• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.4
• /
• pp.55-60
• /
• 2005

In this study, vibration control of the enclosed plate which is typical two dimensional structure are performed by using intelligent control method and piezo ceramic as an actuator attached at the plate. The characteristics of the plate with piezo ceramic are examined to identify the natural frequencies. Then, the plate is controlled under the sinusoidal excitation by acoustic source and the reduction level of vibration is examined via frequency response and time sequence. The control result shows the effect of the intelligent control method as a control scheme compared with that of the previous filtered-X LMS algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.326-331
• /
• 2010

This paper presents the design and implementation of a data acquisition system with a large number of multi-channels for manufacturing machine. The system having a throughput of 800-ch analog signals has been designed with Quartus II tool and Cyclone II FPGA. The proposed system is suitable for the large scale data handling in order to distinguish whether the operation is correct or not. The designed system is composed of a control unit, voltage divider and USB interface. To reduce the data throughput, we utilized an algorithm which can extract the same data from the achieved data. The test results of the system adapted to a manufacturing machine, show a relevant data acquisition operation of 800 channels in short time.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.2
• /
• pp.99-106
• /
• 2006

In this paper, the new method that estimates a sensing ability of smart sensor will be proposed. A study is estimation method that evaluates sensing ability about smart sensor respectively. According to acceleration(g) and displacement changing, we estimated sensing ability of smart sensor using SAI(Sensing Ability Index) method respectively. Smart sensors was made fer experiment. The types of smart sensor are two types(hard and soft smart sensor). Smart sensors developed for recognition of material. Experiment and analysis are executed for estimate the SAI method. In develop a smart sensor, the SAI method will be useful for finding optical design condition of smart sensor that can sense a material. And then dynamic characteristics of smart sensors(frequency changing, acceleration changing, critical point, etc.) are evaluated respectively through new method(SAI) that use the power spectrum density. Dynamic characteristic of sensor is evaluated with SAI method relatively. We can use the SAI for finding critical point of smart sensor, too.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.73-81
• /
• 2006

This paper describes our primary study for a new method of recognizing materials, which is need for precision work system. This is a study of dynamic characteristics of smart sensors, new method$(R_{SAI})$ has the sensing ability of distinguishing materials. Experiment and analysis are executed for finding the proper dynamic sensing condition. First, we developed advanced smart sensor. We made smart sensors for experiment. The type of smart sensor is HH type. The smart sensor was developed for recognition of material. Second, we develop new estimation methods that have a sensing ability of distinguish materials. Dynamic characteristics of sensor are evaluated through new recognition index$(R_{SAI})$ that ratio of sensing ability index. Distinguish of object is executed with $R_{SAI}$ method relatively. We can use the $R_{SAI}$ method for finding materials. Applications of this method are finding abnormal condition of object (auto-manufacturing), feeling of object(medical product), robotics, safety diagnosis of structure, etc.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.5
• /
• pp.1-7
• /
• 1997

In this paper, a neuro-contouring control scheme for the high precision machining of CNC machine tools is descrihed. The proposed control system consists of a conventional controller for each axis and an additional neuro-controller. For contouring control, the contour error must be computed during realtime motion, but generally the contour error for nonlinear contours is difficult to he directly computed. We, therefore, propose a new contour error model to approximate real error more exactly, and here we also introduce a cost function for better contouring performance and derive a learning law to adjust the weights of the neuro-controller. The derived learning law guarantees good contouring performance. Usefulness of the proposed control scheme is demonstrated hy computer simulations.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.381-386
• /
• 2002

In this paper, we have proposed a new approach to the design of robot vision system to develop the technology for the automatic test and assembling of precision mechanical and electronic parts for the factory automation. In order to perform real time implementation of the automatic assembling tasks in the complex processes, we have developed an intelligent control algorithm based-on neural networks control theory to enhance the precise motion control. Implementing of the automatic test tasks has been performed by the real-time vision algorithm based-on TMS320C31 DSPs. It distinguishes correctly the difference between the acceptable and unacceptable defective item through pattern recognition of parts by the developed vision algorithm. Finally, the performance of proposed robot vision system has been illustrated by experiment for the similar model of fifth cell among the twelve cell for automatic test and assembling in S company.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.247-252
• /
• 2004

Developed shape awareness technology and vision technology for optical ten slant in this research and including external form state of lens for the performance verification developed so that can be good achieve badness finding. And, establish to existing reflex data because inputting surface badness degree of scratch's standard specification condition directly, and error designed to distinguish from product more than schedule error to badness product by normalcy product within schedule extent after calculate the error comparing actuality measurement reflex data md standard reflex data mutually. Developed system to smallest 1pixel unit though measuring is possible 1pixel as 3.7$\mu\textrm{m}$${\times}$3.7$\mu\textrm{m}$(0.1369${\times}$10/sub-1/$\textrm{mm}^2$) the accuracy to 10/sub-1/mm minutely measuring is possible performance verification and trust ability through an experiment prove.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.4
• /
• pp.62-67
• /
• 2002

This paper presents a new approach to the design of cruise control system of a mobile robot with two drive wheel. The proposed control scheme uses a Gaussian function as a unit function in the fuzzy-neural network and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized loaming architecture. It is Proposed a learning controller consisting of two neural network-fuzzy based on independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The performance of the proposed controller is shown by performing the computer simulation for trajectory tucking of the speed and azimuth of a mobile robot driven by two independent wheels.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.32-37
• /
• 2005

Several types of smart materials and control scheme are available to adjust the structure actively in various external disturbances. A control scheme was introduced for a specific material. But the effectiveness of the control scheme has some limitation according to the choice of the smart materials and the response of the structure. The ER(Electrorheological) fluid is adequate for a large control force, and the PZT(lead zirconate titanate) patches are suitable for small but arbitrary control force at any point of the structure. It can be used for active control of structure by changing the dynamic characteristics of the structure. But it has some difficulty in suppressing the excited vibration in broad band. To compensate this resonance of the controlled structure, a hybrid controller was constructed using PPF(Positive position feedback) control with PZT and ER fluid control.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.29-36
• /
• 2006

The hydraulic excavators are mainly applied for excavating, public works, quarrying, etc. In some of the construction site, however, they are used for crane works of relatively light materials, although the crane works by the hydraulic excavators are forbidden by law due to the safety reasons. The major construction equipment companies in forward countries have been developing the new systems, e.g. crane works by the hydraulic excavators, and they are working in the construction site. Therefore, the new system of crane works by the hydraulic excavators should be developed for the domestic construction site in order to prevent the accident. In this paper, the fundamental study and experiment are accomplished for the crane system application on the hydraulic excavators.