• Korean Journal of Ecology and Environment
• /
• v.37 no.2 s.107
• /
• pp.255-262
• /
• 2004

Growth patterns after the cutting and burning of Miscanthus sacchariflorus community were analyzed in the Woopo Wetland. Three replicates of 5 ${\times}$ 5 m plot of control, burning, and cutting treatments were established in April 2003 and changes of growth pattern were monitored by August 2003. In the control, burning, and cutting plots, a total of 7 families and 8 species, 14 families and 18 species, 6 families and 8species were observed respectively. Burning plot showed high diversity of flora. However, high diversity declined after July and all plots showed a similar species diversity. Vine plant, Humulus japonicus, dominated in the burning plots. Change of shoot density was highest in the early period in the burning plots (176/$m^2$) and shoot density in early May was almost double of the control and cutting plots. Toward to the end of active growth period (August), shoot density in cutting plot (170 ${\pm}\;7/m^2$)was higher than that of burning plots (141 ${\pm}\;9/m^2$). Shoot length of the cutting, burning, and control plot was 205 ${\pm}$ 15 cm, 190 ${\pm}$ 17 cm, and 187 ${\pm}$ 6 cm (n> 100) respectively. Above- ground biomass of cutting plots was higher than that of burning and control plots. Above- ground biomass of cutting plot was 1.6 times higher than the control while burning plot showed 1.4 times. This study indicted that cutting of Miscanthus sacchariflorus community increase shoot density development, length growth, and above- ground biomass.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.270-277
• /
• 2008

Vacuum is any air or gas pressure less than a prevailing pressure in an environmental or, specifically, any pressure lower than the atmospheric pressure and is used by a wide variety of scientists and engineering - including clean environment, thermal insulation, very long mean free path, plasma, space simulation[1]. The space environment is characterized by such a severe condition as high vacuum, and very low and high temperature. Since a satellite will be exposed to such a space environment as soon as it goes into its orbit, space environmental test should be carried out to verify the performance of the satellite on the ground under the space environmental conditions. A general and widely used method to simulate the space environment is using a thermal vacuum chamber which consists of vacuum vessel and thermally controlled shroud. As indicated by name of vacuum chamber, the vacuum technology is applied to design and manufacture of the thermal vacuum chamber. This paper describe the vacuum technology which is applied to space business.

• Journal of Korea Water Resources Association
• /
• v.55 no.12
• /
• pp.1053-1064
• /
• 2022

The Thiessen method, which is the current area average precipitation method, has serious structural limitations in accurately calculating the average precipitation in the watershed. In addition to the observation accuracy of the precipitation meter, errors may occur in the area average precipitation calculation depending on the arrangement of the precipitation meter and the direction of the heavy rain. When the watershed is small and the station density is sparse, in both simulation and observation history, the Thiessen method showed a peculiar tendency that the average precipitation in the watershed continues to increase and decrease rapidly for 10 minutes before and after the peak. And the average precipitation in the Thiessen basin was different from the rainfall radar at the peak time. In the case where the watershed is small but the station density is relatively high, overall, the Thiessen method did not show a trend of sawtooth-shaped over-peak, and the time-dependent fluctuations were similar. However, there was a continuous time lag of about 10 minutes between the rainfall radar observations and the ground precipitation meter observations and the average precipitation in the basin. As a result of examining the ground correction effect of the rainfall radar watershed average precipitation, the correlation between the area average precipitation after correction is rather low compared to the area average precipitation before correction, indicating that the correction effect of the current rainfall radar ground correction algorithm is not high.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1181-1185
• /
• 2009

