• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.55-72
• /
• 1995

The purpose of this study is to evaluate the effects of mechanical and thermal fatigue on the shear bond strength(SBS) in orthodontic brackets bonded to human premolars with chemically cured adhesive(Mono-$Lok^2$, Rocky Mountain Orthodontics). Two types of metal brackets (Ormesh, Microloc) and three types of ceramic brackets (Fascination, Starfire, Transcend 2000) were used in this study. The $10^6$ loadcycles of $|7.4{\times}10{^2}sin2{\pi}ft|g{\cdot}cm$ and the 1,000 thermocycles of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ baths were acturated as mechanical and thermal fatigue stress, and SBS were measured after each fatigue test. The fracture sites were examined by stereoscope and scanning electron microscope. The results obtained were summarized as follows, 1. In static shear bond test, Fascination brackets showed the maximum SBS($20.78\pm3.45$ MPa) and Microloc brackets showed the minimum SBS($14.88\pm3.10$ MPa). Fascination and Starfire brackets showed significantly greater SBS than Microloc brackets(P<0.05). 2. In mechanical fatigue test, Fascination brackets showed the maximum SBS ($20.19\pm3.45$ MPa) and Starfire brackets showed the minimum SBS($9.10\pm8.33$ MPa). The SBS or Transcend 2000 brackets(P<0.01) and Starfire brackets(P<0.05) significantly decreased after $10^6$ loadcycles. 3. In thermocycling test, Ormesh brackets showed the maximum SBS ($19.36\pm2.76$ MPa) and Starfire brackets showed the minimum SBS($11.94\pm6.86$ MPa). The SBS of Transcend 2000(P<0.01), Microloc and Starfire brackets(P<0.05) significantly decreased after $10^3$ thermocycles. 4. Failure sites of thermocycling groups were similar to those of static groups but after mechanical fatigue test, Ormesh and Transcend 2000 brackets failed at the bracket/resin interface and Microloc brackets failed within adhesive. Facination brackets failed at the enamel/resin interface irrespective of experimental condition.

• Clinical and Experimental Pediatrics
• /
• v.51 no.10
• /
• pp.1096-1101
• /
• 2008

Purpose : Patients with chronic granulomatous disease (CGD) have genetic mutations in a component of the NADPH oxidase enzyme that is necessary for the generation of the superoxide anion. The profound defect in innate immunity is reflected by the patients susceptibility to catalase-positive bacteria and fungi. In addition, CGD patients display signs of persistent inflammation, which is not associated only with deficient superoxide anion production. The aim of this study was to elucidate the cytokine responses in CGD patients after $TNF-{\alpha}$ stimulation. Methods : Heparinized blood samples were collected from 8 CGD patients and 10 healthy volunteers. Monocytes ($1{\times}10^6cell/well$) isolated by the magnet cell isolation system were incubated with a constant amount of $TNF-{\alpha}$ (10 ng/mL) at $37^{\circ}C$ for 6 h. Incubated cells were harvested at 60-min intervals for IL-8 and IL-10 mRNA analysis, and the supernatant was collected at the same intervals to determine IL-8 and IL-10 expression. Monocytes from healthy volunteers were also incubated with antioxidants followed by $TNF-{\alpha}$ stimulation for IL-8 and IL-10 expression. Results : In CGD patients, a high expression of IL-8 together with a significantly higher IL-10 expression than in the healthy controls was seen after $TNF-{\alpha}$ stimulation. Moreover, normal monocytes treated with antioxidants exhibited increased IL-8 responses. Conclusion : The absence of phagocyte-derived reactive oxidants in CGD might be associated with a dysregulated production of pro- and antiinflammatory cytokines. Additional research related to reactive oxidants is needed to clarify the role of cytokines in CGD patients.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.333-340
• /
• 2010

