• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1187-1188
• /
• 2007

Most of the surveillance systems are based on CCTV, closed circuit Television. A surveillance system for urban transit is also based on CCTV. Urban transit operation corporations have a CCTV system and a lot of cameras to monitor the situation for the passengers, and the important facilities. But this system has some problems that it cannot respond to a state of emergency immediately. In this paper, we describe a configuration of an intelligent surveillance system for urban transit to solve that problems. Our proposed configuration include a camera with some intelligent module, and a processor to integrate various data from not only cameras, but also sensors such as a temperature sensor, a heat sensor, sound sensor and etc. and some other data generator. This system configuration can decide the state of the passengers and the facilities. The surveillance system with this configuration can available with the existing surveillance system without a considerable improvement.

• Annual Conference of KIPS
• /
• 2015.10a
• /
• pp.1330-1332
• /
• 2015

최근 지능형 감시 시스템에서 비정상 행동들을 자동으로 감지하는 연구가 활발히 진행되고 있다. 그러나 해결하기 힘든 몇 가지 이슈들이 있는데, 주어진 입력 영상에서 군중들이 중첩될 때 각각의 객체를 인식하는데 어려움이 있다는 점과 비정상 행동을 나타내는 훈련 데이터셋이 제한적이라는 점이다. 이러한 문제들을 해결하기 위해 우리는 군중 영상에서 비정상 행동들을 인식하는 새로운 프레임워크를 제안한다. 제안된 방법은 크게 특징추출모듈과 추출된 특징들을 이용한 행동인식모듈로 구성된다. 중첩문제를 해결하기 위해 움직임 에너지와 고정 에너지를 특성으로 정의하였고 위에 언급한 특징추출모듈에서 두 에너지 값을 계산한다. 그리고 정상/비정상 행동들은 HMM과 최적의 임계값을 도출하는 알고리즘을 사용하는 행동인식모듈에 의해 분류된다. 우리가 제안한 방법은 인공 데이터셋과 실제 비디오 영상 데이터셋을 이용한 실험에 의해 증명한다.

• Journal of Internet of Things and Convergence
• /
• v.5 no.2
• /
• pp.73-79
• /
• 2019

Research is underway on services and systems that provide real-time alerts for suffocating gases and potentially explosive materials, but currently smart bend type services are lacking. This study supports real-time identification of explosion hazards due to static electricity in the workplace and immediate elimination of accident occurrence factors, real-time monitoring of worker status and workplace hazards (oxygen, hazardous chemical concentration), and immediate warning and data in case of danger. We propose a method of establishing an accident prevention system through analysis. In this way, various accidents that may occur in industrial sites are monitored using IoT-based intelligent sensor nodes, wireless network technology, data processing middleware, and integrated control system, and real-time risk information at the industrial sites is prevented and accidents are prevented. By supporting a safe working environment, the company can significantly reduce costs compared to post-procurement costs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2203-2208
• /
• 2011

In this paper, we describe application service development for secure land and marine transport based on CSD (Conveyance Security Device) systems. Based on CSD systems, we present application service and security service according to relevant standards as well as test procedure of developed services. Exploiting temperature, moisture, impact sensors, state monitoring function of container freight was developed to prevent disaster during transportation in addition to security function with CSD. For confidentiality of messages exchanged among application service entity and CSD systems, Encryption and decryption functions going by RC5 and AES-128 algorithms were implemented at desktop PC and 8 bit CPU environments, respectively. Measuring the elapsed time during encryption and decryption shows that two algorithms are allowable for the application service.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.589-596
• /
• 2013

With the increase of social crime rate, the interest on the intelligent security system is also growing. This paper proposes a detection system of monitoring whether abnormal behavior is being carried in the images captured using CCTV. After detection of an object via subtraction from background image and morpholgy, this system extracts an abnormal behavior by each object's feature information and its trajectory. When an object is loitering for a while in CCTV images, this system considers the loitering as an abnormal behavior and sends the alarm signal to the control center to facilitate prevention in advance. Especially, this research aims at detecting a loitoring act among various abnormal behaviors and also extends to the detection whether an incoming object is identical to one of inactive objects out of image.

