• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.4
• /
• pp.335-342
• /
• 2011

Application of FBG (Fiber Bragg Grating) sensors to measure strain of steel roof trusses has been performed. This is to check and confirm the structural integrity of an unusually shaped, reverse shell structure made of reinforced concrete. The issue was to place sensors at proper location and compare the measured values to the results from structural analysis. It has been learned that a deliberate measurement scheme is needed in order to monitor a complex structure during construction. In this study, the measured values were within allowable range of strain, thus confirming the safety of the structure during measurement and construction.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.3
• /
• pp.48-56
• /
• 2020

Prediction of construction cost in the planning stage that provides basic information for feasibility study, budgeting, and planning is an important factor for successful project execution. In this study, a prediction model was developed for the purpose of improving the accuracy of estimating the construction cost of Hanok in the planning stage. The cost of this model is estimated by two methods. First, the cost of wood work, which accounts for the largest portion of the total construction cost, is estimated by calculating the approximate quantity under various conditions (structure type, roof type, plane type, etc.). Second, the cost of the rest work sections except the wood work is estimated by using the unit cost model. The predictive model was verified by two case projects, and the error rate of total construction cost was -4%(case 1) and -6%(case 2). These results showed an error rate in the range that can be applied to practice in the planning stage.

• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.32-42
• /
• 1995

Cultivation using rain shelter is very popular in summer because rain shelter has a simple structure using less materials than any other regular greenhouse. Although it has a main advantage of easy construction in terms of labour, time and cost, it has some disadvantage of poor ventilation and rain fall inflow. Therefore, the rain shelters being able to overcome the problems, to some extent, are necessary to propagate for practical purpose. Three characteristic types of rain shelter were analyzed using measured and simulated environment data. Type 1 was a conventional type with an arched roof, and Type 2 and Type 3 were improved ones which were designed to have three arched roofs and three sawtooth like roofs with the openings for ventilation, respectively. The distribution of inside temperature measured was relatively uniform in Type 2 and 3 by the natural ventilation through the openings of the roof compared to Type 1 which had no openings. The relative light transmittance measured in Type 2 and 3 showed lower than that in Type 1, which suppressed the rise of inside temperature, For more accurate comparison, the differences between inside and outside temperatures to various wind speeds were calculated by the model. The difference in Type 1 was the greatest at lower wind speed below 1 ㎧, that is, the highest in inside temperature, but decreased rapidly as wind speed increased above 1 ㎧. Measured temperatures generally showed the same trends as calculated ones by the model. As a whole, the improved rain shelters(Type 2 and 3) showed better performance than the conventional one in ventilation as well as inside temperature.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.133-140
• /
• 1990

Analysis of cable structures is complex because their force - displacement relationships are highly nonlinear and also because large deformations introduce geometric nonlinearity. Therefore, we must take account their geometric nonlinearity in the analysis and find the equilibrated shape of cable structures. In this paper, to slove these problems, numerical procedures involving geometrical nonlinearity are introduced. They are applicable to general cable net, flexible transmission lines and suspended cable roof. These procedures are divided into two parts; one is to obtain the equilibrated shapes and stresses of the cable structures with uniform load by flexibility iteration method, the other is to analyse the equilibrated structures subjected to nodal external forces by nonlinear finite element method.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.153-153
• /
• 2011

