• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.17-24
• /
• 2005

Korean pine (Pinus koraiensis Sieb.et Zucc.) boards of 30 mm thickness were treated by steaming and four different drying methods. Small specimens were taken from the sapwoods of the treated boards and their longitudinal liquid permeability was measured according to Darcy's law. The specimens were also extracted with alcohol and aceton solutions to examine the mechanism of liquid flow in wood. It was observed that specific permeability drastically decreases with measurement time, resulting in violation of Darcy's law. It may be due to that air bubbles formed under vacuum block flow paths in resin canals. The average specific permeabilities of non-extracted and extracted specimens are different from one treatment to another. It is supposed that the properties of residual resin in resin canals change depending on the conditions of treatments. Anatomical examination was conducted with a scanning electron microscope.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.6
• /
• pp.82-89
• /
• 1999

This paper present the strength estimation of precast concrete products by chloride ion penetration method. The relation between the strength of precast concrete product and the ion passing charge is linear and a numerical model of FCK =515.96-0.201Q is prposed. The results showe good agreement at about 9.0% error ration with the estimated model results for real precast concrete product.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.699-706
• /
• 2018

The permeation properties of plasma polymer membranes were studied for permanent gases such as He, $H_2$, $O_2$, $N_2$, $CH_4$ and condensable vapors such as $CO_2$, $C_2H_4$, $C_3H_8$. The plasma polymers were prepared by the discharge of microwave or radiofrequency(RF) wave. Hexamethyldisiloxane (HMDS) vapor was used as a monomer for plasma polymerization. In HMDS plasma-polymerized membranes prepared under microwave discharge, the permeability coefficient was dependent of the kinetic molecular diameter of the permeate gases. Additionally the membranes showed higher $O_2/N_2$ permselectivity compared to the plasma polymers from radiofrequency discharge. On the contrary, in the HMDS plasma-polymerized membranes prepared under radiofrequency discharge, the permeability coefficient was dependent of the critical temperature of the permeant gases. The membranes showed high selectivities of $C_2H_4$ and $C_3H_8$ over $N_2$. The permeability coefficient of plasma polymerized membranes prepared under microwave discharge was dependent of the molecular diameter of permeant gases because of high crosslinking density of the membrane. However, the crosslinking density of the plasma polymerized membranes prepared under RF discharge was lower because the energy density of RF wave is weaker than that of microwave. Hence, the permeability of RF plasma polymerized membranes became dependent of the critical temperature rather than molecular diameter of the gases.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.137-138
• /
• 2006

• Membrane Journal
• /
• v.22 no.3
• /
• pp.178-190
• /
• 2012

Flat sheet membranes were prepared with polysulfone (PSF) by an immersion precipitation phase inversion method. Membranes were prepared with PSF/N-methylpyrrolidone (NMP)/polyvinylpyrrolidone (PVP)/phosphoric acid casting solution and water coagulant. By using the successive process of the vapor-induced phase inversion (VIPS) followed by the nonsolvent-induced phase inversion (NIPS), the effect of phosphoric acid addition to casting solution on morphology and permeability of membrane was studied. The mean pore size, the porosity, and the water flux of membranes were increased by the addition of small amount of phosphoric acid. Furthermore, the morphology of the prepared membranes were changed from a dense sponge-like structure to highly enhanced asymmetric structure. PSF/NMP/PVP/phosphoric acid/2-butoxyethanol (BE) casting solution were prepared and cast the successive VIPS-NIPS process with same experimental condition. Due to the addition of BE to casting solution, the mean pore size and almost 0.1 ${\mu}m$ and the water flux increased about 10 to 12 $L/cm^2{\cdot}min{\cdot}bar$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.451-451
• /
• 2011

