• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.55-60
• /
• 2005

In this study, vibration control of the enclosed plate which is typical two dimensional structure are performed by using intelligent control method and piezo ceramic as an actuator attached at the plate. The characteristics of the plate with piezo ceramic are examined to identify the natural frequencies. Then, the plate is controlled under the sinusoidal excitation by acoustic source and the reduction level of vibration is examined via frequency response and time sequence. The control result shows the effect of the intelligent control method as a control scheme compared with that of the previous filtered-X LMS algorithm.

• 한국지능시스템학회논문지
• /
• 제20권3호
• /
• pp.326-331
• /
• 2010

본 논문에서는 제조 장비를 위한 다채널 다중신호 데이터 획득 시스템의 설계와 구현에 대해 다룬다. 제안된 시스템은 800 채널의 아날로그 신호를 처리 할 수 있으며, 알테라 쿼터스 툴을 활용하여 Cyclone II FPGA로 구현되었다. 구현된 시스템은 공작기계와 같은 제어장치의 대규모 입출력 라인들의 올바른 동작여부를 판정하는데 적합하다. 그 시스템은 데이터 처리량을 줄일 수 있는 제어부, 전압분배회로 및 USB 인터페이스로 구성된다. 데이터 처리량을 줄이기 위하여 획득한 데이터를 비교 분석하여 동일한 데이터를 분리해내고 변화가 있는 데이터만을 전송하는 방법의 알고리즘을 적용하였다. 제조장비에 적용된 시험결과는 짧은 시간 내에 800개의 아날로그 입력 신호들을 획득 처리한 후 적절히 전송함을 보여준다.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.99-106
• /
• 2006

In this paper, the new method that estimates a sensing ability of smart sensor will be proposed. A study is estimation method that evaluates sensing ability about smart sensor respectively. According to acceleration(g) and displacement changing, we estimated sensing ability of smart sensor using SAI(Sensing Ability Index) method respectively. Smart sensors was made fer experiment. The types of smart sensor are two types(hard and soft smart sensor). Smart sensors developed for recognition of material. Experiment and analysis are executed for estimate the SAI method. In develop a smart sensor, the SAI method will be useful for finding optical design condition of smart sensor that can sense a material. And then dynamic characteristics of smart sensors(frequency changing, acceleration changing, critical point, etc.) are evaluated respectively through new method(SAI) that use the power spectrum density. Dynamic characteristic of sensor is evaluated with SAI method relatively. We can use the SAI for finding critical point of smart sensor, too.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.73-81
• /
• 2006

This paper describes our primary study for a new method of recognizing materials, which is need for precision work system. This is a study of dynamic characteristics of smart sensors, new method$(R_{SAI})$ has the sensing ability of distinguishing materials. Experiment and analysis are executed for finding the proper dynamic sensing condition. First, we developed advanced smart sensor. We made smart sensors for experiment. The type of smart sensor is HH type. The smart sensor was developed for recognition of material. Second, we develop new estimation methods that have a sensing ability of distinguish materials. Dynamic characteristics of sensor are evaluated through new recognition index$(R_{SAI})$ that ratio of sensing ability index. Distinguish of object is executed with $R_{SAI}$ method relatively. We can use the $R_{SAI}$ method for finding materials. Applications of this method are finding abnormal condition of object (auto-manufacturing), feeling of object(medical product), robotics, safety diagnosis of structure, etc.

• 한국지능시스템학회논문지
• /
• 제7권5호
• /
• pp.1-7
• /
• 1997

CNC공작기계의 두 서보축을 대상으로 가공 정밀도를 향상시키기 위한 신경망 윤과제어 알고리즘을 제안한다. 이 연구에서는 두 축 상호간에 미치는 영향을 신경망의 학습 능력을 이용하여 보상하고자 한다. 윤곽제어를 위해서는 매 샘플링 주기마다 윤곽오차를 계산하여하나, 윤곽오차는 직선경로를 이동하는 경우 쉽게 계산가능하나 원호, 인볼루트곡선등 비선형 경로를 가공하는 경우에는 정확하게 계산하기 힘들다. 먼저 이 논문에서는 임의의 비선형 곡선경로에 대하여도 윤곽오차를 정확히 구해낼 수 있는 새로운 윤곽오차 모델링 방법을 제안다. 또한 이러한 윤곽오차에 대한 항을 포함하는 성능지수를 정의하고, 신경망 윤곽제어를 위한 온라인 학습법칙을 유도한다. 이러한 신경망윤곽제어기의 사용으로 시스템이 비선형 특성을 가지거나 외부 환경이 변화하는 경우에도 좋은 윤곽제어 성능을 유지할 수 있다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.381-386
• /
• 2002

In this paper, we have proposed a new approach to the design of robot vision system to develop the technology for the automatic test and assembling of precision mechanical and electronic parts for the factory automation. In order to perform real time implementation of the automatic assembling tasks in the complex processes, we have developed an intelligent control algorithm based-on neural networks control theory to enhance the precise motion control. Implementing of the automatic test tasks has been performed by the real-time vision algorithm based-on TMS320C31 DSPs. It distinguishes correctly the difference between the acceptable and unacceptable defective item through pattern recognition of parts by the developed vision algorithm. Finally, the performance of proposed robot vision system has been illustrated by experiment for the similar model of fifth cell among the twelve cell for automatic test and assembling in S company.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.247-252
• /
• 2004

Developed shape awareness technology and vision technology for optical ten slant in this research and including external form state of lens for the performance verification developed so that can be good achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data md standard reflex data mutually. Developed system to smallest 1pixel unit though measuring is possible 1pixel as 3.7$\mu\textrm{m}$${\times}$3.7$\mu\textrm{m}$(0.1369${\times}$10/sub-1/$\textrm{mm}^2$) the accuracy to 10/sub-1/mm minutely measuring is possible performance verification and trust ability through an experiment prove.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.62-67
• /
• 2002

This paper presents a new approach to the design of cruise control system of a mobile robot with two drive wheel. The proposed control scheme uses a Gaussian function as a unit function in the fuzzy-neural network and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized loaming architecture. It is Proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is shown by performing the computer simulation for trajectory tucking of the speed and azimuth of a mobile robot driven by two independent wheels.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.32-37
• /
• 2005

Several types of smart materials and control scheme are available to adjust the structure actively in various external disturbances. A control scheme was introduced for a specific material. But the effectiveness of the control scheme has some limitation according to the choice of the smart materials and the response of the structure. The ER(Electrorheological) fluid is adequate for a large control force, and the PZT(lead zirconate titanate) patches are suitable for small but arbitrary control force at any point of the structure. It can be used for active control of structure by changing the dynamic characteristics of the structure. But it has some difficulty in suppressing the excited vibration in broad band. To compensate this resonance of the controlled structure, a hybrid controller was constructed using PPF(Positive position feedback) control with PZT and ER fluid control.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.29-36
• /
• 2006

The hydraulic excavators are mainly applied for excavating, public works, quarrying, etc. In some of the construction site, however, they are used for crane works of relatively light materials, although the crane works by the hydraulic excavators are forbidden by law due to the safety reasons. The major construction equipment companies in forward countries have been developing the new systems, e.g. crane works by the hydraulic excavators, and they are working in the construction site. Therefore, the new system of crane works by the hydraulic excavators should be developed for the domestic construction site in order to prevent the accident. In this paper, the fundamental study and experiment are accomplished for the crane system application on the hydraulic excavators.