• Conservation Science in Museum
• /
• v.29
• /
• pp.133-152
• /
• 2023

This study references preceding studies to examine the history of paint application techniques using various paints in the past, with the aim to contribute to the long-term preservation of large military cultural heritage assets situated outdoors. To this end, the study compared the findings of preceding research with the findings of an analysis conducted on a H-13 helicopter housed at the War Memorial of Korea. Upon collecting and analyzing samples from three grounded WWII aircraft from above-ground by preceding studies, it was confirmed from each sample that the various chemical properties of chrome ensured the effectiveness of the protective coating. The compound was first tested as a corrosion-inhibiting pigment in the early 1940s and proved its excellent moisture-resistant properties over the course of 80 years, despite the deterioration of the paint layer and long-term exposure to the natural environment. For this reason, it has been widely used as a corrosion inhibitor for aluminum alloys in the aviation industry. In other word, the most widely-used material for preventing corrosion was an organic primer containing chromate. In this study, based on the paint analysis of a H-13 helicopter operated in the Korean War, it was shown that the second layer, consisting of the primer, contains chromium oxide (Cr₂O₃). In addition, it was estimated that red lead tetraoxide (Pb₃O₄) was used for the vehicle. Analysis results and data from previous studies can help to confirm the continued effectiveness of corrosion prevention function provided by chromate. Meanwhile, the result of infrared spectroscopy analysis confirmed the use of alkyd resin. In the future, comparisons with a more diverse range of artifacts will allow the identification of changes in the manufacturing technology of paints used to protect alloys from corrosion.

• Journal of Aquaculture
• /
• v.11 no.4
• /
• pp.529-546
• /
• 1998

Gonadal part that developed by indifferentiation period for 6 months after hatching is made as gonad and fat body. These gonad are thin semi-transparant and undistinguished germ cell. Germinal epithelium is distinguished by development of gonad epithelial tissue from 7 months after hatching. Sex differentiation is begun by oogonia develoment at 8 months after hatching. Primary oocytes grow over germinal epithelium of gonadal cavity, at 9 months after hatching, gonadal cavity become ovarian cavity as they increasing. As soon as oocytes at 13 months after hatching are filled with the whole part of gonad, degeneration of oocyte is begun. And then, gonad has cavity tissue, a small number of oocyte are located in gonadal cavity. At 15 months after hatching, new primary oocyte develop and cavity of ovarian tissue in the central of ovarian cavity. Spermatogonia multiplicate and cavity tissue consist of testicular tissue. These gonad become hermaphrodite and then ditermine the sex of female and male. These results show the red sea bream is juvenile hermaphrodite and undif-ferentiated gonochoristic teleost. Male and female differentiation type of gonad is divided in undifferentiation stage, oogonia-like stage, ovary-like stage, ovary development stage, hermaphroditic testis stage, hermaphroditic ovary stage, and testis development stage. Undifferentiation stage is continued total lenth 18cm at 13 months after hatching. ovary-like stage is continued total length 11~18cm at 13 months after hatching. Ovary-like stage is continued total length 14~26cm at 10~14 months after hatching. Ovary development stage begins from total length 20cm, 14 months after hatching. At 20 months after hatching, 44 percent of total sampled individuals had ovary. Hermaphroditic ovary stage first begins total length 19~20 cm at 15 months after hatching, but it is not observed total length 28~29cm at 20months after hatching. Hermaphroditic testis stage first begins total length 21~22cm at 20months after hatching and is continued for 20months. Testis development stage first begins total length 20~21cm at 20 months after hatching, and is occupied 33 percent total length 28~29cm at 20 months. The beginning of sex differentiation more than 50 percent is from total length 16cm at 11 months after hatching. Sex determination begins total length 20cm, 14months after hatching in female and total length 20cm, 15 months after hatching in male. Sex determination more than 50 percent begins total length 23cm,, 17 months after hatching. Undifferentiated gonadal part of red sea bream consist gonad and fat body. As differentiation is going on and gonad is growing, fat body shrinks. This appearence is showed the same tendency in 3-year old red sea bream. 1.9mm larvae after hatching grow about 19mm larvae for 47 days. The relationship between the total length and body weight of larvae and juveniles in $BW=4.45{\times}10^{-6}TL^{3.4718}$ r=0.9820. Fishes in cage culture grow to maximum total length 28.4cm. The relationship between the total length and body weight of these fishes is $BW=2.36{\times}10^{-2}TL^{2.9180}$, r=0.9971. Undifferentiated gonadal part of red sea bream consist gonad and fat body. As differentiation is going on and gonad is growing, fat body shrinks.

