• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.603-611
• /
• 2011

In order to enhance cutting efficiency of reed culms, we had assessed diverse methodology in cutting and applied better conditions among them into three vigorous eco-types of common reed. From the results, differences in a eco-type, a sampling area in reed population and substrata affected the shoot emergence slightly. On the other hand, differences in a type of burying culms and a burying part among whole culm affected shoot emergence strongly. Our results suggest that not only methodological condition but also appropriate kind of eco-types must be considered in using reed culms for better cutting. In addition that, sampling timing according to the geological and climatic condition of certain area should be considered for better cutting efficiency as well. We also recommend that the sampling area such as expanding area in a population, burying a middle part of the culm, substratum such as well-ventilated sand and vertical burying method for better cutting efficiency. Lastly, for more enhancement of cutting efficiency of reed culms, potential damages by blight and harmful insects such like aphids should be concerned very carefully.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1157-1168
• /
• 2012

In this study, we assess changes in water quality trends over time based on certain control measurements in order to identify and analyze the cause of the trend in water quality. The current water pollution in the Nakdong River was analyzed, as it suggests that the significant changes in water quality have occurred in between 2006 and 2010. Based on monthly average data, we have examined for trends of the Nakdong River watershed in water temperature, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP). Moreover, we have investigated seasonal variation of water quality of sites within the Nakdong River Basin by implementing further analyses such as, Correlation Coefficient, Regression Analysis, Hierarchical Clustering Method, and Time Series Analysis on SPSS. Geology and topography of the watershed, controlled by various conditions such as, climate, vegetation, topography, soil, and rain medium, have been affected by the non-homogeneity. Our study suggests that such variables could possibly cause eutrophication problems in the river. One possible way to overcome this particular problem is to lay up a ship on the river by increasing the nasal flow measurement of the Nakdong River during rainy season. Moreover, the water management requires arranging the measurement of the flow in order to secure the river while the numerous construction projects need to be continuously observed. However, the water is not flowing tributary of the reason for the timing to be flowing in a natural state of river water and industrial water intake because agriculture. Therefore, ongoing research is needed in addition to configuration of all observations.

• Journal of the Korean Institute of Gas
• /
• v.22 no.2
• /
• pp.90-96
• /
• 2018

Design techniques for minimizing the damage caused by leakage of $H_2S$ gas, contained in natural gas and petroleum, have been widely studied abroad in chemical plants that purify and process natural gas and petroleum. However, there is no domestic engineering practice and regulation of $H_2S$. In accordance with the circumstances, this study proposes the quantitative criteria of process equipment to install $H_2S$ toxic gas detector as 500 ppm and explains the valid basis. The $H_2S$ gas dispersion radius up to IDLH 100 ppm is calculated by ALOHA under previous $H_2S$ gas leak accident scenario. The weather conditions of modeling include the conditions of Ulsan, Yeosu and Daesan, the three major petrochemical complexes in Korea. The long radius up to 100 ppm was derived in order of Ulsan, Daesan, Yeosu. For emergency safety the dispersion radius up to 100 ppm of the $H_2S$ gas obtained in this study should be extended to apply the additional $H_2S$ toxic gas detector, and local climate conditions should be considered.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.72-79
• /
• 2010

The significant of continuous welded rail (CWR) management is growing because KORAIL has the plan to convert the whole of conventional railway lines into CWRs through continuous activities since constructed the CWR track with 1.8km in Gyeongbu line in 1966. The CWR recently is needed a efficient management method because it is difficult to manage the CWR by the poor of technic and equipment, limited maintain labor force and shorted the maintain work time of CWR caused by industrialization, greenhouse effect and global warming In this point, The 70ton Tenser's which is using in the rail site has been analysised with no extra tenser's capacity in case of the under low temperature and exceed the length of 1km as a result of reviewing the CWR-related rules and standards, a series of records of safety accidents, operation obstacles, and the situation of broken rails published by KORAIL, existing rail temperature measurements, and CWR researches. Therefore avoid the excessive plan of the first set-up section, choice the proper time in the normal temperature that is possible to weld the rail, turning the difference of rail temperature and Installation temperature down is desirable.

• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.61-67
• /
• 1996

Environmental Impact Assessment (EIA) in Korea has worked toward environmental conservation and decision making since the Environmental Impact Statement of 1981. In order to implement the EIA process effectively, we have developed a system for and various methods of EIA. Among these methods, the Geographic Information System (GIS), which was introduced recently in Korea, can be used to integrate geographic and attribute data effectively. So GIS begins to increase the necessity of the application in EIA process. This study includes the integration method of the GIS and air dispersion model on the odor impact assessment of $NH_3$ emission in landfill sites. First, it computes surface values by grids using the Digital Elevation Model (DEM). Second, it presents predicted data considering topography and climate by grids. Third, it shows the overlaying analysis of the administrative map including population and odor predictive data. The results could systematically analyze impact areas, and assess residential impact by alternatives. Integration analysis of the air predictive model and GIS as a residential area assessment can support negotiations of public and proponent in EIA.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.295-305
• /
• 2010

