• Journal of Bio-Environment Control
• /
• v.4 no.1
• /
• pp.32-42
• /
• 1995

Cultivation using rain shelter is very popular in summer because rain shelter has a simple structure using less materials than any other regular greenhouse. Although it has a main advantage of easy construction in terms of labour, time and cost, it has some disadvantage of poor ventilation and rain fall inflow. Therefore, the rain shelters being able to overcome the problems, to some extent, are necessary to propagate for practical purpose. Three characteristic types of rain shelter were analyzed using measured and simulated environment data. Type 1 was a conventional type with an arched roof, and Type 2 and Type 3 were improved ones which were designed to have three arched roofs and three sawtooth like roofs with the openings for ventilation, respectively. The distribution of inside temperature measured was relatively uniform in Type 2 and 3 by the natural ventilation through the openings of the roof compared to Type 1 which had no openings. The relative light transmittance measured in Type 2 and 3 showed lower than that in Type 1, which suppressed the rise of inside temperature, For more accurate comparison, the differences between inside and outside temperatures to various wind speeds were calculated by the model. The difference in Type 1 was the greatest at lower wind speed below 1 ㎧, that is, the highest in inside temperature, but decreased rapidly as wind speed increased above 1 ㎧. Measured temperatures generally showed the same trends as calculated ones by the model. As a whole, the improved rain shelters(Type 2 and 3) showed better performance than the conventional one in ventilation as well as inside temperature.

• The Microorganisms and Industry
• /
• v.14 no.3
• /
• pp.41-46
• /
• 1988

극한환경을 구성하는 중요한 환경인자는 온도, 수소이온농도, 염도, 압력, 물, 영양물질 등이 있는데 본 총설에서는 그동안 비교적 많이 다루어지지 않았던 알칼리성환경, 건조환경, 저영양환경, 심해환경과 같은 극한환경과 아울러 특수환경인 해양환경, 지하환경 등으로 나누어 설명했다. 고염환경과 고영양환경, 혐기성환경은 다른 저자에 의해 자세히 다루어지고 고온환경, 산성환경, 극지환경 등은 지면상 이유로 제외했다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.7-7
• /
• 2015

가뭄 및 홍수 등 재해를 방지하고 효율적인 물 관리를 위해서는 지표와 대기 사이에 이루어지는 수문기상 요소의 정량화가 필요하다. 수문기상요소는 관측을 통해 파악하는 것이 가장 정확하지만 광범위한 지역에 대한 관측은 한계가 있으므로 일반적으로 지면모델(Land Surface Model)을 많이 이용한다. 본 연구에서 Noah LSM(Noah Land Surface Model)과 TOPLATS(TOPmodel based Land-Atmosphere Transfer Scheme) 및 DHSVM(Distributed Hydrology Soil Vegetation Model)의 세 모델을 활용하여 안동댐 유역의 수문기상정보를 산출하고 관측자료와 검증함으로 각 모델의 특성을 분석하자 한다. 본 연구에서 사용된 관측자료는 국립기상과학원에서 운영중인 안동댐 유역 플럭스타워의(A6, A7) 지표근처 기상장과 에너지 요소이다. '13년 10월부터 '14년 11월까지 기간에 대해 각 지점에서 관측된 현열 및 잠열 플럭스의 품질관리를 수행하였으며, 이 자료를 본 연구의 검증자료로 활용하였다. 각 모델을 강제하기 위한 지표근처 기상자료는 두 지점에서 관측된 기온, 풍향 풍속, 상대습도, 강수, 지중온도 및 장 단파 복사량이며, 각 모델에서 산출된 잠열 및 현열 플럭스, 토양수분과 증발산량을 관측값과 비교 검증하였다. 본 연구결과는 한국수자원학회 학술발표회를 통하여 소개될 예정이며, 향후 멀티모델 앙상블 시스템 구축에 기초자료로 활용될 것으로 기대된다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2010

