• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.824-828
• /
• 1995

월성원전에서 삼중수소에 의한 작업자 피폭 및 환경방출량을 가능한 한 낮게 유지하기 위해서는 계통중수중에 축적되는 삼중수소를 근원적으로 제거할 수 있는 삼중수소제거시설이 필수적이다. 삼중수소제거공정은 방사선 안전성과 에너지 효율 측면에서 액상촉매교환과 초저온증류공정의 복합공정이 가장 효과적인 것으로 알려지고 있다. 본 연구에서는 월성원전의 후속기를 고려하여 용량이 연간 8MCi의 삼중수소제거시설에 대한 최적설계를 수행하였다. 액상촉매교환공정에 대해서는 NTU-HTU법 그리고 초전온증류공정에는 Fenske-Underwood-Gilliland법을 이용하여 공정을 해석하였고 공정내 삼중소소의 재고량이 최소가 되는 최적의 설계변수들을 제시하였다.

• Journal of Applied Biological Chemistry
• /
• v.61 no.2
• /
• pp.151-155
• /
• 2018

In this study, cinnamon essential oil (CEO) was formulated as emulsifiable concentrate (EC) and a granule. For the evaluation of their negative effects on the ecosystem, acute toxicities against Cyprinus carpio was determined in a static condition. The formulations were made using CEOs extracted by 3 different methods (steam distillation (SD), solvent extraction and supercritical fluid extraction (SFE)) and were tested to obtain $LC_{50}$ values. Among the ECs, EC including CEO extracted by SFE showed highest acute toxicity against C. carpio. Among the granules, a granule including CEO extracted by SD showed highest acute toxicity against C. carpio. Nevertheless, $LC_{50}$ of EC and a granule formulation with CEOs was higher than toxicity level III of pesticide standardized by Korea rural development administration. These results were similar to those using zebrafishes. Chronic toxicities were not found for 45 days in zebrafishes until $500{\mu}gL^{-1}$ level of EC formulation including CEO obtained by the SD. Based on these results, EC formulation of CEOs may be considered to be used as environmental-friendly natural insecticides in accordance with the standards.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.74.1-74.1
• /
• 2011

탄소나노튜브는 높은 전기 전도성과 열 전도성을 가지며, 이러한 특성 때문에 21세기를 주도해 나갈 수 있는 차세대 첨단 소재로서 각광을 받고 있다. 또한 최근에는 나노공학기술의 발달로 인하여 획기적으로 높은 열전도도를 나타내는 다중벽 탄소나노튜브(Multi-walled Carbon Nanotubes, MWCNTs)의 대량 생산이 가능하게 되면서 다중벽 탄소나노튜브의 높은 열전도도 특성을 이용하여 탄소나노튜브를 기본 유체 및 기능성 유체에 안정하게 분산 시킨 후 이를 이용하고자 하는 연구가 활발히 진행되고 있으며, 탄소나노튜브를 유체에 안정하게 분산시키기 위한 방법으로는 기계적 분산법, 물리적 흡착에 의한 분산법, 화학적 개질에 의한 분산법이 있다. 따라서 본 연구에서는 이들 분산 방법과 탄소나노튜브 입자의 물성치에 따른 나노유체의 특성을 알아보기 위하여 나노유체의 열전도도와 점도 특성을 비교 분석하였다. 모든 물성치는 같지만 탄소나노튜브의 길이만 다른 두 종류의 다중벽 탄소나노튜브에 각각 계면 활성제(Sodium Dodecyl Sulfate, SDS) 100 wt%와 고분자 화합물(Polyvinyl Pyrrolidone, PVP) 300 wt%를 첨가하여 나노유체를 제조하였으며, 산화처리 된 다중벽 탄소나노튜브(Oxidized Multi-Walled Carbon Nanotubes, OMWCNTs)를 증류수에 초음파 분산하여 산화나노유체를 제조하였다. 나노유체의 열전도도는 전기 전도성 유체의 비정상 열선법(Transient Hot-wire Method)을 이용하여 측정하였고, 나노유체의 점도는 회전형 디지털 점도계를 이용하여 측정하였다. 실험 결과, 상온에서 동일 혼합비의 나노유체를 비교했을 때, 산화나노유체가 SDS 100 wt%, PVP 300 wt%를 혼합한 다른 나노유체보다 높은 열전도도 특성을 보였으며 점도 특성 또한 가장 낮은 것으로 측정되었다. 특히 상온에서 0.1vol%의 산화 CM-100 나노유체는 증류수보다 열전도도가 8.34%가 증가하였고, $10^{\circ}C$의 저온에서는 상온에서 증류수와 비교하여 측정된 열전도도 값보다 0.36%가 감소한 7.98%가 증가함을 보였다. 본 연구를 통하여 얻어진 결과는 높은 열전도도를 필요로 하는 열교환기의 작동유체나 기타 활용 분야에 대한 기초 자료로써 유용한 정보를 제공할 것이라 판단된다.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.3
• /
• pp.313-319
• /
• 2016

In this study, the performance experiment was conducted to compare the permeate flux of hollow fiber Vacuum Membrane Distillation module according to leak problem between module housing and membrane bundle. For the permeate flux performance experiment of the two Vacuum Membrane Distillation modules, the Lab-scale experimental equipment was built in the capacity of $1m^3/day$. The performance test of the two Vacuum Membrane Distillation modules were analyzed according to the feed water conditions. As a result, it was analyzed that the leak VMD module decreased about 14% of permeate flux than normal VMD module.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.171-178
• /
• 2014

