• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.343-363
• /
• 2023

Sulawesi island, as a global producer of nickel resources, is leading the rapid growth of nickel industry of Indonesia. Nickel laterite deposits in Sulawesi was formed by lateritization of the world-scale East Sulawesi Ophiolite (ESO) under the active tectonic setting and tropical rainforest climate. In this paper, exploration cases for nickel laterite deposits in five regions of Sulawesi are reported. Regional characteristics on nickel laterite deposits in Sulawesi are understood based on various exploration activities such as outcrop, trench and pit survey, petrological observation, geochemical analysis, and interpretation of drilling data, etc.. In the northeastern part of 'Southeast-Arm', which is a strategic location for nickel industry of Indonesia, ESO is extensively exposed to the surface. In the Morombo and Morowali regions, typical high-grade saprolite-type orebodies with a thickness of 10 to 20 m occur. The cases showed that topographic relief tends to regulate Ni-grade distribution and orebody thickness, and that high grade intervals tend to occur in places where joints and garnierite veins are dense. In the Tinanggea and South Palangga regions in the southern part of the Southeast-Arm, overburden composed of Neogene to Quaternary deposits is a major factor affecting the preservation and profitability of nickel laterite deposits. Despite the overburden, high-grade saprolite-type orebodies composed of Ni-bearing serpentine with garnierite veins occur in a thickness of around 10 m to secure economic feasibility. In contrast, in the Ampana region in the northern part of 'East-Arm', low-grade nickel laterite deposits with immature laterite profile was identified, which is thought to be the result of active denudation due to tectonic uplift. Exploration cases in this paper will help to understand characteristics and controlling factors on nickel laterite deposits in Sulawesi, Indonesia.

• Korean Journal of Remote Sensing
• /
• v.39 no.2
• /
• pp.247-253
• /
• 2023

As climate change problem has recently become serious, studies are being conducted to identify carbon dioxide (CO₂) emission dynamics based on satellite data to reduce emissions. It is also very important to analyze spatial patterns by estimating and mapping CO₂ emissions dynamic. Therefore, in this study, CO₂ emissions in the Korean Peninsula from 2013 to 2020 were estimated and mapped. To spatially estimate and map emissions, we use the enhanced vegetation index adjusted nighttime light index, an index that combines nighttime light (NTL) and vegetation index, to map both areas where NTL is observed and areas where NTL is not observed. In order to spatially estimate and map CO₂ emissions, the total annual emissions of the Korean Peninsula were calculated, resulting in an increase of 11% from 2013 to 2017 and a decrease of 13% from 2017 to 2020. As a result of the mapping, it was confirmed that the spatial pattern of CO₂ emissions in the Korean Peninsula were concentrated in urban areas. After being divided into 17 regions, which included the downtown area, the metropolitan area accounted for roughly 40% of CO₂ emissions in the Korean Peninsula. The region that exhibited the most significant change from 2013 to 2020 was Sejong City, showing a 96% increase.

• Journal of the Korean Geographical Society
• /
• v.43 no.5
• /
• pp.681-700
• /
• 2008

In this study, the spatial and temporal patterns of changes in means and extreme events of temperature and precipitation across the Republic of Korea over the last 35 years (1973-2007) are examined. Over the study period, meteorological winter (December-February) mean minimum (maximum) temperature has increased by $+0.54^{\circ}C$/decade ($+0.6^{\circ}C$/decade), while there have been no significant changes in meteorological summer (June-August) mean temperatures. According to analyses of upper or lower $10^{th}$ percentile-based extreme temperature indices, the annual frequency of cool nights (days) has decreased by -9.2 days/decade (-3.3 days/decade), while the annual frequency of warm nights (days) has increased by +4.9 days/decade (+6.8 days/decade). In contrast, the increase rates of summer warm nights (+8.0 days/$^{\circ}C$) and days (+6.6 days/$^{\circ}C$) relative to changes in summer means minimum and maximum temperatures means are greater than the decreasing rates of winter nights (-5.2 days/$^{\circ}C$) and days (-4.3 days/$^{\circ}C$) relative to changes in winter temperatures. These results demonstrate that seasonal and diurnal asymmetric changes in extreme temperature events have occurred. Moreover, annual total precipitation has increased by 85.5 mm/decade particularly in July and August, which led to the shift of a bimodal behavior of summer precipitation into a multi-modal structure. These changes have resulted from the intensification of heavy rainfall events above 40mm in recent decades, and spatially the statistically-significant increases in these heavy rainfall events are observed around the Taebaek mountain region.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.218-233
• /
• 2022