• Journal of radiological science and technology
• /
• v.33 no.1
• /
• pp.51-59
• /
• 2010

We developed an analysis software that automatically detects incoming isotopes for multi-purpose gamma-ray detectors. The software is divided into three major parts; Network Interface Module (NIM), Spectrum Analysis Module (SAM), and Graphic User Interface Module (GUIM). The main part is SAM that extracts peak information of energy spectrum from the collected data through network and identifies the isotopes by comparing the peaks with pre-calibrated libraries. The proposed peak detection algorithm was utilized to construct libraries of standard isotopes with two peaks and to identify the unknown isotope with the constructed libraries. We tested the software by using GammaPro1410 detector developed by NuCare Medical Systems. The results showed that NIM performed 200K counts per seconds and the most isotopes tested were correctly recognized within 1% error range when only a single unknown isotope was used for detection test. The software is expected to be used for radiation monitoring in various applications such as hospitals, power plants, and research facilities etc.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.2
• /
• pp.90-99
• /
• 2004

High speed info-communications equipment are required with development of highly information-oriented society, the intelligent industrial facilities and social systems such as administrative, financial and traffic systems, are gradually becoming to automation, which are composed of the integrated circuits and micro-semiconductors, remote control and operation. Thus modern micro-electronic circuits can frequently be damaged by lightning surge. The protection of electronic circuits from lightning overvoltages is concentrated very interesting. In this paper, for the purpose of providing the effective protection method of electronic devices such micro-computers from lightning surges in a residential building, the protection effect of surge protective devices according to types of system groundings were experimentally analyzed. Also the effective installation method of surge protective devices was examined and proposed. The installation of SPDs in retrofits was a high remnant voltage across the protected device owing to the inductance in the long wires to the SPDs. Finally the method of installing the SPD by twisted pain wires is remarkably effective for fast rising transient overvoltages.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.75-83
• /
• 2007

A model based approach of tracking the limbs of a walking human subject is proposed in this paper. The tracking process begins by building a data base composed of conditional probabilities of motions between the limbs of a walking subject. With a suitable amount of video footage from various human subjects included in the database, a probabilistic model characterizing the relationships between motions of limbs is developed. The motion tracking of a test subject begins with identifying and tracking limbs from the surveillance video image using the edge and silhouette detection methods. When occlusion occurs in any of the limbs being tracked, the approach uses the probabilistic motion model in conjunction with the minimum cost based edge and silhouette tracking model to determine the motion of the limb occluded in the image. The method has shown promising results of tracking occluded limbs in the validation tests.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.267-270
• /
• 2016

차량 인식 기술은 지능형 자율주행 차량 및 첨단 운전자 보조 시스템 (ADAS: Advanced Driver Assistance System)의 개발에 있어서 핵심 요소 기술이다. 영상 기반의 차량 검출 알고리즘은 일반적으로 가설 생성 (HG: Hypothesis Generation) 단계와 가설 검증 (HV: Hypothesis Verification) 단계로 구성된다. 가설 검증 단계는 관심 영역 (ROI: Region of Interest) 내에 차량이 존재할 가능성이 있는 후보 영역을 만드는 단계로서 전체 알고리즘의 복잡도와 성능에 영향을 미친다. 본 논문에서는 관심 영역 내에 존재하는 그림자와 차량으로 인한 에지를 검출하고 두 특징 정보를 결합한 가설 생성 방법을 제안하고 차량 후방 영상을 이용하여 사각지대를 감시하는 시스템에 제안 방법을 적용하는 실험을 수행하였다. 실험 결과로 제안 방법이 차량 후보 영역의 존재 여부와 위치 정보를 판단하기에 적합하며 이를 통해 차량 검출 알고리즘의 계산 복잡도를 개선하면서도 다음 단계인 가설 검증 시 검출 성능을 향상시킬 수 있음을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.139-144
• /
• 2000

This paper presents development of meander monitoring system base reliable detection at conveyer belt used for materials transport line of steel company. Conventional detection method is losed the confidence, because of the place with bad surroundings of measurement so much that materials production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed infrared meander detection system using the infrared sensor array and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.