The Korean Dendropanax lacquer, made from a natural resinous sap from Dendropanax orbifera Lev., was used as a golden and transparent varnish for the traditional artifacts (armor uits, helmets, arrowheads, etc.) to make them be brilliant golden color. The cured film of the acquer has excellent protective properties such as weatherability, water resistance, and nticorrosive. But, one of disadvantages is that takes a long time and much energy to fulfill curing the lacquer. The chemical constituents of the lacquer contained conjugated diene compounds s the photopolymerizable monomers. These monomers easily polymerized in sunlight to form olden-colored, hard-coating films in a short time. Photooxidation may be one of the most mportant reactions in the chemistry of the lacquer. Although the Korean Dendropanax Lacquer hould be dried to a thoroughly dry stage to achieve optimal film properties, curing with elevated emperatures may be required for the protracted curing time at atmospheric temperature. So we ntended to accelerate the curing rate of the lacquer by dual curing of thermal and radiation uring. The effect of thermal initiator on the thermal curing reaction was evaluated by monitoring he changes in double bond peak with FT-IR. Then the curing rate of the lacquer blended with hermal initiator and photoinitiator together was measured during dual curing using a RPT with V spot curing machine. Thermal initiator not only accelerated the curing rate but also improved he physical property. And the curing rate of the Korean Dendropanax lacquer was improved by ual curing method of thermal and UV curing. According to these results, the application area of he Korean Dendropanax lacquer could be expanded to surface coatings for electronic devices uch as mobile phones or electronics.

• Journal of Environmental Science International
• /
• v.16 no.4
• /
• pp.523-532
• /
• 2007

This study utilized the 1/25,000 topographic map of the upper area from the Geum-ho watermark located at the middle of Geum-ho river from the National Geographic Information Institute. For the analysis, first, the influence of the size of critical area to the hydro topographic factors was examined changing grid size to $10m{\times}10m,\;30m{\times}30m\;and\;50m{\times}50m$, and the critical area for the formation of a river to $0.01km^2{\sim}0.50km^2$. It is known from the examination result of watershed morphology according to the grid size that the smaller grid size, the better resolution and accuracy. And it is found, from the analysis result of the degree of the river according to the minimum critical area for each grid size, that the grid size does not affect on the degree of the river, and the number of rivers with 2nd and higher degree does not show remarkable difference while there is big difference in the number of 1st degree rivers. From the results above, it is thought that the critical area of $0.15km^2{\sim}0.20km^2$ is appropriate for formation of a river being irrelevant to the grid size in extraction of hydro topographic parameters that are used in the runoff analysis model using topographic maps. Therefore, the GIUH model applied analysis results by use of the river level difference law proposed in this study for the explanation on the outflow response-changing characters according to the decision of a critical value of a minimum level difference river, showed that, since an ogival occurrence time and an ogival flow volume are very significant in a flood occurrence in case of not undertow facilities, the researcher could obtain a good result for the forecast of river outflow when considering a convenient application of the model and an easy acquisition of data, so it's judged that this model is proper as an algorism for the decision of a critical value of a river basin.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.1
• /
• pp.99-108
• /
• 2004

Purpose: The ability to noninvasively track the migration of neural progenitor cells would have significant clinical and research implications. We generated stably transfected F3 human neural progenitor cells with human sodium/iodide symporter (hNIS) for noninvasively tracking F3. In this study, the expression patterns of hNIS gene in F3-NIS were examined according to the cultured time and the epigenetic modulation. Materials and Methods: F3 human neural stem cells had been obtained from Dr. Seung U. Kim (Ajou University, Suwon, Korea). hNIS and hygromycin resistance gene were linked with IRES (Internal Ribosome Entry Site) under control of CMV promoter. This construct was transfected to F3 with Liposome. To investigate the restoration of hNIS gene expression in F3-NIS, cells were treated with demethylating agent (5-Azacytidine) and Histone deacetylase inhibitor (Trichostatin A: TSA). The expression of hNIS was measured by I-125 uptake assay and RT-PCR analysis. Results: The iodide uptake of the F3-NIS was higher 12.86 times than F3 cell line. According to the cell passage number, hNIS expression in F3-NIS gradually diminished. After treatment of 5-Azacytidine and TSA with serial doses (up to $20{\mu}M$, up to 62.5nM, respectively) for 24 hours, I-125 uptake and mRNA of hNIS in F3-NIS were increased. Conclusion: These results suggest that hNIS transfected F3 might undergo a change in its biological characters by cell passage. Therefore, the gene ex[ressopm of exogenous gene transferred human stem cell might be affected to the epigenetic modulation such as promoter methylation and Histone deacetylation and to the cell culture conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.3
• /
• pp.127-144
• /
• 1979