The purpose of this study was to analyse the volatile components of Thymus magnus Nakai extracted by different extraction methods and reproduce scent close to original plant based on the results. For this purpose, the essential oil of T. magnus was extracted by supercritical fluid extraction (SFE), water and steam distillation (WSD) and simultaneous steam distillation and extraction (SDE) methods. The compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GC-MS). Consequently, linalool (0.1%) and trans-sabinene hydrate (0.9%) contents in the essential oil extracted by SFE method of $40^{\circ}C$ - 400 bar condition were relatively higher than compositions of the essential oil extracted by different conditions. The contents of borneol (3.82%), terpinen-4-ol (0.3%) and caryophyllene oxide (2.2%) were relatively higher at $50^{\circ}C$ - 400 bar and the contents of ${\beta}$-bisabolene (5.88%), 1-octen-3-ol (0.31%), caryophyllene (2.91%), p-cymene (2.04%) and ${\gamma}$-terpinene (0.52%) were extracted relatively higher at $50^{\circ}C$ - 300 bar. The compositions of the essential oil extracted by SFE method of $50^{\circ}C$ - 200 bar condition contained relatively higher contents of thymol (77.63%) and carvacrol (5.65%). The contents of ${\alpha}$-bisabolol (0.17%), caryophyllene (6.46%), cis-${\alpha}$-bisabolene (1.52%) and ${\beta}$-bisabolene (20.65%) in the essential oil extracted by WSD method were relatively higher than compositions of the essential oil extracted by SFE method, and by SDE method we couldn't obtained essential oil. The results of this study could be utilized to reproduce scent close to original scent of T. magnus.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.17-22
• /
• 2020

Light Naphtha is distillated from crude oil unit and separated into the methane, ethylene and propylene by boiling point difference in sequence. This separation is conducted using a series of binary-like columns. This separation method is known that the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by the stage computation with ideal tray efficiency in equilibrium condition. Compared with the performance of a conventional system of 3-column model, The design outcome shows that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. The performance of the new process indicates that an energy saving of 12.1% is obtained and the cost savings of 44 million won per day based on gross domestic product is reduced under same total number of trays and the initial investment cost is saved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.21-27
• /
• 2018

FRN (Full range Naphtha) is distilled from crude oil in a Naphtha Splitter Unit and is separated into the Light Straight Naphtha, Heavy Naphtha, and kerosene according to the boiling point in sequence. This separation is conducted using a series of binary-like columns. In this separation method, the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by a stage to stage computation with an ideal tray efficiency in the equilibrium condition. Compared to the performance of a conventional system of 3-column model, the design outcome indicates that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. An analysis of the performance of the new process indicated an energy saving of 12.3% under same total number of trays and with a saving of the initial investment cost.

• The Journal of Engineering Geology
• /
• v.34 no.1
• /
• pp.25-38
• /
• 2024

Laboratory tests of accelerated artificial weathering compared the effects of seawater and acidified distilled water on rock weathering. The experiments simulated chemical and physical weathering of five different types of volcanic rock by applying 45 freeze-thaw cycles using seawater and acidified distilled water (pH 3), both at 70℃. The physical properties and uniaxial compressive strength (UCS) of the rocks were measured after 15 and 45 cycles of artificial weathering. Most of degradation of physical properties appeared within the first 15 cycles, and acidified distilled water had a greater effect than seawater. Analysis of variance (ANOVA) statistically evaluated the differences in UCS of the different rock types during the tests. The rate of UCS reduction after 45 cycles was similar across the samples, being independent of the rock type and the trend of changes in physical properties. In contrast to the changes in the physical properties, the UCS was more affected by seawater than by acidified distilled water.

• Applied Biological Chemistry
• /
• v.41 no.1
• /
• pp.84-88
• /
• 1998

Composition of volatile flavor components of chestnut flower sand honey were investigated by GC and GC-MS. A total of 64 components including 14 aromatic compounds, 13 hydrocarbons, 7 fatty acids, 4 terpenes, 12 oxygenated hydrocarbons, and 7 misellaneous compounds and a total 41 components including 7 aromatic compounds, 16 hydrocarbons, 12 fatty acids, 1 terpene, 2 oxygenated hydrocarbons, and 3 misellaneous compounds were identified from total volatile concentrates of chestnut flower and honey respectively. The main components of flower volatile were 2-phenyl ethyl alcohol, 1-phenyl ethyl alcohol and benzyl alcohol which comprise 49.02% of this volatiles The main components of flower volatile were 2-phenyl ethyl alcohol, 1-phenyl ethyl alcohol and benzyl alcohol which comprise 49.02% of this volatiles. Aromatic compounds such as 2-phenyl ethyl alcohol, benzyl alcohol, 1-phenyl ethyl alcohol, 1-(2-aminophenyl) ethanone act as major contributor to the characteristic honey-like flavor of chestnut honey.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.5
• /
• pp.439-446
• /
• 2003

Various volume of water for the optimal brewing condition of the Korean distilled liquor produced by liquefaction of rice and corn starch was investigated Pilot brewings were carried out by the liquefaction of 5kg of rice and 10kg of corn starch with 150%, 200% and 250% of water regarding the amount of rice and corn starch. The pH, alcohol production and total acidity were normal during the fermentation process. The yield was proportional to the amount of water added and the highest yield was obtained by 250% of water addition without loss of quality. All the test results were not significantly different by the one-way ANOVA and Duncan's multiple range test at p<0.05 and the flavor profiles were also not different according to the amount of water added. As a result, 250% of water addition was the most economical and optimal brewing condition in this study.