• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.121-128
• /
• 2012

In this paper, nonlinear analysis for reinforced concrete structure for power transmission line is performed by considering the characteristics of the failure, which are depend on loading conditions and concrete material models. On the numerical evaluation for the failure behavior, the finite element analysis is applied. For the concrete material model, microplane model based on concrete damage is introduced. However, to describe the crack bridging effect of long and short fiber of steel fiber reinforced concrete (SFRC), tensile softening model is suggested and applied for SFRC. An numerical results by finite element technique are compared with the experiment results for box culvert specimen. Comparing on the experimental and analytical results, validity and reliability of numerical analysis are investigated.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.172-174
• /
• 2002

인터넷의 급속한 성장과 함께 웹을 기반으로 하는 서비스들이 더욱 확산되며 중요해지고 있다. 하지만 제한된 네트웍 환경에서 웹 트래픽의 지수적인 증가로 인해 웹 서비스의 품질 보장 문제가 대두되고 있지만 현재의 인터넷은 최선의 서비스(Best-effort service)만을 제공하며, 품질 보장형의 서비스(QoS)는 제공하지 못하고 있는 것이 현실이다. 본 논문에서는 기존에 구축되어진 웹 클러스터 모델 중에서 서버의 부하 분산을 담당하고 있는 디스패처(Dispatcher)에 대기 정렬 큐잉(Class Based Queuing)의 패킷 전송 모델을 적용하고자 한다. 제안된 모델을 통하여 클러스터 기반 웹 서비스에서 원하는 클래스의 서비스 품질을 보장할 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1191-1198
• /
• 2001

MMIC low noise amplifiers for millimeter-wave application using 0.15 $\mu$m pHEMT have been presented in this paper. The design emphasis is on active device model and EM simulation. The deficiency of conventional device models is identified. A distributed device model has been adapted to circumvent the scaling problems and, thus, to predict small signal and noise parameters accurately. Two single-ended low noise amplifier are designed using distributed active device model for Q-band(40 ∼ 44 GHz) and V-band(58 ∼65 GHz) application. The Q-band amplifier achieved a average noise figure of 2.2 dB with 18.3 dB average gain. The V-band amplifier achieved a average noise figure of 2.9 dB with 14.7 dB average gain. The design technique and model employed provides good agreement between measured and predicted results. Compared with the published data, this work also represents state-of-the-art performance in terms of gain and noise figure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.317-325
• /
• 2020

The development of a technique that can monitor the cracks, which is one of the typical types of damage, is necessary to secure the structural safety of elastically restrained cantilever-type beams with a tip mass that is used widely in infrastructure. Impedance techniques have been actively researched to detect cracks, and the cracks were estimated mainly by experimentally investigating the relationship between the crack and impedance signal. This study examined the correlation between the change in the impedance signals due to the crack, and the natural frequency obtained analytically. After updating the analysis model for the intact beam, the impedance signal was measured while gradually inflicting cracks in the cantilever-type beam, and the damage index was obtained. The results were compared with the natural frequencies calculated from the updated analysis model to investigate the correlation. A close correlation was observed between the experimentally obtained impedance damage index, and the analytically calculated natural frequency. Using this correlation, the structural characteristics could be evaluated more accurately from the damage estimation results, and the behavior of the structure could be predicted effectively using the analysis model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.641-641
• /
• 2015

수자원 관리의 새로운 패러다임으로 스마트워터그리드가 이슈화되고 있다. 스마트워터그리드는 현재 직면해 있는 물 문제를 ICT기술을 활용하여 효율적으로 관리 및 운영할 수 있는 기술이다. 가뭄과 홍수 등을 대응하기 위한 분산형 수자원, 그리고 수량과 수질등의 통합 관리를 지향하는 물관리 패러다임과 ICT와 물산업을 융복합화하여 양방향 실시간 운영을 통한 네트워크 구성, 그리고 대규모 수원개발과 장거리 수송방식으로부터 지역단위의 부존된 수자원인 다중수원을 효율적으로 활용하고, 이들 수원의 최적 블랜딩 기술 및 멀티워터루프를 이용한 수요자 중심의 물관리에 초점을 맞추고 있다. 이에 본 연구에서는 지역의 부존된 수자원을 효율적으로 관리하기 위한 운영지수를 산정함으로써 지역의 평상시 물관리 운영과 상수공급차단, 다중수원에 오염물질 유입, 가뭄발생 등 비상시 상황에 물관리가 원활히 이루어지도록 하였다. 스마트워터그리드에서 사용되는 물관리 운영지수는 비상시 지역간 플랫폼에 정상적으로 물공급이 어렵거나, 예상되어 유량 확보가 필요시 원활하게 유량 확보가 가능하도록 주변 지역간의 운영지수를 산정하여 최적의 조건을 도출하여 우선순위를 시나리오에 나타내어 사용자가 플랫폼에 물공급이 가능하도록 제시한 운영지수이다. 물관리 운영지수는 중회귀분석 기법을 이용하여 종속변수에 선형적인 영향을 미치는 유량, 수질, 이송거리, 전력비용, 경제적인 영향 등을 고려하여 종속변수의 값을 예측하고 통계적인 기법으로 유량, 수질, 이송거리, 전력비용, 경제적인 영향 등에 대한 장래추정치를 부여하여 회귀모델을 구축하여 물관리 운영지수를 산정하였다. 이를 활용하여 평상시에는 물수요 공급량을 정확히 관리하여 지역간의 수자원 불균형을 해소하고 비상시에는 상황을 대처하여 지역의 물부족 문제를 해소할 수 있을 것으로 판단된다.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.101-112
• /
• 2011