The long-term (1986~2020) predictability of the number of days of heat and cold damages for each growth stage of soybean is evaluated using the daily maximum and minimum temperature (Tmax and Tmin) data produced by Pusan National University Coupled General Circulation Model (PNU CGCM)-Weather Research and Forecasting (WRF). The Predictability evaluation methods for the number of days of damages are Normalized Standard Deviations (NSD), Root Mean Square Error (RMSE), Hit Rate (HR), and Heidke Skill Score (HSS). First, we verified the simulation performance of the Tmax and Tmin, which are the variables that define the heat and cold damages of soybean. As a result, although there are some differences depending on the month starting with initial conditions from January (01RUN) to May (05RUN), the result after a systematic bias correction by the Variance Scaling method is similar to the observation compared to the bias-uncorrected one. The simulation performance for correction Tmax and Tmin from March to October is overall high in the results (ENS) averaged by applying the Simple Composite Method (SCM) from 01RUN to 05RUN. In addition, the model well simulates the regional patterns and characteristics of the number of days of heat and cold damages by according to the growth stages of soybean, compared with observations. In ENS, HR and HSS for heat damage (cold damage) of soybean have ranged from 0.45~0.75, 0.02~0.10 (0.49~0.76, -0.04~0.11) during each growth stage. In conclusion, 01RUN~05RUN and ENS of PNU CGCM-WRF Chain have the reasonable performance to predict heat and cold damages for each growth stage of soybean in South Korea.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.389-401
• /
• 2023

Climate, weather, insolation (solar radiation), and solar energy in major cities of Tajikistan were investigated prior to construction of infrastructure for the Dushanbe Solar Station. In Dushanbe city there was a 70% probability of sunny days from May 16 to October 23, a period of 5.2 months. August had the most sunny days of in the year, with 99% probability of a sunny, the cloudiest month was February with a 41% chance of being sunny. In major cities of the Sughd and Gorno-Badakhshan states, the average number of cloudy days per month was ~3.3, with Dzhauz having 53 day and Fedchnko Glacier 79 days. For the 18 major cities of Tajikistan, the average annual total solar radiation was 2,429 W/m², and the average monthly solar radiation was 202 W/m². The city with the lowest annual total and monthly average solar radiation was Shartuz in Sughd state, with values ~2.7% less than the national average. The cities with the highest annual total and monthly average solar radiation were Khorog and Jirgatol in Gorno-Badakhshan state, with values ~10% above the national average. The daily average incident shortwave solar energy in the cities Dushanbe, Karakul, and Jirgatol was ~7.8 kWh per 2.4 m² during summer (May-August), and 2.7 kWh during winter (November-February), or ~35% that of summer.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.281-302
• /
• 2023

Carbon is not only an essential element for life but also a key player in climate change. The radiocarbon (¹⁴C) analysis using accelerator mass spectrometry (AMS) is a powerful tool not only to understand the carbon cycle but also to track pollutants derived from fossil carbon, which have a distinct radiocarbon isotope ratio (Δ¹⁴C). Many studies have reported Δ¹⁴C of carbon compounds in streams, rivers, rain, snow, throughfall, fine particulate matter (PM_2.5), and wastewater treatment plant effluents in South Korea, which are reviewed in this manuscript. In summary, (1) stream and river carbon in South Korea are largely derived from the chemical weathering of soils and rocks, and organic compounds in plants and soils, strongly influenced by precipitation, wastewater treatment effluents, agricultural land use, soil water, and groundwater. (2) Unprecedentedly high Δ¹⁴C of precipitation during winter has been reported, which can directly and indirectly influence stream and river carbon. Although we cannot exclude the possibility of local contamination sources of high Δ¹⁴C, the results suggest that stream dissolved organic carbon could be older than previously thought, warranting future studies. (3) The ¹⁴C analysis has also been applied to quantify the sources of forest throughfall and PM_2.5, providing new insights. The ¹⁴C data on a variety of ecosystems will be valuable not only to track the pollutants derived from fossil carbon but also to improve our understanding of climate change and provide solutions.