The purpose of the study was to evaluate the influence of landscaping pavements on WBGT(Wet-Bulb Globe Temperature) of outdoor spaces that lack ventilation and shade at summer midday. The relative humidity(RH), dry-bulb temperature(DT) and globe temperature(GT) were recorded every minute from June to October 2009 at a height of 1.2m above ten experimental beds with different pavements, by a measuring system consisting of an electric humidity sensor(GHM-15), resistance temperature detector(RTD, Pt-100), standard black globe(${\phi} 150mm$) and data acquisition systems(National Instrument's Labview and Compact FieldPoint). Additionally, the surface dry-bulb temperatures also were recorded and compared. The area of each experimental bed was 1.5m(W)${\times}$2.0m(L) and ten different kinds of pavement were used including grass, grass+cubic stone, grass+porous brick, brick, stone panels, cubic stone, interlocking blocks, clay brick, naked soil, gravel and concrete. To prevent interference from ventilation, a 1.5m height cubic steel frame was established around each bed and each vertical side of the frame was covered with transparent polyethylene film. Based on the records of the hottest period from noon to 3 PM on 26 days with a peak dry-bulb temperature over $30^{\circ}C$ at natural condition, the wet-bulb temperature(WT) and WBGT were calculated and compared. The major findings were as follows: 1. The average surface DT was $40.1^{\circ}C$, which is $9^{\circ}C$ higher than that of the natural condition. The surface DT of the pavements with grass were higher than those of concrete and interlocking block. The peak DT of the surface almost every pavement rose to above $50^{\circ}C$ during the hottest time. 2. The averages of DT, WT and GT were $40.1^{\circ}C$, $27.5^{\circ}C$ and $49.1^{\circ}C$, and the peak values rose to $48.1^{\circ}C$, $45.8^{\circ}C$ and $59.5^{\circ}C$, respectively. In spite of slight differences that resulted according to pavements, no coherent differentiating factor could be found. 3. The average WBGT of grass was the highest at $34.3^{\circ}C$ while the others were similar in the range of around $33{\pm}1^{\circ}C$. Meanwhile, the peak WBGT was highest with stone panel at $47.9^{\circ}C$. Though there were some differences according to pavements, and while grass seemed to be worst in terms of WBGT, it seems difficult to say ablolutely that grass was the worst because the measurement was conducted without ventilation and shade during summer daytime hours only, which had temperatures that rose to a dangerous degree(above $45^{\circ}C$ WBGT), withering the grass during the hottest period. The average WBGT resulted also showed that the thermal environment of the pavement without ventilation and shade were at an intolerable level for humans regardless of the pavement type. In summary, the results of this study show that ventilation and shade are more important factor than pavement type in terms of outdoor thermal comfort in summer daylight hours.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.434-442
• /
• 2015

The process of cultivation and production of oak mushroom (Lentinula edodes (Berk.) Pegler) on sawdust surface beds were investigated. Sawdust surface bed cultivation is the method by which oak mushrooms are cultured and produced on sterilized sawdust surface bed without using bags. The bed was made by inoculating with 3 to 1 ratio of bed sawdust to oak mushroom mycelial inoculum. The sawdust bed medium with 65% water content was pasteurized at $65^{\circ}C$, inoculated with sawdust spawn and spread on the surface on vinyl film in cultivation shed. During 78 days of cultivation period, water content in the medium varied from 61 to 72%, its pH decreased from 5.6 to 3.9~4.6 and ergosterol concentration increased to $0.33{\sim}0.59{\mu}g/g$. $CO_2$ concentration in the medium rapidly increased to 8.06% in two weeks. In seven weeks the medium surface started browning and $CO_2$ concentration increased to about 5.63%. Until 11th week the $CO_2$ concentration was maintained at 6~7%. After removing the plastic cover on the bed for ventilation in 12 weeks, $CO_2$ within the bed reduced dramatically to 1.5%. In the cultivation shed the internal temperature was $7.1{\sim}29^{\circ}C$ and humidity was 27.3 to 100%, while bed temperature ranged $11.6{\sim}30^{\circ}C$. Oak mushroom fruiting started from late July, in 120 days after bed establishment in late March and continued for approximately 100 days until early December with eight cycles of irrigation treatment. The mushroom yield of the eight cycles were 288~352 kg during the 1st (7/29~8/4) to 3rd cycle (9/3~9/7), 800 kg at the 4th cycle (9/19~9/24), 1,296~1,853 kg during 5th (10/3~10/8) to 7th cycle (4.11~11/9) and 990 kg at 8th cycle (11/23~12/7). Total production was approximately 7.4 tons from 33.0 tons of oak sawdust medium, thus harvest efficiency of the mushroom production was approximately 22.4%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.99-102
• /
• 2012

지표면 온도는 토지피복의 상태, 식생의 분포 상태, 토양수분, 증발산 등의 영향으로 많은 차이를 가지게 되며, 지면-대기의 상호순환의 중요한 인자로써 기후모델 및 농업 등의 기본적인 데이터로 사용되고 있다. 이러한 지표면의 온도를 정확하게 파악하는 것은 수문학적 관점 및 기상적인 관점에서 매우 중요하다. 기존에 LST (Land Surface Temperature, 지표면온도), ET (EvapoTranspiration, 증발산), NDVI (Normalized Difference Vegetation Index, 정규식생지수) 등의 검증이 많이 이루어진 MODIS위성의 Terra/Aqua센서는 한반도를 스캔하고 지나갈 때의 순간적인 데이터를 산출된다. 공간적인 면에서는 많은 이점이 있으나 시간적인 면에서는 시간에 따른 인자들의 변동성을 파악 하는데는 많은 문제가 있다. 그렇기 때문에 시 공간적으로 변화양상을 측정 할 수 있는 정지궤도위성의 중요성이 대두되고 있다. 본 연구에서는 국내에서 2010년 6월 27일 발사된 정지궤도위성인 천리안의 데이터를 활용하였다. 천리안 위성은 기상 센서와 해양관측 센서 그리고 통신센서를 가진 위성이다. 천리안 위성의 기상 센서는 MTSAT-1 위성과 같은 적외선 센서를 탑재하고 있으며, 평시에는 15분 단위의 데이터를 산출하게 된다. 천리안에서 제공되는 많은 Product(강우강도, 해수면온도, 가강수량, 지구방출복사 등)는 수자원 및 기상에 관련된 데이터가 제공된다. 하지만 아직 검증이 많이 이루어지지 못하였다. 그래서 천리안 위성 데이터인 지표면 온도자료를 이용하여 천리안 위성의 효율성에 대해서 알아보고자 하며, 기존의 검증이 많이 이루어진 MODIS의 데이터와의 상관성을 분석하고 지상과의 관계를 검증 및 비교하여 천리안 위성의 활용성에 대해서 알아보려고 한다.

