• Title/Summary/Keyword: 지구곡률효과

Search Result 5, Processing Time 0.023 seconds

Upward Continuation of Potential Field on Spherical Patch Area (구면부분지역에서의 퍼텐셜마당의 상향연속)

  • Na, Sung-Ho;Chung, Tae Woong;Shin, Young Hong
    • Geophysics and Geophysical Exploration
    • /
    • v.15 no.4
    • /
    • pp.245-248
    • /
    • 2012
  • Two dimensional Fourier transform can be used for the upward continuation of gravity or magnetic field data acquired at given altitude over a rectangular area. Earth's curvature is often neglected in most potential field continuations, however, it should be considered over several hundred kilometer field area. In this study, we developed a new method retaining terms of Earth's curvature to better perform the continuation of potential field on spherical patch area.

The Error Structure of the Radar Reflectivity and the Correction of the Range Dependent Error (레이더 반사도 자료의 오차구조 및 거리오차 보정)

  • Yoon, Jung-Soo;Yoo, Chul-Sang;Kim, Jung-Ho;Jun, Chang-Hyun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.468-468
    • /
    • 2012
  • 레이더 강우를 적극적으로 활용하기 위해서는 레이더 강우에 포함된 각 오차들에 대한 특성을 파악하고 정량화하는 것이 무엇보다 중요하다. 본 연구에서는 레이더 반사도의 오차구조를 파악하고 그러한 오차구조를 갖는 반사도로부터 표출한 CAPPI의 거리오차를 보정하였다. 이러한 거리오차 파악을 위해서는 참 값으로 가정할 수 있는 기준 반사도가 필요하며 본 연구에서는 VPR 모형으로부터 기준 반사도인 지상 반사도를 추정하였다. 그 결과 일정한 VPR 모형을 적용하게 되면 거리와 상관없이 오차는 일정하고 오직 고도에 의해서만 영향을 받는다. 그러나 일정 고도에서의 반사도 표출 방법인 CAPPI는 지구곡률효과로 인해 실제로 거리가 멀어 질수록 관측 고도가 높아진다. 이에 따라서 오차는 거리가 멀어질수록 커지게 된다. 이는 실제 호우사상에 적용한 결과에서도 유사하게 나타났다. 강릉 기상 레이더의 경우 1.5km CAPPI는 약 100km까지 1.5km 고도를 유지하다 그 이상부터 고도가 점점 높아진다. CAPPI의 오차를 거리에 따라 분포시킨 결과에서도 100km까지는 어느 정도 일정한 오차를 보이다 그 이상부터 오차가 점점 증가하는 것으로 나타났다. CAPPI의 오차를 2차원 평면으로 나타낸 결과에서도 호우가 전반적으로 퍼져있는 시점부터 원거리에서 큰 오차를 보이고 있다. 이는 오차의 평균에서 더욱 명확히 나타났다. 이와 같이 CAPPI는 원거리 자료에서 오차가 크게 나타나고 있다. 이에 CAPPI에 포함된 거리오차를 VPR 모형을 이용하여 보정하였다. 그 결과 원거리에서의 오차가 감소하였음을 확인하였다.

  • PDF

Calculation of Radar Echo Signal above Spherical Earth and Its Experimental Validation (지구곡률을 고려한 레이다 수신신호 계산 방법 및 실험적 검증)

  • Koh, Il-Suek;Kwon, Sewoong;Lee, Jong-hyun;Lee, Kiwon;Sun, Woong
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.10
    • /
    • pp.924-931
    • /
    • 2015
  • When a target locates at low altitude over a curved earth surface and far away from a radar, we examine the accuracy of the conventional formulations to compute the radar echo signal. The 4-ray model is used to calculate the scattering by the target to consider the ground plane effect. In this paper, the diffracted wave is not included. Based on the required parameters able to be calculated by known equations for the estimation of the wave propagation phenomena, the radar echo signal is computed and verified by comparing with measured data sets.

The Error Structure of the CAPPI and the Correction of the Range Dependent Error due to the Earth Curvature (CAPPI 반사도의 오차구조 및 지구곡률효과로 인한 거리오차 보정)

  • Yoo, Chulsang;Yoon, Jungsoo
    • Atmosphere
    • /
    • v.22 no.3
    • /
    • pp.309-319
    • /
    • 2012
  • It is important to characterize and quantify the inherent error in the radar rainfall to make full use of the radar rainfall. This study verified the error structure of the reflectivity and corrected the range dependent error in the CAPPI using a VPR (vertical profile of reflectivity) model. The error of the CAPPI to display the reflectivity data becomes bigger for the range longer than 100 km. This range dependent error, however, is significantly improved by corrected the CAPPI data using the VPR model.

Experimental Verification on Factors Affecting Core Resistivity Measurements (II)-Characteristics of Time Series Data and Determination Method of Resistivity (코어비저항 측정에 미치는 영향요소에 대한 실험적 고찰(Ⅱ) - 시계열자료의 특성과 대표비저항 값의 결정)

  • Kim, Yeong Hwa;Choe, Ye Gwon
    • Journal of the Korean Geophysical Society
    • /
    • v.2 no.4
    • /
    • pp.269-276
    • /
    • 1999
  • As a part of trying to get the resistivity values correctly from laboratory core resistivity measurement, the effect of sample holders in resistivity measurement was analyzed and a better way to determine the representative resistivity value from the time series resistivity data was searched. Modified GS type and modified two-electrode type sample holders were devised and their effects have been compared with those of GS and two-electrode type sample holders. The modified two-electrode type sample holder has benefits both in repetition and simplicity in data acquisition. The analysis of distribution trend of the time series resistivity data obtained with different kind of sample holders and source frequencies shows that the maximum curvature point method gives the best result in determining representative resistivity value.

  • PDF