• Journal of Intelligence and Information Systems
• /
• v.19 no.1
• /
• pp.19-33
• /
• 2013

In this research, a proposed Dynamic Virtual Ontology using Tags (DyVOT) supports dynamic search of resources depending on user's requirements using tags from social web driven resources. It is general that the tags are defined by annotations of a series of described words by social users who usually tags social information resources such as web-page, images, u-tube, videos, etc. Therefore, tags are characterized and mirrored by information resources. Therefore, it is possible for tags as meta-data to match into some resources. Consequently, we can extract semantic relationships between tags owing to the dependency of relationships between tags as representatives of resources. However, to do this, there is limitation because there are allophonic synonym and homonym among tags that are usually marked by a series of words. Thus, research related to folksonomies using tags have been applied to classification of words by semantic-based allophonic synonym. In addition, some research are focusing on clustering and/or classification of resources by semantic-based relationships among tags. In spite of, there also is limitation of these research because these are focusing on semantic-based hyper/hypo relationships or clustering among tags without consideration of conceptual associative relationships between classified or clustered groups. It makes difficulty to effective searching resources depending on user requirements. In this research, the proposed DyVOT uses tags and constructs ontologyfor effective search. We assumed that tags are extracted from user requirements, which are used to construct multi sub-ontology as combinations of tags that are composed of a part of the tags or all. In addition, the proposed DyVOT constructs ontology which is based on hierarchical and associative relationships among tags for effective search of a solution. The ontology is composed of static- and dynamic-ontology. The static-ontology defines semantic-based hierarchical hyper/hypo relationships among tags as in (http://semanticcloud.sandra-siegel.de/) with a tree structure. From the static-ontology, the DyVOT extracts multi sub-ontology using multi sub-tag which are constructed by parts of tags. Finally, sub-ontology are constructed by hierarchy paths which contain the sub-tag. To create dynamic-ontology by the proposed DyVOT, it is necessary to define associative relationships among multi sub-ontology that are extracted from hierarchical relationships of static-ontology. The associative relationship is defined by shared resources between tags which are linked by multi sub-ontology. The association is measured by the degree of shared resources that are allocated into the tags of sub-ontology. If the value of association is larger than threshold value, then associative relationship among tags is newly created. The associative relationships are used to merge and construct new hierarchy the multi sub-ontology. To construct dynamic-ontology, it is essential to defined new class which is linked by two more sub-ontology, which is generated by merged tags which are highly associative by proving using shared resources. Thereby, the class is applied to generate new hierarchy with extracted multi sub-ontology to create a dynamic-ontology. The new class is settle down on the ontology. So, the newly created class needs to be belong to the dynamic-ontology. So, the class used to new hyper/hypo hierarchy relationship between the class and tags which are linked to multi sub-ontology. At last, DyVOT is developed by newly defined associative relationships which are extracted from hierarchical relationships among tags. Resources are matched into the DyVOT which narrows down search boundary and shrinks the search paths. Finally, we can create the DyVOT using the newly defined associative relationships. While static data catalog (Dean and Ghemawat, 2004; 2008) statically searches resources depending on user requirements, the proposed DyVOT dynamically searches resources using multi sub-ontology by parallel processing. In this light, the DyVOT supports improvement of correctness and agility of search and decreasing of search effort by reduction of search path.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.239-252
• /
• 1981

The East China Sea is an important region as nursery and spawning grounds for pelagic fishes such as jack mackerel, common mackerel etc. , and thus constitutes a major fishing area for purse-seine fishery. The environment surrounding in this region is under the influence of the Yellow Sea Cold Water, China Coastal Water and Kuroshio Current. The purpose of this study was to clarify the effects of oceanographic conditions and thermal fronts on the formation of the fishing grounds for the mackerels in the East China Sea. Through the analyses of fisheries statistics during 1968-1976 and temperature data, the following facts are found: 1) Approximately $70\%$ of the total mackerel(common) catches appeared to be come from the Tsushima Current region which includes Sakai coast of the Japan Sea, eastern Tsushima and Shirase Island, and Jeju Island of Korea. This area covers only about $8\%$ of the East China Sea. 2) Main fishing grounds for the jack mackerel are also centered around the area of southwestern Goto, Shirase and eastern Tsushima Island where the catches accounted for about $54\%$ of the total jack mackerel catches. 3) Fluctuations in annual catches are relatively small in the Tsushima Current region, compared to other regions such as Yellow Sea, southwestern coast of Kyushu and mid-western part of the East China Sea, where the fisheries yields varied considerably due to unstable fishing conditions. 4) It appears that the fishing grounds for the jack mackerel are mainly distributed along the warmer region ($15-20^{\circ}C$) of the thermal front, and those for the common mackerel are in somewhat colder region ($13-16^{\circ}C$) in the Tsushima Current.