• Korean Journal of Remote Sensing
• /
• v.25 no.2
• /
• pp.193-203
• /
• 2009

Snow cover is one of the important parameters since it determines surface energy balance and its variation. To classify snow and cloud from satellite data is very important process when inferring land surface information. Generally, misclassified cloud and snow pixel can lead directly to error factor for retrieval of surface products from satellite data. Therefore, in this study, we perform algorithm for detecting snow cover area with remote sensing data. We just utilize visible reflectance, and infrared channels rather than using NDSI (Normalized Difference Snow Index) which is one of optimized methods to detect snow cover. Because COMS MI (Meteorological Imager) channels doesn't include near infra-red, which is used to produce NDSI. Detecting snow cover with visible channel is well performed over clear sky area, but it is difficult to discriminate snow cover from mixed cloudy pixels. To improve those detecting abilities, brightness temperature difference (BTD) between 11 and 3.7 is used for snow detection. BTD method shows improved results than using only visible channel.

• Korean Journal of Microbiology
• /
• v.51 no.3
• /
• pp.221-230
• /
• 2015

Ground bed cultivation method for shiitake mushroom (Phogo; Lentinula edodes) has been advanced to use the oak-sawdust composted by microorganisms. This method has some advantages in saving the labors and improving productivity. The aim of this study is to analyze microbial community in oak sawdust and to provide the information for efficient cultivation of shiitake mushroom. In process of composting, the proportions of thermophiles increased from 10% to 80%. This results show the microbial community succession from mesophilic bacteria to thermophilic bacteria. T-RFLP analysis and nucleotide sequencing of 16S rRNA gene demonstrated that the change of dominant bacteria coupled with shifts in each stages. The family of Enterobacteriaceae as a mesophilic bacteria were dominant (100%) in oak sawdust sample, but Amycolatopsis (49.0%) and Saccharopolyspora (26.5%) as a thermophilic Actinomycetes were dominant in the last day of composting. In hyphal growth stage, Leuconostoc (psychrophilic bacteria) was dominant (75.0%). The composting process of sawdust is very important for growth of mushroom mycelium. Therefore, there is need for the further study for the Amycolatopsis as thermophilic Actinomycetes.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.481-494
• /
• 2018

The accurate radiative transfer model simulation is essential for an accurate ozone profile retrieval using optimal estimation from backscattered ultraviolet (BUV) measurement. The input parameters of the radiative transfer model are the main factors that determine the model accuracy. In particular, meteorological parameters such as temperature and surface pressure have a direct effect on simulating radiation spectrum as a component for calculating ozone absorption cross section and Rayleigh scattering. Hence, a sensitivity of UV ozone profile retrievals to these parameters has been investigated using radiative transfer model. The surface pressure shows an average error within 100 hPa in the daily / monthly climatological data based on the numerical weather prediction model, and the calculated ozone retrieval error is less than 0.2 DU for each layer. On the other hand, the temperature shows an error of 1-7K depending on the observation station and altitude for the same daily / monthly climatological data, and the calculated ozone retrieval error is about 4 DU for each layer. These results can help to understand the obtained vertical ozone information from satellite. In addition, they are expected to be used effectively in selecting the meteorological input data and establishing the system design direction in the process of applying the algorithm to satellite operation.

• Journal of KSNVE
• /
• v.3 no.3
• /
• pp.192-198
• /
• 1993

옥외에서 발생하는 소음은 음원과 수음점 사이의 시선을 차단하는 장애물을 설치하는 방법이외에는 달리 방도가 없는 경우가 많다. 빛과 마찬가지로 소리도 시선이 차단되면 소리의 그늘이 지는데 빛의 경우보다는 상당히 강한 음장이 이 그늘에 존재한다. 그늘 영역에서의 음장은 소리의 회절현상에 기인하는 것으로서 회절음장은 곧 방음벽의 차음효과를 좌우한다. 방음벽의 차음효과는 잉여감쇠(excessive attenuation)로 표시되는데 잉여감쇠에 영향을 주는 인자는 방음벽의 기하학적 조건, 음향학적 성질, 설치지면, 주변지형, 풍속 및 온도분포와 같은 기상조건, 음원의 특성 등 다양하지만 가장 기본적인 인자는 기하학적인 조건이다. 본고는 방음벽의 원리에 국한하여 살펴보기 위해 기술된 것이므로 주로 판 또는 쐐기 형태의 물체에 의한 회절현상을 취급하였다.