As the society has become maturer, stress has emerged as a hot social issue. In this paper, we proposed the design and implementation of a customized contents service system for relieving users' stress. In the proposed system, we compute the stress index from a user's biometics and psychology, and recommend a combination of video, sound, aroma, and lighting based on the index and user's data such as preferences, and provide the recommended contents service. We first classify symptoms of stress and then define a tool for self assessment. We classify video, sound, aroma, and lighting contents as well according to the defined symptoms. We propose 3-phase customized recommender and service model for customized contents service. We design and implement a customized contents service system for relieving users' stress. Different from existing systems, this proposed system has an individually-customized system and provides a diverse combination of different content's types.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.402-402
• /
• 2012

최근 반도체 공정 중 fluorocarbon (CxHyFz) 가스와 함께 플라즈마 밀도가 큰 유도결합형 플라즈마을 사용한 식각장비가 많이 사용되고 있다. 특히 저 유전상수 값을 가지는 박막을 밀도가 큰 플라즈마와 함께 fluorocarbon 가스를 이용하여 식각을 하게 되면 매우 복잡한 현상이 생긴다. 따라서 식각률에 대한 모델을 세우고 적용하는 일이 매우 어렵다. 본 연구에서는 CF4가스를 Ar가스와 함께 혼합하고 기판 플라즈마와 유도결합형 플라즈마를 동시에 가진 식각장비를 사용하여, 저 유전상수 값을 갖는 박막을 식각하였다. 또한, 간단한 식각모델인 Langmuir adsorption model를 이용하여 식각률(Etch rate)에 대한 합리적인 이해를 얻기 위해, 기판과 유도결합형 플라즈마의 파워에 따른 식각률을 계산하고, 식각모델에서 사용되는 매개변수인 이온플럭스(Ion Flux)와 식각수율(Etch yield)을 연구하였다. 기판의 플라즈마 파워가 20에서 100 W 증가하면서 식각률이 269에서 478 nm/min로 증가하였으며, 식각수율이 0.4에서 0.59로 증가하는 것을 관찰하였다. 반면에 기판의 플라즈마 파워 증가에 따라 이온 플럭스는 3.8에서 $4.7mA/cm^2$로 변화가 크지 않았다. 또한, 유도결합형 플라즈마의 파워가 100에서 500 W 증가하면서, 식각률이 117에서 563 nm/min로 증가하였으며, 이온플럭스가 1.5에서 $6.8mA/cm^2$으로 변화하였다. 그러나, 식각수율은 0.46에서 0.48로 거의 변화하지 않았다. 그러므로 저 유전상수 값을 가지는 박막 식각의 경우, 기판의 플라즈마는 식각수율을 증가시키며 유도결합형 플라즈마는 이온 플럭스를 증가시켜 박막 식각에 기여하는 것으로 사료된다.

• Knowledge Management Research
• /
• v.23 no.1
• /
• pp.89-109
• /
• 2022

Due to COVID-19 and soaring participation of individual investors, large-scale transactions exceeding system capacity limits have been reported frequently in the capital market. The capital market IT systems, which the impact of system failure is very critical, have encountered unexpectedly tremendous transactions in 2020, resulting in a sharp increase in system failures. Despite the fact that many companies maintained large-scale system capacity planning policies, recent transaction influx suggests that a new approach to capacity planning is required. Therefore, this study developed capital market IT system capacity planning models using machine learning techniques and analyzed those performances. In addition, the performance of the best proposed model was improved by using sentiment index that can promptly reflect the behavior of investors. The model uses empirical data including the COVID-19 period, and has high performance and stability that can be used in practice. In practical significance, this study maximizes the cost-efficiency of a company, but also presents optimal parameters in consideration of the practical constraints involved in changing the system. Additionally, by proving that the sentiment index can be used as a major variable in system capacity planning, it shows that the sentiment index can be actively used for various other forecasting demands.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2020

This study examined the braking characteristics of a heavy haul freight train with P4a distribution valves applied to domestic high-speed freight trains. A freight train was composed of 50 cars, which is twice the normal operation. A braking test was performed to confirm the characteristics of the braking of a heavy haul. The brake cylinder pressures were measured for emergency and service braking on the 1st, 10th, 20th, 30th, and 50th cars. Because the brake signal is transmitted to the pressure through the braking tube connected to the end of the train, the rear vehicle is braking later than the vehicle ahead. Therefore, it is necessary to predict the brake pressures in all cars in a train to supplement the results of the limited tests and calculate the braking distance. The pressure in each car was determined using empirical models of linear interpolation, stepwise, and exponential models, which provided reliable information. The predictive results of the empirical models were compared with the measured results, and the exponential model was predicted relatively accurately. These results are expected to contribute to the safe operation of heavy haul freight trains and can be used to predict the braking distance and calculate the level of impact between vehicles during braking.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.365-377
• /
• 1997

Much of the Cumberland Plateau of Tennessee, USA is in mixed hardwoods for which there are no applicable growth and yield predictors. Use of site index as a variable in growth and yield prediction models is limited in most stands because their history is not known and many may not be even-aged. Landtypes may offer an alternative to site index for these mixed stands because they were designed to include land of about equal productivity. To determine vegetation by landtype, dependency between landtype and detailed forest type was tested with Chi-square. Differences in productivity among landtypes were tested by employing regression analyses and analysis of variance(ANOVA). Basal area growth was fitted to the nonlinear models developed by Moser and Hall(1969). Basal area growth and volume growth were also predicted as a function of initial total basal area and initial volume with linear regression by landtype and by landtype class. Differences in basal area growth and volume growth by landtype were tested with ANOVA. Dependency between site class and landtype was tested with Chi-square. Vegetation types seem to be related to landtypes in the study area although the validity of the test is questionable because of a high proportion of sparsely occupied cells. No statistically significant differences in productivity among landtypes were found in this study.