Although the rubble mound breakwaters in Korea have been damaged by typhoons almost every year, quantification of erosion of armor block have seldomly been made. In this paper, the damage of armor units is standardized by the relative damage. In the case where the number of damaged units is reported, it is divided by the total number of units to calculate the relative damage. In the case where the rehabilitation cost is reported, the relative damage is calculated by using its relationship with the present value of the past rehabilitation cost. The relative damage is shown to have strong correlations with the typhoon parameters such as nearest central air pressure and maximum wind speed at each site. On the other hand, the existing numerical methods for calculating the cumulative damage are compared with hydraulic model tests. The method of Melby and Kobayashi (1998) is shown to give a reasonable result, and it is used to calculate the relative damage, which is compared with the measured damage. A good agreement is shown for the East Breakwater of Yeosu Harbor, while poor agreement is shown for other breakwaters. The poor agreement may be because waves of larger height than the design height occurred due to strong typhoons associated with climate change so that the relative damage increased during the last several decades.

• Journal of the Korean association of regional geographers
• /
• v.16 no.4
• /
• pp.339-354
• /
• 2010

In this study, diurnal and intra-seasonal variations of summertime temperature lapse rate (TLR) by synoptic weather conditions in a mountainous basin are examined based on hourly temperature data observed in 2009 summer at an Automatic Weather Station (AWS) network deployed in Haean basin (called Punch Bowl), Yanggu in the Republic of Korea. Summertime average TLR between the top and bottom of the basin is $-0.53^{\circ}C$/100m. Due to its diurnal variations, TLR shows the lowest by $-0.25^{\circ}C$/100m at 6AM, while it maximizes up to $-0.85^{\circ}C$/100m between 4PM~5PM. Comparisons of daily average TLRs by synoptic weather patterns reveal that the magnitude of TLRs is greatest in the order of rainy days ($-0.63^{\circ}C$/100m), heavy rainfall days ($-0.53^{\circ}C$/100m), partly cloudy days ($-0.47^{\circ}C$/100m), and sunny days ($-0.39^{\circ}C$/100m). At dawn on sunny days in summer, strong cooling pools accompanying temperature inversion layers are formed within the basin, while on heavy rainfall days, warming pools are observed due to relatively low TLRs associated with the reduction of surface radiation cooling by clouds.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.2
• /
• pp.68-78
• /
• 2020

Crop models have been used to predict vegetable crop yield, which would have a considerable economic impact on consumers as well as producers. A small number of models have been developed to estimate growth and yield of vegetables due to limited availability of growth observation data in high-quality. In this study, we aimed to analyze the protocols designed for collection of the observation data for major vegetable crops including cabbage, radish, garlic, onion and pepper. We also designed the protocols suitable for development and verification of a vegetable crop growth model. In particular, different measures were proposed to improve the existing protocol used by Statistics Korea (KOSTAT) and Rural Development Administration (RDA), which would enhance reliability of parameter estimation for the crop model. It would be advantageous to select sampling sites in areas where reliable weather observation data can be obtained because crop models quantify the response of crop growth to given weather conditions. It is recommended to choose multiple sampling sites where climate conditions would differ. It is crucial to collect time series data for comparison between observed and simulated crop growth and yield. A crop model can be developed to predict actual yield rather than attainable yield using data for crop damage caused by diseases and pests as well as weather anomalies. A bigdata platform where the observation data are to be shared would facilitate the development of crop models for vegetable crops.

• Korean Journal of Environmental Biology
• /
• v.39 no.3
• /
• pp.266-272
• /
• 2021

The aboveground biomass (AGB) was estimated in mixed dipterocarp forests (MDF), peat swamp forests (PSF), and heath forests (HF) in Brunei Darussalam. A total of 81 (20 m×20 m) plots were established for MDF, PSF, and HF in three regions. The diameter at breast height(DBH) of all live trees (DBH≥10 cm) was measured within the plots. The AGB was calculated using an allometric equation with the measured DBH. The AGB(Mg ha^-1) for MDF, PSF, and HF was 603.3±159.9, 305.9±23.4, and 284.3±19.3, respectively, and was significantly different among the forest types (p<0.05). The greater AGB in MDF than those in PSF and HF was due to the presence of emergent trees in MDF. The results showed that the number of emergent trees varied by forest type. Consequently, the appearance of the emergent trees could be one of the main factors affecting AGB in Southeast Asia's tropical rain forests.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.567-575
• /
• 2021

Residents in Dangjin, South Chungcheong Province, in which large-scale emissions facilities such as coal-fired power plants and steel mills are concentrated, are very much concerned about their health despite the local government's aggressive efforts to improve air quality and reduce greenhouse gases. To understand the impact of coal-fired power plants and external factors on local air pollution, the origins of local pollutants were investigated using stable carbon isotopes that are generally used as tracers of the provenance of fine or ultrafine dust. The origins of the pollutants were analyzed with the data library, built using the seasonally measured data for the two separate locations selected considering the distance from the coal-fired power plant and the analysis of previous studies, and with the back trajectory analysis. As a result of analyzing stable isotope ratios, the tendency of high concentration was found in the order of winter > spring > fall > summer. According to the data matching with the library, the mobile pollutants and open-air incineration had a relatively higher impact on the local air pollution. It is believed that this study, as a pilot study, should focus on securing the reliability of the study results through continuous monitoring and data accumulation.