• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.98-98
• /
• 2004

풍력발전시스템은 풍력을 동력원으로 하여 풍차 블레이드를 회전시킴으로 발생하는 동력이 발전기를 작동하여 전기를 발생시키는 무공해 발전시스템의 하나로서 현재 대체 에너지원으로 각광을 받고 있다. 일반적으로 저 회전 고 토크 특성의 풍력에너지를 고 회전 저 토크 특성으로 작동되는 발전기로 전달하기 위하여 증속기를 사용한다. 풍력발전시스템용 증속기는 지상에서 높고 제한된 공간 내에 위치하게 되어 보수가 용이하지 못하므로 최적화한 구조 및 높은 신뢰수명이 요구된다.(중략)

• 기계와재료
• /
• v.19 no.2 s.72
• /
• pp.62-70
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.221-221
• /
• 2003

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.507-515
• /
• 2015

This study was conducted to develop and verify a torque application device for use in a mechanical power-circulation test rig for 5.5 MW wind turbine gearboxes. The design and analysis of the torque application device was conducted. In addition, the torsional stiffness of the test rig was calculated using the rotational angle measurements for each of the components. The calculated stiffness of the test rig was $231.13kN{\cdot}m/rad$ for a clockwise torque application. The rated torque can be applied when the stiffness of the gearbox is greater than $1,064,400kN{\cdot}m/rad$ for a clockwise torque application. Because of the limited rotational angle of the test rig, the potential application of the rated torque is determined according to the torsional stiffness of the test gearbox.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.471-474
• /
• 2009

Gearbox is used to converter the power with high torque and low speed into the power with low torque and high speed. Gearbox housing should be sustained to prevent rotation of gearbox itself due to the difference between input and out torque. Uneven wind causes the reaction system to have unwanted reactive loads together with predictable pure torque. These unwanted reaction loads often cause the failure of gearbox due to bad gear mesh. In this paper, pure torque reaction system is proposed to prevent the failure of gearbox. Effectiveness and functionality of the proposed reaction system are demonstrated through the numerical analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.363-369
• /
• 2004

Vibration/noise analysis as well as strength of gear teeth, roller bearing life. joural bearing design are considered in order to develop the high-speed machine centrifugal pump which had a speed increaser. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors and the transmitted errors of the gearing are considered. shows that. at the operating speed. there are not the critical speed. A high-speed machine centrifugal pump was made in order to evaluate developed speed increaser. Also, strict API standard were introduced for reliability evaluation of developed speed increaser, and performance evaluation were carried out. The result that evaluation items about bearing vibration, shaft vibration, noise, and lubrication temperature were selected, and were tested. a high-speed machine centrifugal pump were able to know what were satisfied with API standard all.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.617-618
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.75-76
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.229-230
• /
• 2013

• Journal of Drive and Control
• /
• v.8 no.1
• /
• pp.55-59
• /
• 2011