현대 건축은 기능적이고 합리적이었지만 획일적이었던 박스형 건축에서 탈피해 형태와 공간에 있어서 다양한 변화를 시도하고 있다. 특별한 건축물의 실현을 위해 각 나라의 기술력은 급속한 발전을 이루었고, 보다 더 독특한 건축물에 대한 관심은 비정형 건축물에 대한 관심의 증대로 이어지고 있다. 이러한 비정형 건축물에 적합한 구조로써 프리폼(Free-Form) 구조가 있다. 프리폼 구조로 입체골조(Double Layered Structure)를 많이 사용하였으나, 최근 유리로 되어 투명하고 기하학적 모양의 건축물을 추구함에 따라 평면골조(Single Layered Structure)가 증가하고 있는 추세이다. 평면골조는 축력 지배형과 모멘트 지배형으로 분류할 수 있고 프리폼 구조의 구성 요소 중 가장 취약하고 중요한 부분은 노드이다. 본 연구에서는 프리폼 구조 중 가장 큰 관심이 고조되고 있는 평면골조 모멘트 지배형의 노드에 대한 국내외 기술 분석을 통해 향후 연구 방향성을 제시하고자 한다. 입체골조는 하나의 노드에 여러개의 부재가 3차원으로 결합되어야 하기 때문에 다른 골조 시스템에 비해 노드부가 복잡하지만, 건축물의 외관을 유리로 하여 투명하게 하고 비틀리고 구부러진 구조물에 대한 건축적 요구가 많아짐에 따라 평면골조의 인기가 높아지고 있다. 이러한 시대의 흐름에 발맞추어 건물의 구조적, 기하학적 요구를 충족시키기 위해 다양한 노드 시스템이 개발 중이며, 가해지는 하중의 특성에 따라 축력 지배형과 모멘트 지배형으로 구분하여 노드의 양상을 분류할 수 있다. 축력 지배형의 대표적인 시스템은 다이아그리드(Diagrid)이다. 축력 지배형 프리폼 구조의 노드는 전체 구조물의 하중을 축력으로 받아 모두 전달해야 하기 때문에 크기가 크고 가새가 2~4개층에 걸쳐서 설치되기 때문에 중량이다. 모멘트 지배형 노드를 갖는 프리폼 구조의 형태는 대부분 지붕 구조로써 지붕 자체의 하중만을 견디도록 설계된다. 따라서 노드부와 노드에 붙는 부재들이 가볍기 때문에 사람이 들 수 있고 노드의 크기가 작아 시공성이 좋으며 대량 생산이 가능하다는 장점이 있다. 노드의 형태는 힘의 흐름과 쓰임에 따라 다양하다. 평면골조 모멘트 지배형의 노드는 접합방식에 따라 Splice node connection과 End-Face node connection 두 가지로 분류할 수 있다. Splice node connection은 각 부재의 종축으로 노드와 구조부재 사이에 이음재를 두어 연결하고, 연결 형태에 따라 전단력을 전달할 수 있는 1~2개의 접촉면이 생긴다. 전단응력을 받는 볼트로 이음재를 이어 조립하거나 용접으로 접합할 수 있다. 대표 노드로, SBP-1, SBP-2와 POLO-1 등이 있다. End-Face node connection은 각 연결된 부재의 단부와 노드 사이의 연결면은 종축방향의 수직이고, 인장응력을 받는 볼트를 사용하거나 용접에 의해 접합할 수 있다. 대표 노드로 SBP-4, WABI-1, MERO-1(Cylinder), MERO-2(Block), MERO-4(Double Dish) 등이 있다. 본 기술 현황 분석을 통해 현재 개발된 노드를 분류하고 가장 관심이 높은 Single Layer 모멘트 지배형 노드를 비교, 분석하였다. 최근 건물의 경향을 반영한 프리폼 구조를 실현하기 위해서 필수적인 노드의 개발은 국외에서 활발히 연구되고 있지만 그 기술이 개방되어 있지 않다. 국내에서는 동대문 디자인 플라자에 새로운 노드를 적용하고 고려대학교에서 모멘트 지배형 노드를 개발하는 등 발전 가능성을 보이고 있지만 국외 사례들에 비하면 아직 초기 단계라 할 수 있다. 따라서 현장 용접을 지양하고 공장 제작하여 현장에서 조립하며, 프로젝트 별로 상이한 노드를 사용하는 것이 아닌 다양한 요구를 효과적으로 수용하는 구조 효율성을 향상시킨 노드 상세의 개발이 이루어져야 할 것이다.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.32-51
• /
• 2021

Architectural evidence of Gaya is insignificant than any other area. In this situation, house-shaped earthenware is particularly helpful in the study of Gaya architecture. However, house-shaped earthenware is not a building, it has just the shape of buildings. So, we have to find out architectural evidence from that. In this paper, I tried to estimate the architectural characteristics of Gaya through house-shaped earthenware in detail. I also consulted historical records, archeological results, and other scholars' papers. The results are as follows. First, house-shaped earthenware can be classified into three types according to its shape, and each type has distinct architectural structural characteristics. Second, house-shaped earthenware generally has a gambrel roof, and the characteristic of architectural design with the gable side of the gambrel roof as a front is the biggest feature of Gaya architecture. Third, various types of buildings existed according to their functions in Gaya architecture, and house-shaped earthenware was showed buildings of ancient storage, pens, and residences, which are symbols of the richness among various types of buildings.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.378-386
• /
• 2018

