• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.25-31
• /
• 2008

As we choose ground control points for aerial triangulation, we have a lot of problems in a mountain, a costal area, a desert, the foreshore etc because they don't have clear topography for control points and it spends a lot of cost and occurs problems of accuracy. In this study, we compare and analyze between ground control points from LiDAR intensity, digital map with ground control points from the field survey as doing AT each. As the result, the average error was ${\pm}1.02m$ from using LiDAR intensity, ${\pm}1.13m$ from using digital map. this result can present the control points from LiDAR intensity is 0.11m better than from digital map.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.177-186
• /
• 2021

For disaster management and mitigation of earthquakes in Korea Peninsula, active fault investigation has been conducted for the past 5 years. In particular, investigation of sediment-covered active faults integrates geomorphological analysis on airborne LiDAR data, surface geological survey, and geophysical exploration, and unearths subsurface active faults by trench survey. However, the fault traces revealed by trench surveys are only available for investigation during a limited time and restored to the previous condition. Thus, the geological data describing the fault trench sites remain as the qualitative data in terms of research articles and reports. To extend the limitations due to temporal nature of geological studies, we utilized a terrestrial LiDAR to produce 3D point clouds for the fault trench sites and restored them in a digital space. The terrestrial LiDAR scanning was conducted at two trench sites located near the Yangsan Fault and acquired amplitude and reflectance from the surveyed area as well as color information by combining photogrammetry with the LiDAR system. The scanned data were merged to form the 3D point clouds having the average geometric error of 0.003 m, which exhibited the sufficient accuracy to restore the details of the surveyed trench sites. However, we found more post-processing on the scanned data would be necessary because the amplitudes and reflectances of the point clouds varied depending on the scan positions and the colors of the trench surfaces were captured differently depending on the light exposures available at the time. Such point clouds are pretty large in size and visualized through a limited set of softwares, which limits data sharing among researchers. As an alternative, we suggested Potree, an open-source web-based platform, to visualize the point clouds of the trench sites. In this study, as a result, we identified that terrestrial LiDAR data can be practical to increase reproducibility of geological field studies and easily accessible by researchers and students in Earth Sciences.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.1
• /
• pp.23-35
• /
• 2016

Recently, along with the development of IT, the non-linearity and enlargement in the response to the combination of the building industry and IT have made a wide variety in outer shapes of the buildings. So buildings need a more accurate representation using visually superior three-dimensional space information. Therefore, the study models the shapes of the other buildings in accordance with the heights. Frist of all, we measured the buildings using a Terrestrial LiDAR. Second, we obtained a high-density point cloud date of the buildings. Through this data, we made the BIM model and compared the heights of each floor's outer information layers. And then identified the BIM data status using IFC standards formats. From this data, it proposes a new 3D cadastre and the alternative for the establishment of spatial information.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.4
• /
• pp.53-61
• /
• 2019

Occurrences of debris flow are a serious danger to roads and residential located in mountainous areas and cause a lot of property loss. In this study, two basins were selected and spatial data were constructed to simulate the occurred debris flow from mountainous areas. The first basin was to use the Terrestrial LiDAR to scan the debris flow occurrence section and to build terrain data. For the second basin, use drones the sediment in the basin was photographed and DSM (Digital surface model) was generated. And to analyze the effect of the occurrence of debris flow on downstream side, FLO-2D, two-dimensional commercial model, was used to simulate the flow region of the debris flow. And it was compared with the sedimentation area of terrestrial LiDAR and drone measurement data.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.233-244
• /
• 2021

This study investigated the application of terrestrial light detection and ranging (LiDAR) to inspect the defects of the vegetated levee. The accuracy of vegetation filtering techniques was compared by applying filtering techniques on photogrammetric point clouds of a vegetated levee generated by terrestrial LiDAR. Representative 10 vegetation filters such as CIVE, ExG, ExGR, ExR, MExG, NGRDI, VEG, VVI, ATIN, and ISL were applied to point cloud data of the Imjin River levee. The accuracy order of the 10 techniques based on the results was ISL, ATIN, ExR, NGRDI, ExGR, ExG, MExG, VVI, VEG, and CIVE. Color filters show certain limitations in the classification of vegetation and ground and classify grass flower image as ground. Morphological filters show a high accuracy of the classification, but they classify rocks as vegetation. Overall, morphological filters are superior to color filters; however, they take 10 times more computation time. For the improvement of the vegetation removal, combined filters of color and morphology should be studied.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.4
• /
• pp.71-78
• /
• 2022

