• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.260-265
• /
• 1999

멀티빔 음향측심기(Multibeam Echo Sounder)는 기존의 단빔 음향측심기(Singlebeam Echo Sounder)와 달리 탐사선 진행방향의 수직(Crosstrack)으로 해저면을 주사(Swath)하여, 한 번의 송수신(Ping)으로 다중의 빔 자료 - 수심, 후방산란된 음압(Backscattered Amplitude), 사이드 스캔 소나(Side Scan Sonar) 자료 - 를 취득하는 장비이다. 멀티빔 음향 측심기를 이용한 해저면 탐사의 경우, 수심이 변함에 따라 주사폭(Swath width)이 변화하고, 각 빔의 수평 해상도(Footprint)는 수심과 더불어 빔폭(Beam width)에 의하여 동적으로 변화한다. 멀티빔 음향 측심기는 해저면을 전역탐사 할 수 있을 뿐만 아니라, 연속된 음향 탐사를 통하여 이웃한 핑 사이에 발생하는 전방중첩영역(Endlap)과 이웃 측선(Trackline)을 따라 겹쳐지는 측방중첩영역(Sidelap)의 자료들을 이용하여 멀티 뎀 자료들의 전반적인 정확도 및 신뢰도를 평가할 수 있다. 본 논문은 수로 측량(Hydrographic Survey)에서 사용되는 멀티빔 음향 측심기를 운영하여 얻어진 측심 자료를 처리하는 알고리즘 개발에 관한 연구이다. 본 논문에서는 L3사의 Sea Beam 2100 벌티빔 음향 측심기를 대상으로, 멀티빔의 측심 원리와 해저 지형에 대한 일반적 이해를 통하여 획득된 측심 자료의 통계적 특성을 파악하고, 오측심된 수심 자료를 제거하는 방법을 제안하며, 측심 구간의 대표격자 크기를 결정하는 기준을 제시한다. 또한, 항공원격탐사에서 고도 추정시 사용되고 있는, 평균보간법, 가중평균 보간법과, 본 논문에서 제안하는 격자 대표값 선정 알고리즘(Gridding Algorithms)의 결과를 비교하고, 최종적으로 얻어지는 해저 수치지형모델(DEM, Digital Elevation Model)과 후방산란 영상을 제시한다. 빠른 한지형잔디들이 지표면을 피복하도록 하고 여름의 고온기와 장마시기에는 뿌리전단력이 우수한 이러한 초종들로 지표면이 피복되도록 하는 것이 이상적이라 생각된다. 4. 혼파처리간의 토사유출량을 비교한 결과 토사 유출 억제효과는 한지형과 나지형잔디들의 혼합형(MixtureIII)과 자생처리구(MixtureV), Italian ryegrass와 자생식물의 혼합형(MixtureIV)등에서 비교적 낮은 수치를 토사유출량을 기록하였다. 이러한 결과는 자생식물들이 비록 초기생육속도는 외래도입초종에 떨어지지만 토사유출의 억제효과면에서는 이들 외래초종에 필적할 수 있음을 나타낸다고 할 수 있겠다.중량이 약 115kg/$m^2$정도로 나타났다.소 들(환경의 의미, 사람의 목적과 지식)보다 미학적 경험에 주는 영향이 큰 것으로 나타났으며, 모든 사람들에게 비슷한 미학적 경험을 발생시키는 것 이 밝혀졌다. 다시 말하면 모든 사람들은 그들의 문화적인 국적과 사회적 인 직업의 차이, 목적의 차이, 또한 환경의 의미의 차이에 상관없이 아름다 운 경관(High-beauty landscape)을 주거지나 나들이 장소로서 선호했으며, 아름답다고 평가했다. 반면에, 사람들이 갖고 있는 문화의 차이, 직업의 차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로 더욱이 공간상에서는 뚜렷하게 경계

• Korean Security Journal
• /
• no.29
• /
• pp.223-249
• /
• 2011

In modern society, citizens' quality of life aspects of safety and crime prevention activities are actively considering the incidence of crime prevention in advance. It also can be quite important elicit the interest of who community members through effective crime prevention strategies. For crime prevention policies and techniques over time as more scientific and advanced methods are made. Today, A typical crime prevention strategies is private security zones and Crime Prevention Through Environmental Design (CPTED) is a corresponding to the new strategy. CPTED is a diversification can be called a crime prevention approach that emphasizes the principle of natural surveillance, access control, territoriality, activity support, maintenance and management. The defensible space of the space area related to crime prevention setting the activities of private security and CPTED determine. Also, the reality of crime prevention and protection should be considered space. The emphasis on proactive prevention of crime in modern society for the prevention of crime how to approach differing perspectives and disparate aspects of private security and CPTED. Technical and professional areas that overlap to some extent in a homogeneous aspect. Ultimately, CPTED is a crime prevention through space and environmental approach for crime. In addition, Ultimate goal of convergence, crime prevention, with the same or higher is required to study for the area after looking for the characteristics and limitations of private security and CPTED.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.9-17
• /
• 1999

Viscoelastic characteristics of cured phenolic resin/carbon fiber composite materials were investigated through glass transition and degradation reaction processes in the high temperature region up to $400^{\circ}C$. A typical glass transition of the cross-linked thermoset polymer was followed by irreversible degradation reactions, which were exhibited by the increasing storage modulus and loss modulus peak. A degradation master curve was constructed by using the vertical and horizontal shift factors, both of which complied well with the Arrhenius equation in light of the kinetic expression of degradation rate constants. Using an analogy to the Havriliak-Negami equation in dielectric relaxation phenomena, a viscoelastic modeling methodology was developed to characterize the frequency- and temperature-dependent complex moduli of the degrading thermoset polymer composite systems. The temperature-dependent relaxation time of the degrading composites was determined in a continuous fashion and showed a minimum relaxation time between the glass transition and degradation reaction regions. The capability of the developed modeling methodology was demonstrated by describing the complex behavior of the viscoelastic complex moduli of reacting phenolic resin composite systems.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.47-54
• /
• 1996