Adaptive Nuero-Fuzzy Inference System(ANFIS) 모형은 인공신경망과 퍼지모형의 특징을 가지는 모형으로 자료간의 관계가 선형이 아닌 비선형관계를 가질 경우 매우 정확한 예측 모형을 구축할 수 있는 특징이 있다. 월강수량 예측이 관측된 기상자료들과 비선형 관계에 있다고 생각되어 ANFIS 모형을 이용하여 월강수량을 예측하였다. 본 연구의 대상 지점으로는 금강유역의 대전 지점으로 선정하였다. 금강유역은 우리나라의 한가운데 위치하여 평균적인 강수형태 및 특징을 보여 좋은 실험유역으로 생각되어 선정하였다. 금강유역의 기상청에서 운영하는 지상 유인관측소 중 비교적 금강유역을 대표하고 양질의 자료가 기록되어 있다고 판단되는 대전지점을 실험지점으로 생각되어 선정하였다. 기상청 대전 유인 관측소에는 총 39년치 기상 자료가 기록되어 있다. 기상청에서는 전국 주요 도시들을 대상으로 2003년부터 월간 예보를 하고 있다. 본 연구에서는 기상청 월간예보와 기상청 대전 유인관측소에서 관측된 5년 치 기상자료를 모델의 입력자료로 구성하였다. 적절한 입력변수 조합을 구성하기 위하여 반복해법을 적용하였다. 5년 치 자료 중 절반은 학습을 시키는데 사용하였고 나머지 절반을 이용하여 모형을 검증하였다. 여러 입력변수를 이용하여 모형의 학습시킨 결과 입력변수가 3개 일 경우 가장 높은 정확도를 보였다. 입력변수가 3개로 학습 시킨 ANFIS 모형과 기상청에서 제공하는 월간예보를 비교해본 결과 ANFIS 모형을 적용하여 월 강수량을 예측하는 것이 기상청에서 제공하는 월간예보보다 높은 정확도를 보이는 것을 확인할 수 있었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.104-107
• /
• 2004

The crack widths of reinforced concrete flexural members are influenced by repetitive fatigue loadings. The bond stress-slip relation is necessary to estimate these crack widths realistically. The purpose of the present study is, therefore, to propose a realistic model for bond stress-slip relation under repeated loading. To this end, several series of tests were conducted to explore the bond-slip behavior under repeated loadings. Three different bond stress levels with various number of load cycles were considered in the tests. The present tests indicate that the bond strength and the slip at peak bond stress are not influenced much by repeated loading if bond failure does not occur. However, the values of loaded slip and residual slip increase with the increase of load cycles. The bond stress after repeated loading approaches the ultimate bond stress under monotonic loading and the increase of bond stress after repeated loading becomes sharper as the number of repeated loads increases. The bond stress-slip relation after repeated loading was derived as a function of residual slip, bond stress level, and the number of load cycles. The models for slip and residual slip were also derived from the present test data. The number of cycles to bond slip failure was derived on the basis of safe fatigue criterion, i.e. maximum slip criterion at ultimate bond stress.

• Current Industrial and Technological Trends in Aerospace
• /
• v.4 no.2
• /
• pp.55-67
• /
• 2006

20세기에 탄생한 동력비행기는 인간의 이동능력을 비약적으로 향상시켰다. 인류의 미개척지였던 항공분야의 발전은 지속적인 기술개발을 통해 더 빨리, 더 멀리, 더 높이 향하기 위해서 계속 나아가고 있다. 이러한와중에 최근에 괄목할 만한 성장을 이룬 컴퓨터와 소프트웨어 산업의 발전은 비행임무에 따라 위험성이 높거나, 사람이 하기 힘든 반복적이고 지루한 비행을 대신하기위한 로봇 비행체 즉, 무인항공기의 개발을 가능하게 하였다. 무인항공기의 탄생 초기에는 조종사의 희생을 줄이기 위해 군사 분야에서 주로 사용되었으나, 산림감시나 해안정찰, 기상관측, 재난관측, 조난자 수색 등 민수분야의 임무로 점차 활동영역이 넓혀지고 있다. 현재 무인항공기에 탑재된 인공지능의 수준은 안정된 비행이 가능하도록 하는 자동조종(autopilot)과 주어진 비행경로를 추종하기위한 항법유도(Navigation & Guidance)정도이며, 비행 중 발생하는 비상상황에 대처하기 위한 의사판단은 지상의 조종자에 의해 결정된다. 앞으로는 계획되지 않은 상황을 맞이했을 때 무인기 스스로 판단하여 경로를 변경하고, 동시에 여러 무인기들과 협력하여 임무를 수행함으로써 임무효율을 높이는 방향으로 인공지능의 수준이 향상될 것이다. 본 논문에서는 최근의 무인항공기 개발추세와 이들 무인기에 고려되고 있는 제어기에 대해 살펴보고, 향후 무인항공기에 적용될 자율비행 알고리듬과 제어기 시스템의 개발동향에 대해 고찰하였다.

