• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.41-44
• /
• 2007

Ground test facility for the hypersonic propulsion system was designed, constructed and performance test was conducted. The design point was selected using quasi，1-Dimensional CFD analysis before the conceptual design for construction of hypersonic facility After that, specific designs for performance and components were completed using unit analysis CFD code and performance tests were conducted for the various operation conditions.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2014

Goheung aeronautical center is located in the area of Goheung of which land is reclaimed from sea and has a runway of length 700m, width 25m with test facility which has been used for flight test of UAV and small aircraft. To support the enhancement of aircraft safety, 1090ES ADS-B ground system as the ground surveillance system has been implemented. ADS-B system based on GPS and digital data link provides the function of enhancing the aircraft safety through flight information among aircrafts. This paper gives the result that the implementation of ADS-B ground system and the flight test with onboard ADS-B transmitter has been conducted.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.183.2-183.2
• /
• 2012

최근 인공위성의 대형화 및 중량화 추세는 종종 기존 설비 내에서의 위성체 조립 및 시험업무의 작업성과 능률성을 심각하게 저해하는 요소로 작용한다. 이에 상기 업무의 원활한 수행을 위해서는 최적화된 설계의 기계지상지원장비(Mechanical Ground Support Equipment, MGSE)의 개발 및 활용이 요구되어지며, 이는 전체 위성개발기간 동안 요구되는 모든 시험 구성, 외부 설비 및 장비와의 인터페이스, 작업자의 동선 및 접근성 등을 종합적으로 고려해야 하는 작업이다. 특히 고해상도 영상안테나와 같이 높은 수준의 정렬 조건이 부과되는 탑재체의 경우 이의 장착, 정렬 및 지상전개시험 등을 위해서는 탑재체 및 위성체의 특성을 고려한 전용 장비의 개발도 필수적이다. 본 논문에서는 한국항공우주연구원이 최근 개발한 중대형급 지상관측 영상레이더 위성 개발 과제에 활용된 기계지상지원장비의 설계, 제작 및 운용 방법을 종합적으로 기술하였다.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.87-93
• /
• 2013

The conceptual design lunar lander demonstrator has been developed to use as a test bed for advanced spacecraft technologies and to test a prototype planetary lander capable of vertical takeoff and landing. Size of the lunar lander demonstrator is the same as that of lunar lander conceptually designed, however, the weight of lunar lander demonstrator is designed in 1/6 scale in consideration of gravity difference between moon and earth. The thruster clustering and virtual flight test were performed in the demonstrator fixed on the ground. The demonstrator ground test has been conducted for two months in the test site for the solid motor combustion of the Goheung Flight Center. The purposes of ground test of demonstrator are to demonstrate and verify essential electronics, propulsion system, control algorithm, embedded software, structure and system operation technologies before developing the flight model lander. This paper is described about the virtual flight test including test configuration, test aims and test facilities

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.189.1-189.1
• /
• 2012

자장센서는 인공위성에 장착되어 궤도환경에서의 지자기장을 측정하는 센서로서 위성체의 자세결정과 자세제어 등에 활용된다. 일반적으로 자장센서는 원리와 응용범위에 따라 그 종류가 광범위하다. 응용되는 자기현상적으로 분류하면 Faraday 전자기 유도법칙을 이용한 방식, Hall Effect를 이용한 방식, 감지코일의 인덕턴스 변화와 와전류효과를 이용한 방식, 자속분포의 변화에 의한 유도기전력의 변화를 이용한 방식, 자기저항 변화효과를 이용한 방식 등이 있다. 그 중에서도 Faraday's Law를 이용하는 Fluxgate 자장센서가 구조가 비교적 간단하고 경량이며, 높은 신뢰성과 안정성을 가진다. 실제 위성을 발사하기전 지상에서는 위성체를 조립하고 전자파, 진동, 열진공 등과 같은 다양한 환경시험을 수행하는데, 이때 각 환경시험 수행을 전후로 자장센서의 극성시험, 응답시험 등과 같은 기능시험을 수행한다. 본 논문은 다양한 환경시험을 통해 수행한 Fluxgate 자장센서 기능시험 데이터에 대한 추이를 분석하여 위성 발사전 지상에서의 자장센서의 상태와 건전성을 진단하는 방법에 대하여 소개한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.23-28
• /
• 2011

The engine ground and altitude tests were carried out to investigate the effect of jet fuel alteration on the performance of a small turbojet engine. JP-S was supplied 8% higher than JP-8 by fuel metering system at the same command. The employment of JP-S showed the similar starting characteristic to that of JP-8, however, difference in the ignition time and acceleration rate of engine speed due to the difference of fuel flow rate by fuel metering system was observed. In spite of jet fuel alteration, the test results yield the similar steady-state engine performance in net thrust, air flow, exhaust gas temperature, etc. On the other hand, the fuel consumption of JP-S increased by 5 % compared with that of JP-8. In point of specific fuel consumption (SFC), SFC of JP-S was approximately 1.1~2.6 %, 5 % higher than that of JP-8 in ground and altitude tests respectively at the same thrust.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.410-415
• /
• 2010

The engine ground and altitude tests were carried out to investigate the effect of jet fuel alteration on the performance of a small turbojet engine. JP-S was supplied 8% higher than JP-8 by fuel metering system at the same command. The employment of JP-S showed the similar starting characteristic to that of JP-8, however, difference in the ignition time and acceleration rate of engine speed due to the difference of fuel flow rate by fuel metering system was observed. In spite of jet fuel alteration, the test results yield the similar Steady-State engine performance in Net thrust, Air flow, Exhaust Gas Temperature, etc. On the other hand, the Fuel consumption of JP-S increased by 5 % compared with that of JP-8. In point of Specific Fuel Consumption (SFC), SFC of JP-S was approximately 1.1~2.6 %, 5 % higher than that of JP-8 in ground and altitude tests respectively at the same thrust.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.9-9
• /
• 2000

우주추진기관의 모든 부품은 생산 시 규정된 절차를 거쳐서 작동의 이상유무를 확인하는 시험을 거친다. 우주추진기관은 특별한 경우를 제외하고는 실 비행 상태에서 시험하기가 어렵거나 불편하기 때문에 지상에서 시험을 수행하여 성능 및 안정성 등을 확인하게 된다. 지상연소시험을 수행하기 위해서는 비행용 엔진을 대상으로 엔진 메니폴드에 비행 시와 같은 조건의 추진제가 공급될 수 있게 해줘야 한다. 기존에 시험장이 이미 구축되어 있는 경우 엔진의 운용조건에 맞추어 엔진에 맞게 엔진과 시험설비 연결부분이 수정되게 된다.(중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.157-162
• /
• 2006

A Liquid Rocket Engine(LRE) ground firing test facility was built in Korea Aerospace Research Institute(KARI) in 2001 to develop the LRE for the first Korean liquid rocket, KSR-III. Around 170 tests were conducted since its establishment until recently by September 2006, and in the meantime, a considerable improvements were made in the capability. This paper describes the outline, conducted tests and operation techniques which have been accumulated through the operation of KARI LRE ground firing test facility.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.43-49
• /
• 2007

A ground firing test facility for Liquid Rocket Engine(LRE) combustor was built in Korea Aerospace Research Institute(KARI) in 2001 to support the development of the first Korean LRE for the KSR-III. About 170 tests were conducted up to date since its establishment and in the meantime a considerable improvements were made in the facility capability. This paper describes the outline, conducted tests and operation techniques which have been acquired through the operation of the test facility.