• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.66-71
• /
• 2009

최근 가상도시, 위치기반시스템 등 여러 분야에서 도심지역의 고해상도 DSM의 수요가 증가하고 있다. 고해상도 DSM을 획득하는데 항공 라이다 측량은 가장 효율적이고 경제적인 방법으로 인정받고 있다. 그러나 레이저 펄스는 도시건물의 모서리와 코너보다는 주로 표면에서 반사되기 때문에 일반적으로 라이다 DSM은 명확한 수직 breakline을 포함하기 힘들다. 이에 본 연구에서는 라이다 데이터와 항공영상의 결합을 통해서 고품질의 도시지역 DSM을 생성하는 새로운 방법을 제안하고자 한다. 제안된 방법은 (1) 서로 다른 두 센서에서 획득된 라이다 데이터와 영상의 기하 정합, (2) 라이다 데이터를 이용한 영상정합, (3) 영상정합을 통해 획득된 지상점과 라이다 데이터를 이용한 DSM 생성순으로 이루어진다. 영상 정합을 위한 지상점의 초기값으로 대상지의 평균고도를 높이로 사용하는 것이 아니라 라이다 데이터로부터 얻어진 높이를 사용한다면 영상 정합이 아주 정밀하게 이루어 질 수 있다. 이와 함께 정합된 영상으로부터 얻어진 지상점은 라이다 데이터 보다 더 높은 밀도를 갖게 된다. 따라서 DSM 생성을 위한 격자에 라이다 데이터와 영상정합의 결과로 얻어진 지상점 모두를 내삽에 이용하여 DSM을 생성하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.139-140
• /
• 2008

지상라이다는 고정도의 3차원 영상을 제공하고 레이저 빔을 현장이나 대상물에 발사하여 짧은 시간에 수백만점의 3차원좌표를 기록할 수 있는 최신 측량장비로서 다양한 응용분야에서 두각을 나타내고 있다. 본 연구에서는 지상라이다를 이용한 건축물의 3자윈 자동 윤곽선 추출을 다룬다. 지상라이다는 건축물의 3차원 윤곽선을 신속하게 추출할 수 있지만 지상기반 시스템이므로 여러 가지 장애물 때문에 건국물의 하단부에서는 추출이 쉽지 않다. 기존 항공라이다를 이용한 알고리즘에서는 사진의 색상차나 모폴로지 특성에 의존하여 범위를 제한하고, 이를 기반으로 윤곽선을 추출하였다. 하지만 지상라이다의 경우 항공라이다에 비해 분해능이 월등히 높다. 또한, 지상라이다는 지상에서 측정하기 때문에 항공라이다에서 어려운 건축물의 측면이나 정면도 윤곽선 추출이 가능하기 때문에 본 논문에서는 사진을 이용하지 않고 전처리를 하지 않은 데이터를 직접 이용하여 건물의 정면 윤곽선을 추출하는 것을 제안한다. 건물의 크기와 데이터 수 즉, 라이다로 측정한 포인트 수를 고려한 효율적인 Decimation방법을 제안하고 또한, Decimation된 데이터이서 지역적으로 제일 큰 값과 작은 값을 찾아낸다. 그 중 많이 벗어난 점을 편차를 이용하여 제거한다. 이렇게 찾아낸 건축물의 외곽점들을 이어 만든 윤곽선을 최종적으로 보간하여 좀 더 현실과 가까운 윤곽선 추출 방법을 제안한다.

• Spatial Information Research
• /
• v.15 no.1
• /
• pp.53-65
• /
• 2007

Terrestrial laser scanner provides highly accurate, 3D images and by sweeping a laser beam over a scene or object, the laser scanner is able to record millions of 3D points' coordinates in a short period, so becoming distinguished in various application fields as one of the representative surveying instruments. This study deals with 3D building boundary extraction using Terrestrial Laser Scanner. The results shows that high accuracy 3D coordinates for building boundaries are possibly acquired fast, but terrestrial laser scanner is a ground-based system, so "no roofs", and "no lower part of building" due to trees and electric-poles, etc. It is expected that the combination of total station, terrestrial laser scanner, airborne laser scanner with aerial photogrammetry will contribute to the acquisition of an effective 3D spatial information.

• Electronics and Telecommunications Trends
• /
• v.27 no.6
• /
• pp.134-143
• /
• 2012

지구과학 및 우주 탐사를 목적으로 지속적으로 발전해 온 라이다 센서 기술은 현재 항공기 및 위성에 탑재되어 정밀한 지구 지형 및 환경 관측을 위한 주요 수단으로 사용되고 있으며, 우주 정거장과 우주선의 도킹 시스템, 우주 탐사 로봇에 활용되고 있다. 지상에서는 원거리 거리 측정, 자동차 속도 위반 단속 등을 위한 간단한 형태의 라이다 센서를 비롯하여 최근에는 3차원 영상 복원을 위한 레이저 스캐너, 미래 무인자동차를 위한 3차원 영상 센서의 핵심 기술로 활용되면서 그 활용성과 중요성이 점차 증가되고 있다. 본고에서는 라이다 센서의 기본 원리 및 종류, 최근 영상 라이다 센서 기술동향, 응용 분야의 몇 가지 예를 요약하여 소개함으로써, 국내 기반 기술 및 상용화 개발이 취약한 라이다 센서에 대한 이해를 돕고자 한다.

