• Journal of the Society of Disaster Information
• /
• v.10 no.2
• /
• pp.220-228
• /
• 2014

A stalking is becoming more diverse and the methods are developing over time as the society has changed over time due to the advancement of information technology but an initial countermeasure seems to be difficult as there is no sufficient legislations against such crimes as stalking. Our country passed laws regulating such stalking at 1999 and four more additional bills were proposed until the 18th National Assembly but they failed to become legalized. Two more additional bills were proposed during 19th National Assembly which are still pending. Crimes such as stalking violates and invades physical and psychological freedom of the victims and the crimes are severely inveterate and intentional. Advanced countries such as the United States, the Great Britain, Germany, and Japan enacted legislations that strictly regulates stalking and also appropriate responses. As these exemplary cases show, it is essential that our country also requires an effective legislations against crime of stalking and protecting a victim of the crime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.268-275
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with stub and ground slot for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of one circular ring of radiating patch, cross strip in circular ring, modified feed line, and two rectangular slot in the ground plane for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2518-2525
• /
• 2015

In this paper, we propose a UWB(Ultra Wide Band) antenna with CPW(Coplanar Waveguide) structure notched the 802.11a(5.15 ~ 5.825 GHz) band by using the U shaped slot. The proposed antenna not only shows Ultra-Wideband characteristic(3.1 ~ 10.6 GHz) suitable for UWB communications but has partially notched-band characteristic to reject 5 GHz WLAN band(5.15 ~ 5.825 GHz). The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $30mm(W){\times}20mm(L){\times}1mm(t)$. Fabricated antenna satisfied $VSWR{\leq}2$ in 3.1 ~ 10.6 GHz except for the band rejection of 5.15 ~ 5.825 GHz. And measured results of gain and radiation patterns characteristics displayed determined for operating bands.

• Pediatric Infection and Vaccine
• /
• v.9 no.1
• /
• pp.110-116
• /
• 2002

Tuberculous otitis media is a very rare disease in extrapulmonary tuberculosis and in chronic otitis media nowadays. The characteristic signs seem to have altered from the past ones. And the suspicion index is very low that there is often a considerable delay prior to diagnosis. This might result in irreversible complications such as hearing loss, facial nerve paralysis and labyrinthitis. It is difficult to be defined by culture, so many patients with tuberculous otitis media are subjected to have surgery without a correct etiologic diagnosis. Therefore bacteriologic study of secretion and pathologic examinations of biopsied tissue are mandatory. We report one year and 11 months old boy with tuberculous otitis media having painful otorrhea and perforated tympanic membrane diagnosed by histologic finding and polymerase chain reaction(PCR). And we would like to emphasize the fact that tuberculous otitis media must be considered in the differential diagnosis of persistent suppurative otitis media despite appropriate antibiotic therapy considering the increasing tendency in incidence of Tuberculosis in Korea these days.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.740-747
• /
• 2019

In this paper, an antenna applicable to WLAN and WiMAX frequency bands is designed, fabricated, and measured. The proposed antenna is designed to have two branch strip line in the patch plane and a rectangular slit in the ground plane based on microstrip feeding for triple band characteristics and added a vertical strip in the ground plane to enhance impedance bandwidth characteristics. The proposed antenna is designed on a substrate with a relative permittivity of 4.4, a thickness of 1.0 mm, and has a size of $18.0mm(W1){\times}37.3mm$ (L4+L5+L7). From the fabricated and measured results, impedance bandwidths of 480 MHz (2.32 to 2.80 GHz) for 2.4/2.5 GHz band, 810 MHz (3.22 to 4.03 GHz) for 3.5 GHz band, and 1,820 MHz (5.05 to 6.87 GHz) for 5.0 GHz band were obtained based on the impedance bandwidth. Measured 3D pattern and gains are displayed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.119-126
• /
• 2019