적외선 소자의 재료로 쓰이는 액상 에피 성장법(Liquid phase epitaxy: LPE)으로 성장된 HgCdTe (MCT)박막의 Hg 분위기 열처리에 따른 구조적 변화를 고 분해능 투과 전자 현미경으로 관찰하였다. 일반적으로 LPE방법으로 성장된 MCT박막은 성장 방법의 특성상 Te 과다 영역의 성장용액이 사용되므로 상온 냉각 과정에서 박막 내 국부적인 Te 석출물을 형성 시킬 가능성이 높다. 또한, 성장 과정시 높은 Hg 증기압으로 인해 Hg-vacancy가 존재하므로 품질을 저하시키는 요인이 된다. 따라서, 본 실험에서는 Hg-vacancy와 국부적인 Te 석출물의 제거를 위해 Hg 분위기 열처리 공정을 실시하여 박막의 결정성 변화 및 국부적인 조성 변화를 관찰하였다. 실험결과, 열처리에 따른 Hg의 박막 내 공급으로 인한 이차상의 형성 등이 관찰 되었으며 부피 팽창으로 인해 격자의 변형이 관찰 되었다. 이는 투과 전자 현미경의 고 분해능 이미지 와 Gaussian mask filtering 기법으로 보여진 격자 줄무늬상 (lattice fringe)으로 확인 하였다. 또한, 열처리에 따른 국부적인 조성 편기의 해소는 high angle annular dark field scanning TEM(HAADF-STEM)을 이용하여 관찰 하였다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.9 no.1
• /
• pp.13-23
• /
• 1980

sing the physical characteristics of nuclear radiation penerated into the cross section of the measurement of void fraction in saturated vapor & water passing through the is analyzed theoretically and the solutions are achieved by means of computer simulation. These theoretical results are also approved through the experiment with the simulators.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.237-244
• /
• 2013

We fabricated several composite membranes with selectively permeable performance designed to facilitate water vapor transport and resist DMMP vapor permeation. Materials for selective permeable membrane were based on polyvinyl alcohol and functional polymer containing basic functional group. With these materials, we characterized selectively permeable performance to identify next-generation material with chemical-biological protective capability. Results showed that polyvinyl alcohol (PVA)/polyethyleneimine (PEI) materials possessed performance with superior water vapor permeation ($2,200{\sim}2,900g/m^2/day$) and protective capability against DMMP vapor ($47g/m^2/day$).

• Membrane Journal
• /
• v.20 no.1
• /
• pp.8-12
• /
• 2010

Poly(3,4-ethylenedioxythiophene) (PEDOT), which has the highest stability in conducting polymer was employed to electrochromic (EC) film and studied about electrochromic properties according to the film fabrication method. PEDOT films were coated by two different methods, electropolymerization (EP) and vapor phase polymerization (VPP). Both of PEDOT films showed dark blue color at dedoped neutral state. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-Vis Spectrophotometer and Cyclic voltammetry. Surface morphologies of the PEDOT VPP film at oxidized and reduced state were obtained by AFM. The average surface roughness of the PEDOT-VPP film was 50 nm and more homogeneous than that of the PEDOT-EP. The EC property from the PEDOT-VPP film was improved compared to that of the PEDOT-EP film, to show a response time of 1.5 sec, transmittancechange of 49%, and coloration efficiency of 402.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.334-340
• /
• 2008

We investigated the electromagnetically induced transparency (EIT) and the Hanle spectrum in a paraffin coated Rb vapor cell. The EIT spectrum was observed in the $F_g=2$, $3{\rightarrow}F_e=3$ transition of the $^{85}Rb$ $D_1$-line by using two independent external cavity diode lasers, and the Hanle spectrum was observed by using one external cavity diode laser in the $\Lambda$-type scheme between the Zeeman sublevels of the $F_g=2{\rightarrow}F_e=1$ transition of the $^{87}Rb$ $D_1$-line. In the Hanle spectrum, we could observe the dual-structured spectrum in the paraffin coated vapor cell. We investigated the dual-structured lineshape by applying an external magnetic field, and varying the direction of the magnetic field. The narrow linewidth of dual-structured EIT was measured to be approximately 200 Hz.