Recently, mountain disasters such as landslides and debris flows have flowed along mountain streams and hit residential areas and roads, increasing damage. In this study, in order to reduce damage and analyze causes of mountain disasters, field surveys and Terrestrial LiDAR terrain analysis were conducted targeting debris flow areas, and debris flow flow processes were simulated using FLO-2D and RAMM models, which are numerical models of debris flows. In addition, the debris flow deposition area was calculated and compared and analyzed with the actual occurrence section. The sedimentation area of the debris flow generation section of the LiDAR scan data was estimated to be approximately 21,336 ㎡, and was analyzed to be 20,425 ㎡ in the FLO-2D simulation and 19,275 ㎡ in the case of the RAMMS model. The constructed topographical data can be used as basic data to secure the safety of disaster risk areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.169-175
• /
• 2006

Recently, slope failures are disastrous when they occur in mountainous area adjoining highways. The accidents associated with slope failures have increased due to rapid urbanization of mountainous area. Therefore, the inspection of slope is conducted to maintain road safety as well as road function. In this study, we apply to the remedy which is comparing existent description to advanced technology using GIS. We utilize a Terrestrial LiDAR, one of the advanced method, to generate precise and complete road slope model from expert point of view. In result, we extract hazardous slope information from external measurements referring to the evaluation criteria of external slope stability. We suggest not only the database but also the method of road risk evaluation based on internet GIS.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.755-756
• /
• 2008

지리정보시스템(GIS)은 경제발전, 환경보전, 도시계발 등에서 중요한 역할을 하고 있다. 지리정보시스템에서 빈도높게 측정되고 있는 것은 LiDAR(고정밀 항공 레이저 측량기술) 데이터로써 높은 위치정확도를 지니며, 데이터의 취득시 바로 지상좌표를 취득함으로써 좌표의 변환이 필요 없기 때문에 좀더 빠르게 데이터를 처리할 수 있는 장점을 가지고 있다. 본 연구에서는 이러한 LiDAR의 자료와 구글어스 등과 같이 2차원 영상을 획득한 경우, 3차원의 LiDAR 데이터를 2차원에 매핑시키는 방법을 연구하였다. 2차원 영상의 기준점을 정확하게 파악하는한 3차원의 LiDAR 데이터와 정확하게 일치하는 것으로 확인되었다.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.125-132
• /
• 2017

The slope of the road in the forest area has a characteristic of steep slope, so natural disasters such as slope collapse occur. The slope displacement observation technique according to landslide is being studied as a method to observe a wide area and a method to observe a small area. This is a study on high-precision digital map generation using ground LiDAR. It is possible to create a high - precision digital map by minimizing the US side using the 3D LiDAR in the steep slope area where the GPS and Total Station measurement are difficult in the maintenance of the danger slope area. It is difficult to objectively evaluate whether the contour lines generated by LiDAR are correct and it is considered necessary to construct a test bed for this purpose. Based on this study, if terrain changes such as landslides occur in the future, it will be useful for measuring slope displacement.

• Korean Journal of Remote Sensing
• /
• v.31 no.2
• /
• pp.127-136
• /
• 2015

This study aims to quantify the stand-level above ground biomass in intact tropical rain forest of Brunei using airborne LiDAR data. Twenty four sub-plots with the size of 0.09ha ($30m{\times}30m$) were located in the 25ha study area along the altitudinal gradients. Field investigated data (Diameter at Breast Height (DBH) and individual tree position data) in sub-plots were used. Digital Surface Model (DSM), Digital Terrain Model (DTM) and Canopy Height Model (CHM) were constructed using airborne LiDAR data. CHM was divided into 24 sub-plots and 12 LiDAR height metrics were built. Multiple regression equation between the variables extracted from the LiDAR data and biomass calculated by using a allometric equation was derived. Stand-level biomass estimated from LiDAR data were distributed from 155.81 Mg/ha to 597.21 Mg/ha with the mean value of 366.48 Mg/ha. R-square value of the verification analysis was 0.84.