• New & Renewable Energy
• /
• v.7 no.2
• /
• pp.43-50
• /
• 2011

The only practical way to measure wind resource at high-altitude over 100 m above ground for a feasibility study on a high-rise building integrated wind turbine might be ground-based remote sensing. The remote-sensing campaign was performed at a 145 m-building roof in Jamsil where is a center of metropolitan city Seoul. The campaign aimed uncertainty assessment of Leosphere WindCube LIDAR and Scintec MPAS SODAR through a mutual comparison. Compared with LIDAR, the data availability of SODAR was about 2/3 at 550 m altitude while both showed over 90% under 400 m, and it is shown that the data availability decrease may bring a distortion of statistical analysis. The wind speed measurement of SODAR was fitted to a slope of 0.92 and $R^2$ of 0.90 to the LIDAR measurement. The relative standard deviation of wind speed difference and standard deviation of wind direction difference were evaluated to be 30% and 20 degrees, respectively over the whole measurement heights.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.63-71
• /
• 2011

The remote-sensng campaign was performed at the Pohang Accelerator Laboratory where is located in a basin 6km inland from Yeongil Bay. The campaign aimed uncertainty assessment of Remtech PA0 SODAR through a mutual comparison with WindCube LIDAR, the remote-sensing equipment for wind resource assessment. The joint observation was carried out by changing the setup for measurement heights three times over two months. The LIDAR measurement was assumed as the reference and the uncertainty of SODAR measurement was quantitatively assessed. Compared with LIDAR, the data availability of SODAR was about half. The wind speed measurement was fitted to a slope of 0.94 and $R^2$ of 0.79 to the LIDAR measurement. However, the relative standard deviation was about 17% under 150m above ground level. Therefore, the Remtech PA0 SODAR is judged to be unsuitable for the evaluation of wind resource assessment and wind turbine performance test, which require accuracy of measurement.

• Tunnel and Underground Space
• /
• v.33 no.3
• /
• pp.126-140
• /
• 2023

In this study, the cause of subsidence in limestone mine was analyzed using a LiDAR-based geometry model. Using UAV and ground-based LiDAR systems, a precise geometry model was constructed for the subsidence surface and mine tunnel, and the results of on-site geological survey and rock mass classification were utilized. Through the geometry model, distribution of thickness of crown pillar and faults around the subsidence area, calculation of the volume of the subsidence area and subsidence deposit, and analysis of the subsidence surface inclination were conducted. Through these analyzes, the causes of ground subsidence were identified.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.8-15
• /
• 2011

In this paper, we propose a new structure modeling algorithm from 3D cloud points of terrestrial LADAR data. Terrestrial LIDAR data have various obstacles which make it difficult to apply conventional algorithms designed for air-borne LIDAR data. In the proposed algorithm, the field data are separated into several clusters by adopting the structure extraction method which uses color information and Hough transform. And cluster based Delaunay triangulation technique is sequentially applied to model the artificial structure. Each cluster has its own priority and it makes possible to determine whether a cluster needs to be considered not. The proposed algorithm not only minimizes the effects of noise data but also interactively controls the level of modeling by using cluster-based approach.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.33-40
• /
• 2014

At present, Cadastral map of 2 dimensional is in the stream of changing it to 3 dimensional type supported by GPS and laser techniques. In addition, this steam can be explained at the same time with improvement of equipment of storing much information, support of equipment for imaginative 3D spatial information, and support of equipment of expressing land in 3D Cadastral. This study suggest to apply airborne lidar survey technique on cadastral map to acquire comparably and quickly detailed height of ground. For doing this, this study checked out credibility regarding accuracy of airborne lider survey. After choosing research area, this study has done the airborne lidar survey and acquire the result after surveying Cadastral Comparison Point to check out the accuracy of acquired results. In addition, this study check out the result of Cadastral Comparison Point and airborne lidar survey applied by paired sample t-test based on actual results. The result is that test statistics is 0.322 which is 5 % similar level and null hypothesis cannot be rejected, so this study found out that result of both survey ways are the same. Therefore, the result of airborne lidar survey can be utilized to build up 3D Cadastral information hereafter.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.25-37
• /
• 2017

A study on factors influencing measurement error of Ground-based LiDAR(Light Detection And Ranging) system was conducted in Kimnyeong wind turbine test site on Jeju Island. Three properties of wind including inclined angle, turbulence intensity and power law exponent were taken into account as factors influencing the measurement error of Ground-based LiDAR. In order to calculate LiDAR measurements error, 2.5-month wind speed data collected from LiDAR (WindCube v2) were compared with concurrent data from the anemometer on a nearby 120m-high meteorological mast. In addition, data filtering was performed and its filtering criteria was based on the findings at previous researches. As a result, at 100m above ground level, absolute LiDAR error rate with absolute inclined angle showed 4.58~13.40% and 0.77 of the coefficients of determination, $R^2$. That with turbulence intensity showed 3.58~23.94% and 0.93 of $R^2$ while that with power law exponent showed 4.71~9.53% and 0.41 of $R^2$. Therefore, it was confirmed that the LiDAR measurement error was highly affected by inclined angle and turbulence intensity, while that did not much depend on power law exponent.