Recent trend in the studies on the forming processes, chemical characteristics and chemical structure of humic substances with some discussions are reviewed and some arguments for the elucidation of the chemical structure of humic substances are summarized.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.350-357
• /
• 2001

This study was performed to evaluate an effect of soil water retention and chinese cabbage growth on application of super water absorbent(CPAM-AS-hyd). In seedling experiments, the CPAM-AS-hyd application rates were 0, 5 and 10kg/10a in bed soil of experimental field. The emergence percentage of chinese cabbage was increased by 9% with application of CPAM-AS-hyd otherwise emergence rates was delayed by 1 day. Water content in soil with CPAM-AS-hyd(10kg/10a) was 27.6%(v/v) at 10days after irrigation and that of control was 20.7%. The CPAM-AS-hyd application caused to alleviate wilting point by 5 days. The content of NO3-N in bed soil was increased with CPAM-AS-hyd application. In the field experiments, as the CPAM-AS-hyd application rates were 5kg/10a and 10kg $10a^{-1}$, the irrigation amounts applied during the growth periods were 1.87 ton, 1.65 ton and 1.53 ton at-0.2bar irrigation frequence and 1.38 ton, 1.25 ton and 1.15 ton at -0.5bar for growth period control, in the CPAM-AS-hyd of 5kg $10a^{-1}$ and CPAM-AS-hyd of 10kg $10a^{-1}$ plot, respectively. The CPAM-AS-hyd application caused to increase yield of chinese cabbage by 9~34% as compared to the control. The contents of $NH_4-N$ and $NO_3-N$ in soil were decreased with the CPAM-AS-hyd application in 10 days after transplanting of chinese cabbage, but the contents of those in soil were increased with the CPAM-AS-hyd application as compared to the control in 20 days after transplanting. The T-N, CaO, MgO and $K_2O$ contents in chinese cabbage increased due to the CPAM-AS-hyd application however $P_2O_5$ content was similar to the control.

• Development and Reproduction
• /
• v.11 no.3
• /
• pp.167-177
• /
• 2007

In the present study, we isolated three human adult stem cells including adipose tissue-derived stem cells(HAD), umbilical cord-derived stem cells(HUC), and amnion-derived stem cells(HAM) and analysed their characteristics. And we examined whether HAD could be used as therapeutical cells for the heart diseases. Both HAM and HUC appeared very similar morphology but HAD was different. Doubling time of HUC was most fast, but total doubling numbers of HUC was same with HAM. Total doubling numbers of HAD was much more than others. Expression patterns of genes and proteins of three human adult stem cells were very similar. Also they were differentiated into adipocytes, osteocytes, and chondrocytes. In addition, they expressed many cardiomyocyte-related genes. But expression pattern of genes is a little different. When HAD were cultivated in the presence or absence of various combinations of BMP and FGF after 5-azacytidine expose for 24 h, expression of Cmlc-1, and ${\alpha}1c$ genes was significantly increased. However, expression of troponin T, troponin I and Kv4.3 genes was not changed. Based on these observations, it is suggested that HAD, HUC, and HAM might be used as potentially therapeutical cells for clinical application.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.2
• /
• pp.222-228
• /
• 2001

