• Journal of the Korean Society of Visualization
• /
• v.20 no.3
• /
• pp.117-127
• /
• 2022

The present study has investigated the performance of hydrogen gas generators for inhalation purposes based on polyelectrolyte membrane water electrolysis (PEMWE). The system applied two watering methods. One is pumped water (pumping system) and the other is gravity-fed water without a pump (non-pumping system). The cell efficiencies were compared by measuring the cell voltage and temperature in the hydrogen gas generator, respectively. The results show that the cell voltage and temperature increase with the cell current. The cell temperature is lower in the pumping system than that in the non-pumping system at a given cell current. Even though the amount of hydrogen production is the same regardless of the pumping system, the cell efficiency of the hydrogen gas generator in the non-pumping system is better than that in the pumping system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.198-204
• /
• 2003

A basic experiment was performed to control tile plant growth using acoustic emission technique considering the environmental conditions for plant. At a dry soil condition, the signals due to the cavitation from xylem of angiosperm and gymnosperm were mainly detected. The strong signal from xylem and the weak signal from plasmodesmata and casparian strip were detected at the same time after distilled water was provided. Two signals after providing tile acid and distilled water were contrary to each other. The wind, number of leaf, music, temperature and humidity affected the acoustic emission count from plants but the frequency ranges of the detected signals were the same.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.67-70
• /
• 2009

Because many research using rocket grade peroxide is studied, distillation method for domestic production of rocket grade hydrogen peroxide is required. Distillation methods are very various and divided by feeding method, distillation time, distillation pressure, and so on. Among these, vacuum distillation is a suitable method for hydrogen peroxide. This method can reduce thermal decomposition and reaction with impurities. Distillation condition is determined by Raoult's law. Low vacuum level and vacuum level control are appeared as important problems of the experiment equipment, which are solved by using less leakage vacuum chamber and metering valve.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.238-243
• /
• 1996

현재 상용 공급되고 있는 4종의 경수로 핵연료 피복관에 대해 노외 부식특성 시험을 수행하여 그 특성을 비교하였다. 이중 3종의 피복관은 제조공정을 달리하여 제조된 low tin Zircaloy-4 (피복관 A, B, C)이며, 1종은 Nb이 첨가된 Zr 합금 (피복관 D)이었다. 증류수내 Li 함량을 2.2 ppm, 30 ppm, 220 ppm으로 변화시키며 부식시험을 수행한 결과 최종 pilgering시 낮은 Q 인자와 높은 열처리 온도로 제조된 피복관 A의 내부식성이 대체로 우수하였으며, 220 ppm Li 수용액에서는 Nb이 첨가된 피복관의 내부식성이 매우 우수한 것으로 나타났다. Li 첨가의 영향을 보면 2.2 ppm Li 첨가시에는 증류수와 거의 동일한 부식거동을 나타내고 있으나 30 ppm Li 첨가시에는 부식이 가속되고 있었으며, 220 ppm Li으로 Li 함량이 크게 증가하였을 때 부식속도도 크게 증가하였다. 수소흡수율은 피복관 A에서 가장 높았으며, 피복관 D가 가장 낮은 값을 나타내었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.933-942
• /
• 1992

The effects of the folwrate on the dropsize from the two-phase coaxial nozzle are investigated by using the direct photographic method and the empirical equation is obtained. For the photography, the light source which the life time is the order of 100ns is fabricated and the lens is the zoom lens which has the MICRO function with a teleconvertor. The distillated water and the compressed air of the surrounding temperature are injected and atomized. For the purpose of the exact adjustment and measurement of the flowrates, the two rotameters are used. As a result of this study, the sauter mean diameter of droplets has a tendency for a logarithmic function with air flowrate and for a exponential function with water flowrate.

• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.39-45
• /
• 2007

This paper proposed a shortcut method for the structure design of dividing wall column based on the Fen-ske-Underwood equation by applying it on three conventional simple column configuration. It is shown that the proposed shortcut method can design the column structure including the feed tray, dividing wall section, and side-stream tray in a simple and efficient way in the initial design stage. Simulation study using HYSYS to compare the energy saving performance between the conventional sequential two column system and the dividing wall column designed by the proposed method shows that the proposed dividing wall column system saves from 16% to 65% more over the condepends on the composition of intermediate component while the optimal energy consumption pattern to internal flow distribution on the dividing wall section is characterized by the ESI factor of the feed mixture.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.134-138
• /
• 2000

Addition of carbon and nitrogen source to an alcohol distillery wastewater was tried to increase the cell concentration of a b baker's yeast cultivated in that wastewater. Carbon was found to be primary limiting nutrient and nitrogen secondary limiting o one. Glucose addition increased the cell concentration 1.3 times higher than no addition, and both glucose and $(NH_4)_2S0_4$ a addition did 5.8 times. A fed-batch cultivation by the automatic addition of glucose and ammonium was executed. Added g glu$\infty$se was automatically controlled to low concentration by a method using DO as control parameter. Ammonium was a automatically added as NH40H used as pH $\infty$ntrol agent after initiating glucose addition. By this simple cultivation method t the cell concentration $\infty$내d be efficiently increased from 2.6g/L to 12.0g/L, and maximum specific growth rate and biomass y yield to glu$\infty$se were $0.18hr^{-1}$ and about 0.54g/g respectively. By increasing cell concentration, COD of the wastewater m media could be additionally reduced by about 22%.

• Korean journal of applied entomology
• /
• v.23 no.1 s.58
• /
• pp.61-67
• /
• 1984

Conidial germination of Septoria glycines Hemmi, brown spot fungus of soybean, was studied by slide germination test. Poor conidial germination of S. glycines was observed on sterile distilled water, but potato dextrose agar(PDA) and distilled water floated with soybean leaf disc furnished a satisfactory medium for conidial germination. Exogenous supply of carbon source was essential for conidial germination, while phosphorous and potassium were not evident as that for carbon. Soluble starch was the most suitable as a carbon source for conidial germination and followed by D-glucose, D-galactose and lactose in that order. Maximum germination was attained in the $5\times10^{-2}mol$. concentration of glucose. Germination was decreased with increment of conidial concentration and was almost completely suppressed in the density of 10,000 conidia per $mm^2$. It suggested existing a self-inhibitor(s). Non-washed conidia germinated more than washed conidia and this was obvious when the conidia density was over $2\times10^3$ conidia per $mm^2$ on the dry agar block.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.236-246
• /
• 2011

In this study, we used prepared a cylindrical module consisting 100 hollow fibers of commercialized (hydrophobic) polyethylene membrane of $0.4{\mu}m$ pore size and systematically studied performance of direct contact membrane distillation (DCMD) and sweep gas membrane distillation (SGMD) in terms of variation of permeate flux and salt rejection with respect to temperature drop across the membrane, salt concentrations in feed, and flow rates of cooling water and sweep gas. SGMD was regarded as DCMD with a sweep gas layer between permeate-side membrane surface and cooling water. Sweep gas flow decreases the permeate flux from that of DCMD by providing an additional gas-layer resistance. We compared DCMD and SGMD performance by using mass balance with a fitting parameter (${\omega}$), indicating fraction of permeate flow rate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.68-76
• /
• 2022

This study was performed to investigate the mechanism of the change in compressive strength of autoclave cured geopolymers. Specimens were immerged in distilled water, 2M, 8M, and 14M alkaline solutions for 3, 7, and 21 days. The change in the specimens immersed in a short period of time was not significant, but the compressive strength of the specimens immersed in the distilled water and 8M alkali solution) for 21 days increased more than twice as much as before immersion because of additional geopolymerization. However, compressive strength decreased due to the alkaline aggregate reaction when alkaline solution was supplied more than a certain level of concentration. Therefore, immersing the specimens for more than 21 days in the distilled water or 8M alkaline solution would be desirable for the improvement of compressive strength of autoclave cured specimens.