• Journal of Korea Water Resources Association
• /
• v.56 no.11
• /
• pp.775-784
• /
• 2023

With the increasing trend of extreme rainfall that exceeds the design frequency of man-made structures due to extreme weather, it is necessary to review the safety of agricultural reservoirs designed in the past. However, there are no local government-managed reservoirs (13,685) that can be discharged in an emergency, except for reservoirs over a certain size under the jurisdiction of the Korea Rural Affairs Corporation. In this case, it is important to quickly deploy a mobile siphon to the site for preliminary discharge, and this study evaluated the applicability of a mobile siphon with a diameter of 200 mm, a minimum water level difference of 6 m, 420 (m²/h), and 10,000 (m²/day), which can perform both preliminary and emergency discharge functions, to the Yugum Reservoir in Gyeongju City. The test bed, Yugum Reservoir, is a facility that was completed in 1945 and has been in use for about 78 years. According to the hydrological stability analysis, the lowest height of the current dam crest section is 27.15 (EL.m), which is 0.29m lower than the reviewed flood level of 27.44 (EL.m), indicating that there is a possibility of lunar flow through the embankment, and the headroom is insufficient by 1.72 m, so it was reviewed as not securing hydrological safety. The water level-volume curve was arbitrarily derived because it was difficult to clearly establish the water level-flow relationship curve of the reservoir since the water level-flow measurement was not carried out regularly, and based on the derived curve, the algorithm for operating small and medium-sized old reservoirs was developed to consider the pre-discharge time, the amount of spillway discharge, and to predict the reservoir lunar flow time according to the flood volume by frequency, thereby securing evacuation time in advance and reducing the risk of collapse. Based on one row of 200 mm diameter mobile siphons, the optimal pre-discharge time to secure evacuation time (about 1 hour) while maintaining 80% of the upper limit water level (about 30,000 m²) during a 30-year flood was analyzed to be 12 hours earlier. If the pre-discharge technology utilizing siphons for small and medium-sized old reservoirs and the algorithm for reservoir operation are implemented in advance in case of abnormal weather and the decision-making of managers is supported, it is possible to secure the safety of residents in the risk area of reservoir collapse, resolve the anxiety of residents through the establishment of a support system for evacuating residents, and reduce risk factors by providing risk avoidance measures in the event of a reservoir risk situation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.128-140
• /
• 2021

This study applied the theory of Landscape Ecology to representative resources of Jeju Olle-gil, which is a representative subject of walking tourism, to identify ecological characteristics and to establish a technique for landscape ecological analysis of Olle-gil resources. Jeju Olle Trail type based on the biotope type, major land use, vegetation status around Olle Trail and roads were divided into 12 types. Based on the type of ecological tourism resource classification, the Jeju Olle-gil walking tourism resource classification was divided into seven types of natural resources and seven types of humanities resources, and each resource was characterized by Geotope, Biotope, and Anthropopope, just like the landscape ecology system. Geotope resources are strong in landscape characteristics such as coast and beach, rocks, bedrocks, waterfalls, geology and Jusangjeolli Cliff, Oreum and craters, water resources, and landscape viewpoints. The Biotope resources showed strong ecological characteristics due to large tree and protected tree, Gotjawal, forest road and vegetation communities, biological habitat, vegetation landscape view point. Antropotope include Culture of Jeju Haenyeo and traditional culture, potting and lighthouses, experience facilities, temples and churches, military and beacon facilities, other historical and cultural facilities, and cultural landscape views. Jeju Olle Trail The representative resources for each type of Jeju Olle Trail are coastal, Oreum, Gotjawal, field and Stonewall Fencing farming land, Jeju Village and Stone wall of Jeju. In order to learn about the components and various functions of the resources representing the Olle Trail's ecological culture, the landscape ecological technique was interpreted. Looking at the ecological and cultural characteristics of coastal, the coast includes black basalt rocks, coastal vegetation, coastal grasslands, coastal rock vegetation, winter migratory birds and Jeju haenyeo. Oreum is a unique volcanic topography, which includes circular and oval mountain bodies, oreum vegetation, crater wetlands, the origin and legend of the name of Oreum, the legend of the name of Oreum, the culture of grazing horses, the use of military purposes, the object of folk belief, and the view from the summit. Gotjawal features rocky bumps, unique microclimate formation, Gotjawal vegetation, geographical names, the culture of charcoal being baked in the past, and bizarre shapes of trees and vines. Field walls include the structure and shape of field walls, field cultivation crops, field wall habitats, Jeju agricultural culture, and field walls. The village includes a stone wall and roof structure built from basalt, a pavilion at the entrance of the village, a yard and garden inside the house, a view of the lives of local people, and an alleyway view. These resources have slowly changed with the long lives of humans, and are now unique to Jeju Island. By providing contents specialized for each type of Olle Trail, tourists who walk on Olle will be able to experience the Olle Trail in depth as they learn the story of the resources, and will be able to increase the sustainable use and satisfaction of Jeju Olle Trail users.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.3
• /
• pp.21-36
• /
• 2023