Backgrounds : Recent technological developments have introduced a new method to identifying M. tuberculosis complex DNA in clinical samples directly. The direct amplification test (DAT) is approved for identifying M. tuberculosis complex in respiratory specimens that are smear-positive for acid-fast bacilli (AFB). When there is a discrepancy between the AFB smear and DAT, no information on their clinical utility is currently available. In this study, the diagnostic reliability of DAT was investigated in suspected pulmonary tuberculosis patients whose sputum AFB smear was negative. Methods : From June 1, 1998 through May 30, 1999, 909 patients with presumed active pulmonary tuberculosis were enrolled. A sputum AFB stain, culture, DAT and/or biopsy were performed. Using the criteria of clinical tuberculosis or confirmed tuberculosis, the positive predictive value of DAT in diagnosing pulmonary tuberculosis was investigated. Results : The positive predictive value of DAT was 82.1% by the clinically active tuberculosis criteria. However, it decreased to 61.5% when diagnosis was restricted to only to culture positive or biopsy proven cases. The false positive rate of DAT was 18.0%. Conclusion : The DAT is a valuable diagnostic method in suspected patients whose sputum AFB is was negative.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.265-285
• /
• 1999

The purposes of this investigation were to observe the reaction kinetics of five commercial dual cured resin cements (Bistite, Dual, Scotchbond, Duolink and Duo) when cured under varying thicknesses of porcelain inlays by chemical or light activation and to evaluate the effect of the porcelain disc on the rate of polymerization of dual cured resin cement during light exposure by using thermal analysis. Thermogravimetric analysis(TGA) was used to evaluate the weight change as a function of temperature during a thermal program from $25{\sim}800^{\circ}C$ at rate of $10^{\circ}C$/min and to measure inorganic filler weight %. Differential scanning calorimetry(DSC) was used to evaluate the heat of cure(${\Delta}H$), maximum rate of heat output and peak heat flow time in dual cured resin cement systems when the polymerization reaction occured by chemical cure only or by light exposure through 0mm, 1mm, 2mm and 4mm thickness of porcelain discs. In 4mm thickness of porcelain disc, the exposure time was varied from 40s to 60s to investigate the effect of the exposure time on polymerization reaction. To investigate the effect on the setting of dual cured resin cements of absorption of polymerizing light by porcelain materials used as inlays and onlays, the change of the intensity of the light attenuated by 1mm, 2mm and 4mm thickness of porcelain discs was measured using curing radiometer. The results were as follows 1. The heat of cure of resin cements was 34~60J/gm and significant differences were observed between brands (P<0.001). Inverse relationship was present between the heat of reaction and filler weight % the heat of cure decreased with increasing filler content (R=-0.967). The heat of reaction by light cure was greater than by chemical cure in Bistite, Scotchbond and Duolink(P<0.05), but there was no statistically significant difference in Dual and Duo(P>0.05). 2. The polymerization rate of chemical cure and light cure of five commercially available dual cured resin cements was found to vary greatly with brand. Setting time based on peak heat flow time was shortest in Duo during chemical cure, and shortest in Dual during light cure. Cure speed by light exposure was 5~20 times faster than by chemical cure in dual cured resin cements. The dual cured resin cements differed markedly in the ratio of light and chemical activated catalysts. 3. The peak heat flow time increased by 1.51, 1.87, and 3.24 times as light cure was done through 1mm, 2mm and 4mm thick porcelain discs. Exposure times recommended by the manufacturers were insufficient to compensate for the attenuation of light by the 4mm thick porcelain disc. 4. A strong inverse relationship was observed between peak heat flow and peak time in chemical cure(R=0.951), and a strong positive correlations hip was observed between peak heat flow and the heat of cure in light cure(R=0.928). There was no correlationship present between filler weight % or heat of cure and peak time. 5. The thermal decomposition of resin cements occured primarily between $300^{\circ}C$ and $480^{\circ}C$ with maximum decomposition rates at $335^{\circ}C$ and $440^{\circ}C$.