• Korean Journal of Animal Reproduction
• /
• v.26 no.2
• /
• pp.193-199
• /
• 2002

This study was conducted to investigate the optimal physiologic mating time in Hanwoo for protection to decrease of reproductivity and improvement of production of offspring. We observed 32 cows that were devide into 4 parts of treatment : T1(12 months of age and 0.5kg daily gain), T2(12 months of age and 0.8kg daily gain), T3(15 months of age and 0.5kg daily gain) and T4(18 months and 0.5kg daily gain). The first heat of treated cows was 263.3$\pm$6.4 days and average weight was 181.1$\pm$11.3kg. It was revealed the conception rates of first insemination were 25%(T1), 75%(T4) and number of insemination of T3 and T4(both 1.5) was lower than T1 and T2(2.3 and 2.4). In return of estrus after heifer's first parturition, they(T1, T2, T3 and T4) showed 66.2 days, 76.7 days, 62.4 days and 68.5 days respectively and the average was 65.7 days. Plasma progesterone(P4) concentration was nearly the same during the observation periods of treated cows and P4 was released just after 12 months. Only 5 cows (15.6%) in 32 were showed normal estrus cycle and ovulation before 12 months. Before and after parturition, P4 concentration was decreased fastly and then there was no detection of P4 from after parturition to 40 days after milking. P4 would be released again on 45 day after parturition. The results were summarized as that the optimal mating time of Hanwoo heifers was decided by the 14 months of age, 110 cm height and 265kg weight.

• Journal of Animal Environmental Science
• /
• v.16 no.3
• /
• pp.227-236
• /
• 2010

This study was conducted to develop an measuring system and method for fermentation degree of liquid swine manure by visible ray. The constituent changes of liquid swine manure were examined. pH gradually increased with time, but EC gradually decreased. Malodor strength decreased gradually with aeration treatment with time. Control needed more time to decrease malodor strength than aeration treatment. In aeration treatment, there was no germination of seeds (radish, chinese cabbage) up to 6 weeks and germination rate at 15th week was over 50%. However, in control, there was no germination up to end of experiment. Circular chromatography method showed that there was change after 10th week in aeration treatment but there was no change up to end of experiment in control. As a result, the fermentation degree of liquid swine manure would have relations among pH, EC, germination rate, malodor concentration, and reaction of circular chromatography. The simple analytical instrument for liquid swine manure consisted of a tungsten halogen and deuterium lamp for light source, a sample holder, a quartz cell, spectrometer for spectrum analyzer, a malodour measuring device, a software, etc. Results showed that the simple analytical instrument that was developed can approximately predict the fermentation degree of liquid swine manure by visible ray. Generally, the experiment proved that the simple analytical instrument was reliable, feasible and practical for analyzing the fermentation degree of liquid swine manure.

• Radiation Oncology Journal
• /
• v.21 no.1
• /
• pp.82-93
• /
• 2003

Purpose : To reduce the Irradiation dose to the lungs and heart in the case of chest wail irradiation using an oppositional electron beam, we used an Individualized custom bolus, which was precisely designed to compensate for the differences In chest wall thickness. The benefits were evaluated by comparing the normal tissue complication probablilties (NTCPS) and dose statistics both with and without boluses. Materials and Methods : Boluses were made, and their effects evaluated in ten patients treated using the reverse hockey-stick technique. The electron beam energy was determined so as to administer 80% of the irradiation prescription dose to the deepest lung-chest wall border, which was usually located at the internal mammary lymph node chain. An individualized custom bolus was prepared to compensate for a chest wall thinner than the prescription depth by meticulously measuring the chest wall thickness at 1 emf intervals on the planning CT Images. A second planning CT was obtained overlying the individuailzed custom bolus for each patient's chest wall. 3-D treatment planning was peformed using ADAC-Pinnacle$^{3}$ for all patients with and without bolus. NTCPS based on 'the Lyman-Kutcher' model were analyzed and the mean, maximum, minimum doses, V$_{50}$ and V$_{95}$ for 4he heari and lungs were computed. Results .The average NTCPS in the ipsliateral lung showed a statistically significant reduction (p<0.01), from 80.2${\pm}$3.43% to 47.7${\pm}$4.61%, with the use of the individualized custom boluses. The mean lung irradiation dose to the ipsilateral iung was also significantly reduced by about 430 cGy, Trom 2757 cGy to 2,327 cGy (p<0.01). The V$_{50}$ and V$_{95}$ in the ipsilateral lung markedly decreased from the averages of 54.5 and 17.4% to 45.3 and 11.0%, respectively. The V$_{50}$ and V$_{95}$ In the heart also decreased from the averages of 16.8 and 6.1% to 9.8% and 2.2%, respectively. The NTCP In the contralateral lung and the heart were 0%, even for the cases with no bolus because of the small effective mean radiation volume values of 4.4 and 7.1%, respectively Conclusion : The use of an Individualized custom bolus in the radiotherapy of postrnastectorny chest wall reduced the NTCP of the ipsilateral lung by about 24.5 to 40.5%, which can improve the complication free cure probability of breast cancer patients.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.23-29
• /
• 1970

