalue and eigenvector by principal component analysis of 3 direction. are calculated. correlation between factors is analyzed. Also after correlation coefficients between general DRASTIC layer and rated lineament density layer and between general DRASTIC layer and rated land use layer are calculated. final modified DRASTIC Model is constructed by using them with each weighting. when modified DRASTIC Model was compared with general DRASTIC Model, comtamination potential in modified DRASTIC Model is fairly detailed and consequently. vulnerable area which has high contamination potential could be presented concretly.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.253-261
• /
• 2024

Olivine, a major mineral in the upper mantle with strong intrinsic elastic anisotropy, plays a crucial role in seismic anisotropy in the mantle, primarily through its lattice preferred orientation (LPO). Despite this, the influence of the microstructure of mylonitic rocks on seismic anisotropy remains inadequately understood. Notably, there is a current research gap concerning seismic anisotropy directly inferred from mylonitic peridotite massifs in Korea. In this study, we introduce the deformation microstructure and LPO of olivine in the mantle shear zone. We calculate the characteristics of seismic anisotropy based on the degree of deformation (proto-mylonite, mylonite, ultra-mylonite) and establish correlations between these characteristics. Our findings reveal that the seismic anisotropy resulting from the olivine LPO in the ultra-mylonitic rock appears to be the weakest, whereas the seismic anisotropy resulting from the olivine LPO in the proto-mylonitic rock appears to be the strongest. The results demonstrate a gradual decrease in seismic anisotropy as the fabric strength (J-index) of olivine LPO diminishes, irrespective of the specific pattern of olivine's LPO. Moreover, all samples exhibit a polarization direction of the fast S-wave aligned subparallel to the lineation. This suggests that seismic anisotropy originating from olivine in mylonitic peridotites is primarily influenced by fabric strength rather than LPO type. Considering these distinctive characteristics of seismic anisotropy is expected to facilitate comparisons and interpretations of the internal mantle structure and seismic data in the Yugu area, Gyeonggi Massif.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.113-118
• /
• 2010

Recently, 3D-reconstruction for geographic information and study of geospatial information is progressing in various fields through national policy such as R&D business and pilot project. LiDAR system has a advantage of acquisition the 3D information data easily and densely so that is used in many different fields. Considering to characterist of the point data formed with 3D, it need a high specification CPU because it requires a number of processing operation for 2D form expressed by monitor. In contrast, 2D grid structure, like DEM, has a advantage on costs because of simple structure and processing speed. Therefore, purpose of this study is to solve the problem of requirement of more storage space, when LiDAR data stored in forms of 3D is used for 3D-geographic and 3D-buliding representation. Additionally, This study reconstitutes 2D-gird data to supply the representation data of 3D-geographic and presents the storage method which is available for detailed representation applying tree-structure and reduces the storage space.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.327-336
• /
• 2014

Submerged thin walls are extreme case of submerged rectangular blocks, and could be used for many purposes in rivers or coastal zones, e.g. to tsunami. To understand flow characteristics including flow and pressure fields around a specific submerged thin wall a numerical model was applied which includes computation of hydrodynamic pressure on ${\sigma}$-coordinate. ${\sigma}$-coordinate has strong merits for simulation of subcritical flow over mild-sloped beds. On the other hand ${\sigma}$-coordinate is quite poor to treat sharp structures on the bed. There have been a few trials to incorporate dynamic pressure in ${\sigma}$-coordinate by some researchers. One of the previous approaches includes process of sloving the Poisson equation. However, the above method includes many high-order terms, and requires long cpu for simulation. Another method SOLA was developed by Hirt et al. for computation of dynamic pressure, but it was valid for straight grid system only. Previous SOLA was modified for ${\sigma}$-coordinate for the present purpose and was adopted in a model system, CST3D. Computed flow field shows reasonable behaviour including vorticity is much stronger than the upstream and downstream of the structure. The model was verified to laboratory experiments at a 2DV flume. Time-average flow vectors were measured by using one-dimensional electro-magnetic velocimeter. Computed flow field agrees well with the measured flow field within 10 % error from the speed point of view at 5 profiles. It is thought that the modified SOLA scheme is useful for ${\sigma}$-coordinate system.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.5
• /
• pp.47-63
• /
• 2021

Recently, the demand for three-dimensional (3D) underground maps from the perspective of digital twins and the demand for linkage utilization are increasing. However, the vastness of national geotechnical survey data and the uncertainty in applying geostatistical techniques pose challenges in modeling underground regional geotechnical characteristics. In this study, an optimal learning model based on multi-layer perceptron (MLP) was constructed for 3D subsurface lithological and geotechnical classification in Seoul, South Korea. First, the geotechnical layer and 3D spatial coordinates of each borehole dataset in the Seoul area were constructed as a geotechnical database according to a standardized format, and data pre-processing such as correction and normalization of missing values for machine learning was performed. An optimal fitting model was designed through hyperparameter optimization of the MLP model and model performance evaluation, such as precision and accuracy tests. Then, a 3D grid network locally assigning geotechnical layer classification was constructed by applying an MLP-based bet-fitting model for each unit lattice. The constructed 3D geotechnical layer map was evaluated by comparing the results of a geostatistical interpolation technique and the topsoil properties of the geological map.

• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.21-30
• /
• 1998

The purpose of this study is to assess contaminant transfer and environmental impacts to the surroundings by inadequate control of USTs. Several methodologies can be used to approach for the site assessment depending on the appearance of contaminants on the site and their types. In this case study, randomized and/or triangle matrix techniques were used. As a result, the composition of materials in tank station were appeared in several state. From 1 to 1.5m depth, the soil was composed of reclaimed soils. And 1.8-3.5m depth, silty sand was appeared and about 4m, weathered soil was appeared. Based on the preliminary and actual site investigation by DPT methodologies on the width and depth of the site with analysis of BTEX and TPH, the contamination was found in this tank station and already distributed near areas. Finally, it was found that the hydroflow differences during the season affects the area and depth of contamination.