• Toxicological Research
• /
• v.20 no.4
• /
• pp.339-348
• /
• 2004

Paecilomyces sinclairii was administered ad libitum feeding at percentage levels of 0, 1.25, 2.5, 5 and 10 percentage (calculated about 8 g/kg)/feeder for a period of 3 months. There was no observed clinical signs or deaths related to treatment in all groups tested. Therefore, the approximate lethal dose of P. sinclairii was considered to be higher than 8 g/kg in rats. Mild decreases in body weight gain were observed dose-dependently in P. sinclairii treated groups in dose response manner after 2 weeks. Interestingly, the weight of abdominal adipose tissues surrounding epididymides were greatly reduced by this Dongchunghacho, in parallel with the mild increase in body weight gain. However, the absolute weight change of other organs was not observed. There were not significantly different from the control group in urinalysis, ocular examination, hematological, serum biochemical value and histopathological examination. From these results, it is concluded that the no-observed-adverse-effect level (NOAEL) of P. sinclairii is less than 1.25% (1 g/kg) in rats in the present study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.245-248
• /
• 2005

It should be noted that the critical chloride threshold level is not considered to be a unique value for all conditions. This value is dependent on concrete mixture proportions, cement type and constituents, presence of admixtures, environmental factors, steel reinforcement surface. conditions, and other factors. In this study, the accelerated corrosion test for reinforcing steel was conducted by electrochemical and cyclic wet and dry seawater method, respectively and during the test, corrosion monitoring by half cell potential method was carried out to estimate the chloride corrosion threshold value when corrosion for reinforcing steel in concrete was perceived. For this purpose, lollypop and right hexahedron test specimens were made for 31.4$\%$, 41.5$\%$ and 49.7$\%$ of w/c, respectively and then the accelerated corrosion test for reinforcing steel was executed. It was observed from the test that the time to initiation of corrosion was found to be different with water-cement ratio and accelerated corrosion test method, respectively and the chloride corrosion threshold value was found to range from 0.91 to 1.43 kg/$m^{3}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.521-531
• /
• 2001

This paper presents the extraction scheme of the scattered waves by a target above the ground using the buried antenna in a lossy and dispersive medium. The half wave dipole antennas are used to transmit and to receive a signal. The transmission line model as a feeding model is considered to take into account the effect of transmission line in a real system. The ground is modeled by the 2nd order Debye approximation with the dispersion and loss. PLRC algorithm and DPML as absorbing boundary condition are utilized to apply the 2nd order Debye approximation to FDTD. To extract the scattered wave, in addition, we employed the delay time extraction algorithm. The simulations are conducted to observe the variation of magnitude in scattered wave and detection of target position according to the change of moisture content of the lossy medium.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.126-135
• /
• 2003

To investigate the DTV coverage especially in downtown areas and improve the performance of DTV receivers, it is necessary to capture the receiving DTV signals that contain the complex characteristics of the real-world RF environments and regenerate them in a laboratory without the performance degradation. In this paper, we developed a DTV RF capture and regeneration system adapting digital signal processing and high speed hard disk storage techniques and analyze its characteristics. The system can capture and replay the DTV RF signals based on a real-time condition in a hard disk. There Is no time limit for capturing RF data within the installed storage capacity. We can expect various Possible applications for this system such as a tool for the development of the receiver performance analysis, design and analysis for the DTV coverage areas, etc.