As a solution to environmental issues, such as climate change response, the carbon neutrality strategy, urban heat islands, fine dust, and biodiversity enhancement, the value of urban green spaces and trees are becoming important, and various studies dealing with the effects of trees for environmental improvement are being conducted. This study comprehensively considers the preceding studies on planting tree species, planting structure, planting density, and planting base to propose a direction for the planting renewal of green areas in urban parks and applies the findings to a renewal plan to improve the urban environment through landscaping trees. A field survey was conducted on the planting status of Seoul Children's Grand Park, a large-scale neighborhood park in Seoul, and based on the survey data, a planting function evaluation was conducted, and areas needing improvement in planting function were identified. The planting function evaluation was carried out considering the park function setting, planting concept according to spatial function, and planting status. As a result of the study, the direction of planting renewal according to functional change was derived for each stage of planting function evaluation. Increasing the green area ratio is a priority in setting up park functions, but user convenience should also be considered. As a concept of planting, visual landscape planting involves planting species with beautiful tree shapes, high carbon absorption, and fine dust reduction effects. Ecological landscape planting should create a multi-layered planting site on a slope. Buffer planting should be created as multi-layered forests to improve carbon absorption and fine dust reduction effects. Green planting should consist of broad-leaved trees and herbaceous layers and aim for the natural planting of herbaceous species. For plant species, species with high urban environment improvement effects, local native species, and wild bird preferred species should be selected. As for the planting structure, landscape planting sites and green planting sites should be composed of trees, shrubs, and trees and herbaceous layers that emphasize ecology or require multi-layered buffer functions. A higher standard is applied based on the planting interval for planting density. Installing a rainwater recycling facility and using soil loam for the planting base improves performance. The results of this study are meaningful in that they can be applied to derive areas needing functional improvement by performing planting function evaluation when planning planting renewal of aging urban parks and can suggest renewal directions that reflect the paradigm of functional change of created green areas.

• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.437-449
• /
• 2023

This study measured PM₁₀ concentrations and wind speeds in buffer green spaces and neighborhood parks located along the road, and compared them with roadside measurementresults to understand the effect of mitigating PM₁₀ concentrations by type of green space and the influence of wind speeds on it. As a result of the analysis, the effect of mitigating PM₁₀ concentration was different depending on the type of roadside green space, and an increase in wind speed had a significant effect on reducing PM₁₀ concentration. In buffer green areas with high planting density, wind speed was low and PM₁₀ stagnated inside, resulting in the highest concentration. On the other hand, green areas in neighborhood parks with relatively low planting density had high wind speeds and the lowest PM₁₀ concentration. The non-green area within the neighborhood park recorded the highest wind speed, which was advantageous for the spread of PM₁₀, but the concentration was higherthan that of the green area. Therefore, in orderto reduce PM₁₀ concentration in roadside green space, it is necessary to create green space with good ventilation, and the combined effect of green space and wind speed seems to be more advantageous in reducing PM₁₀ concentration. Green spaces capture and remove PM inside, contributing to reducing the concentration of PM outside. In order to manage PM in the entire city and on roads, it is necessary to increase planting density and leaf area in roadside green spaces, such as buffer green spaces, so that PM can be removed within the green spaces. However, in green spaces such as neighborhood parks that are actively used by city residents, in orderto minimize damage to users due to PM, it is desirable to create green spaces with a structure that allows PM to spread to the outside rather than stagnate inside.