This experiment is to improve the wrinkle recovery (W.R.) of silk fabrics. The silk fabrics is creased very well, and the crease is the serious defection of it. This experiment is to improve the nature by use of formaldehyde on fabrics. The reagents used were HCl, CH$_3$COOH, CaC$_2$, HCHO, Na$_2$CO$_3$, NH$_4$OH, NaOH and NaHCO$_3$. The silk fabrics was treated, to compare 1 he influence of conditions, by varying the quantities of reagents and the temperature of solution, and the reaction time. The cotton fabrics and the viscose rayon were sunk with the silk at the same condition to be compared the influence. 1) Those of the most suitable temperature to improve for the better W.R. are 75$^{\circ}C$ for silk, 35-45$^{\circ}C$ for cotton, and no particular temperature under 75$^{\circ}C$ for viscose rayon. 2) The W.R. improvements after treated at the temperature of 1) were 11％ for silk and 33.4％ for cotton. 3) There are the best treating time for every fabrics. They were 60 to 90 min. for viscose rayon when HAC Ras used for solvent. It took, however, 60min. of the best time for silk, 120 min. for cotton, and 40 min. for viscose rayon when acetic anhydride instead of HAC was used. 4) It was possible to improve 16.6％ of W.R. for silk at the most suitable treating time, 25.0％ for cotton, and 13.3％ for viscose rayon. 5) Acetic anhydride was rather more effective to improve W.R. of both silk and viscose rayon than HAC. 6) Treating time was also shorter in case of using acetic anhydride than HAC. 7) The improvement of W.R. were 8.3％ for silk at the 10 to 14 ml. of HCHO the best volume, 21. 5％ for cotton at 18m!. of HCHO, and 70％ of for viscose rayon at 14 to 18ml. of HCHO. 8) The most effective quantity of HCI is 14 ml. for both silk and cotton. The W.R. improvement of silk was 22.2％, and that of cotton 19.5％. 9) The W.R. of 83.3％ the best for silk and 61. 6％ for cotton were gained when 4.2gr. of NaHCO$_3$ brings down the percent of W.R. for both silk and cotton. 10) The more NaOH and NH$_4$OH as neutralizing agents, the less effectivity of W.R. until the quantities of the reagents are reached to a special range which are 3. 3m!. for silk and 3.3-6.6 ml. for cotton, and then we can see the W.R. increasing as the quantities of reagents are increased. These facts were evident in case of silk and cotton. We can also see with this fact that the reminder of 〔OH$\^$-/〕 neutralizing 〔CH$\^$+/〕in solution makes it possible to treat formaldehyde on fabrics. 11) Low curing temperature was comparatively better for silk, and high temperature better for cotton. 12) The result of this experiment shows that the Improvement of W.R. for silk was possible to 94％ which means 22％ W.R. increase compared to the untreated silk. This effect also shows that the improvement to W '||'&'||' W (wash and wear) of silk will be possible.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.4
• /
• pp.291-298
• /
• 2007

Purpose: To investigate the feasibility of TI-201 SPECT with intra coronary injection (lC-I) in the detection of viable myocardium, we have performed SPECT imaging after direct intracoronary injection of TI-201 and images were compared with those of stress-reinjection (Re-I) SPECT. Methods: Fourteen coronary artery disease patients (male 11, mean age 54 years) who had myocardial infarction or demonstrated left ventricular wall motion abnormality on echocardiography were enrolled. Three mCi of TI-201 was injected into both coronary arteries during angiography and images were acquired between 6- and 24-hour after injection. Reinjection imaging with 1 mCi of TI-201 was performed at 4-hour after adenosine stress imaging with 3 mCi of TI-201. Images were interpreted according to 4-grade visual scoring system (grade 0-3). Segments with mild to moderated uptake (${\leq}$grade 1), and upgraded more than one score with reinjection, and were defined as viable myocardium. Results: Image quality was poor in two cases with IC-I. Numbers of non-viable segments were 60 (23.8%) with IC-I, and 38 (15.1%) with Re-I, respectively. Overall agreement for perfusion grade per myocardial segment in each IC-I and Re-I was 76.5%. Overall agreement for viable segment between IC-I and Re-I was 90.5%. Only one out of 38 segments interpreted as non-viable with Re-I were interpretated as viable with IC-I. And 23 out of 214 segments interpreted as viable with Re-I were interpreted as non-viable with IC-I. Conclusion: Intracoronary TI-201 SPECT seemed to be not advantageous over stress-rest reinjection imaging in the assessment of myocardial viability, mainly due to low count statistics at 6-hour or 24-hour delayed time points. The feasibility of intracoronary TI- 201 SPECT is considered to be limited.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.