In this paper, a monopole antenna applicable to WLAN standardization is designed, fabricated, and tested. The proposed antenna is designed to have three microstrip lines based on microstrip feeding method and inserted one stub to enhance impedance characteristics. Then, it obtained triple band characteristics of the proposed antenna. We adjusted and optimized the lengths and width of the three microstrip lines and one inserted stub to obtain the required impedance bandwidth for this paper. The proposed antenna has $23.0mm(W){\times}53.1mm(L1)$ on a dielectric substrate of $24.0mm(W1){\times}60.0mm(L){\times}1.0mm$ size. From the fabrication and measurement results, bandwidths of 158 MHz (841 to 1000 MHz) for 900 MHz band, 630 MHz (2.32 to 2.95 GHz) for 2400 MHz band, and 1,040 MHz (4.95 to 5.99 GHz) for 5000 MHz band were obtained based on the impedance bandwidth. The fabricated antenna also obtained the measured gain and radiation pattern characteristics in the required triple band of the proposed antenna.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.33-40
• /
• 2019

In this paper, a microstrip-fed triple-band antenna for WLAN system with microstrip lines was designed, fabricated and measured. The proposed antenna is composed of two strip lines and slit in the ground plane and then designed in order to get triple band characteristics. We carried out simulation on $L_3$, $L_{10}$, and slit parameters, and adjusted the parameters of the proposed antenna to satisfy the required frequency band and bandwidth. The proposed antenna is made of $32.0{\times}44.0{\times}1.0mm$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shows that the proposed antenna obtained the -10 dB impedance bandwidth 120 MHz (890 MHz~1.01 MHz), 440 MHz (2.35~2.79 GHz), and 1,280 MHz (5.07~6.35 GHz) covering the triple WLAN bands. Also, the measured gain and radiation patterns characteristics of the proposed antenna are presented at required frequency band, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.475-482
• /
• 2019

In this paper, we propose a triple band antenna for GPS / DCS / WLAN system. The proposed antenna has the characteristics required by considering the interconnection of two strip lines and various slits on the ground place. The total substrate size is $31mm(W1){\times}50mm(L1)$, thickness (h) 1.6 mm, and the dielectric constant is 4.4, which is made of $22mm(W7+W12+W8){\times}43mm(L4+L3)$ antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 340 MHz (1.465 to 1.805 GHz), 480 MHz (2.155 to 2.635 GHz) and 1950 MHz (4.975 to 6.925 GHz) were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1037-1044
• /
• 2021

In this paper, we propose DLP(Dual Linear Polarization) array antenna for 3.5 GHz band. The proposed antenna has 1×4 array antenna and design two port network. A cross shape is inserted at the bottom of the patch for impedance matching. The size of each patch antenna is 18.85 mm(W1)×18.85 mm(L1), array antenna is designed on the FR-4 substrate, which is 236.0 mm(W)×60.2 mm(L), thickness (h) 1.6 mm, and the dielectric constant is 4.3. From the fabrication and measurement results, bandwidths of 70 MHz (3.54 to 3.61 GHz) for input port 1, 75 MHz (3.55 to 3.625 GHz) for input port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is under the -20 dB. Also, cross polarization between two port obtained.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.759-766
• /
• 2022

In this paper, we propose a multi-band small antenna with CPW(Coplanar Waveguide) feeding structure WLAN(Wireless Local Area Network) and WiMAX (Worldwide Interoperability for Microwave Access) bands. The proposed antenna is designed two slit in the modified monopole type radiator and FR-4 substrate, which is thickness 1.0 mm, and the dielectric constant is 4.4. The size of proposed antenna is 15.1 mm⨯16.41 mm, and total size of proposed antenna is 17.5 mm⨯16.4 mm. From the fabrication and measurement results, From the fabrication and measurement results, bandwidths of 439 MHz (2.06 to 2.499 GHz), 840 MHz (3.31 to 4.25) and 1,315 MHz (5.23 to 6.545 GHz) were obtained on the basis of -10 dB impedance bandwidth. Also, 3D radiation pattern characteristics of the proposed antenna are displayed and measured gains 2.24 dBi, 2.83 dBi, and 2.0 dBi shown in the three frequency band, respectively.