The present paper suggests the original form of the bell pavilion for the King Song-Dok bell which is one of the precious national treasure of Korea. In order to this, many literatures were reviewed including both historical and acoustical references. As the results, the model of the bell pavilion for the King Song-Dok bell is suggested as follows considering acoustical characteristics of the King Song-Dok bell and the traditional Korean bells ; 1) The bell pavilion has the rumbling puddle beneath the bell on the ground floor for resonance of sound 2) Many lumbers are used for columns and beams rather than boards since natural frequencies of the bell are 64 Hz and 168 Hz so that the sound absorption of the low frequency sound may not be occurred. 3) Only some boards may be used for the area between upper and middle molding of lintel in order to prevent of direct sunlight and sea breeze since this type of structure were used for bell pavilion of the same age. 4) Square form with the odd number of 3 or 5 Kans is adopted for bell pavilion considering the weight and the size of the bell which had been used traditionally 5) Finally, half-hipped structure is used for the roof of the bell pavilion which was the predominant form of the age.

• Journal of architectural history
• /
• v.14 no.3 s.43
• /
• pp.103-118
• /
• 2005

This study is about the meaning of wooden brackets that are distinctive elements of wooden architecture in Korea, Japan, and China. Existing studies about wooden brackets have been limited to the boundary of formalism, so the object of this study is to make a breakthrough in the field of those studies. The Wooden brackets in this study are considered to be decorative elements, and the principles of their design are examined. The specific subject of the study is wooden architecture with Jusimpo-styled brackets that have brackets only on pillars. The definition of Jusimpo is reexamined first, and ChulMok-Ikkong which has not been regarded as a Jusimpo-styled wooden bracket is interpreted as Jusimpo-styled one in this study. Categorized into three types, Jusimpo is examined how it is expressed according to the type of the roof in a building. In view of the results, the wooden bracket system is an effective technique to express the formality, and two designing principles can be seen in Jusimpo; one that wooden brackets observed externally are standardized and regarded as the same ones, and the other that the style of wooden brackets used in the most formal building is Yi-ChulMok. These designing principles mean that the carpenter who was in charge of building the architecture had certain principles when expressing wooden brackets as well as the roofs according to the class of the architecture. In addition, although the styles of wooden brackets that were used in the most formal architecture during the Chosun period were mostly Dapo, Jusimpo in the form of Yi-ChulMok was also adopted in some temples depending on their scale, and that means Jusimpo-styled wooden brackets were never considered to be inferior to Dapo-styled ones. And this point leaves the argument that the reexamination of Jusimpo-styled wooden brackets which have been regarded as the style used in the attached building or small structures since the Choun dynasty should be conducted.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2012

Recent spatial information technology has brought innovative improvement in both efficiency and accuracy. Especially, airborne LiDAR system(ALS) is one of the practical sensors to obtain 3D spatial information. Constructing reliable 3D spatial data infrastructure is world wide issue and most of the significant tasks involved with modeling manmade objects. This study aims to create a test data set for developing automatic building modeling methods by simulating point cloud data. The data simulates various roof types including gable, pyramid, dome, and combined polyhedron shapes. In this study, a robust bottom-up method to segment surface patches was proposed for generating building models automatically by determining model key points of the objects. The results show that building roofs composed of the segmented patches could be modeled by appropriate mathematical functions and the model key points. Thus, 3D digitizing man made objects could be automated for digital mapping purpose.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.353-362
• /
• 2012

3D building modeling from airborne Lidar without model regularization may cause positional errors or topological inconsistency in building models. Regularization of 3D building models, on the other hand, restricts the types of models which can be reconstructed. To resolve these issues, this paper modelled 3D buildings from airborne Lidar by building model regularization which considers more various types of buildings. Building points are first segmented into roof planes by clustering in feature space and segmentation in object space. Then, 3D building models are reconstructed by consecutive adjustment of planes, lines, and points to satisfy parallelism, symmetry, and consistency between model components. The experimental results demonstrated that the method could make more various types of 3d building models with regularity. The effects of regularization on the positional accuracies of models were also analyzed quantitatively.