This paper deals with the electric field sensor and automatic measuring system of the time-varying space electric field produced by lightning discharges. The theoretical principle and the design rule of the measuring devices are investigated, and the semisphere-type electric field sensor and the signal process system are fabricated. From the calibration experiments, the frequency bandwidth of the measuring system ranges from 200 [Hz] to 1.56 [MHz] and the sensitivity is 0.96 [m V/V/m] as the amplification gain is 10. In addition, the electric field waveforms produced by lightning discharges are observed by the proposed electric field measuring system from June to August in 1995. The data is sampled with the time interval of 200 [ns] and is automatically recorded by transient signal analyzer(Necolet Pro 30), the resolution of which is 12 bit. And it is registered at personal computer. The electric field waveforms produced by intracloud discharge tend to be bipolar, with two or three narrow and fast rising pulses superimposed on the initial half-cycle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.850-857
• /
• 2013

The objective of this paper is to provide service continuity based on an efficient subchannel allocation in OFDMA systems. The resource management for handover are necessary to maintain the QoS requirements of different multimedia applications because the service continuity may be defected by some delay and information loss. Therefore we propose two subchannel management schemes applied to OFDMA systems. Firstly, a superposition allocation of interference subchannels is achieved by modifying a frequency reuse scheme, using co-subchannel interference principle. Secondly for handover applications, we suggest a novel subchannel reservation scheme to adjust the number of allocated channels, depending on the different characteristics and diverse quality of mobile multimedia applications. Simulation results show that the total throughput for the proposed method is increased up to 20% at average and peak arrivals and the handover failure rate is decreased to about 25%, as compared to the conventional method.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.291-299
• /
• 2003

The effect of temperature and soil confining stress on geosyntheic creep behaviour was studied by performing the temperature dependent confined creep tests for HDPE geogrid and geomembrane specimen. The visco-elastic creep coefficients of the geosynthetics were evaluated by the test results and it was proposed that the simple expressions for the instantaneous and limit creep strain of geosynthetics was considered as a function of temperature and confining stress on geosynthetics. Based on the time-temperature superposition principle, a master curve has been drawn for extrapolating tensile creep strains to longer time intervals(1$\times$10 $^7$min.∼1$\times$10$^{10}$min.). By using this master curves, the shift factors which can be used in establishing master curve considering confining stress on geosynthetics were carried out. Each tests was performed during 8,000∼12,000 min., with temperature ranging between 5$^{\circ}C$ and 4$0^{\circ}C$ and with confining stress ranging between 0 t/$m^2$ and 9 t/$m^2$.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.25-34
• /
• 2013

The paper reviews the state of art in the design of liquefaction processes for the production of liquified natural gas, and addresses key design aspects to be considered in the design and how these design issues are systematically reflected in industrial applications. Various design options to improve energy efficiency of refrigeration cycles are discussed, including cascaded or multi-level pure refrigeration cycles which are used for covering wide range of cooling temperature, as well as mixed refrigerant cycle which can maintain a simple structure. Heat integration technique has been used for graphically examining differences of commercial cycles discussed in this paper, while energy efficiency and economics of commercial liquefaction processes has been summarized. Discussion also has been made about how to select the most appropriate set of drivers for compressors used in the liquefaction plant.

• Proceedings of the KGS Conference
• /
• 2002.05a
• /
• pp.95-98
• /
• 2002

본 연구는 안동지역에 있어서 이른바 명당이라고 하는 음택 풍수 경관을 조사하여 그 형태와 특징을 살펴보고자 하였다. 안동문화원에서 펴낸 $\boxDr$안동의 분묘$\lrcorner$ 에 나오는 분묘를 대부분 조사하고 이를 형기론적 입장에서 형국으로 분류하였다. 태백산에서 소백산을 잇는 낙동정맥 살의 문수산(1206m)에서 하나의 지맥이 남쪽으로 흘러 태자산, 박달산, 오적산, 학가산(870m), 보문산(643m), 검무산(331m)을 이루어내어 안동의 서쪽 산줄기를 형성하며, 태백산에서 백병산, 일월산, 주방산(주왕산), 보현산, 황학산, 오산으로 이어지는 산줄기가 우측을 이루어내어, 이들 우백호와 좌청룡이 안동군 풍천면의 구담리에서 마주하게 된다. 그 사이로 안동군, 예안현 등이 입지하였다. 이러한 안동의 산세에 따라 낮은 구릉, 완만한 사면 및 높은 배후 산지가 전개되며 낙동강 본류와 지류가 흘러 다양한 형국이 나타나게 된다. 안동의 경우는 날짐승(봉, 학, 꿩), 꽃(모란, 연꽃, 칡넝쿨), 길짐승(닭), 들짐승(거북, 뱀), 물건(등잔, 가마솥, 밥상), 용, 달 등이 33개가 나타난다. 이들의 분포를 살펴보면 크게 낙동강 본류 이북 쪽에 집중한다. 이들 명당은 고도 상으로 해발고도 200미터 부근에 대부분 입지한다. 무릇 명당이란 안산과 조산을 넘어 득수가 잘 이루어져야 하므로 낙동강 본류를 중심으로 하고 그 지류를 향하여 분포하는 것은 당연하다 이들 명당의 형태와 공통된 특징을 살펴본 결과 명당은 반개방성, 중첩성, 안정성, 조화성, 균형성의 5가지 특징이 나타나는 곳이다. 이러한 명당의 특징은 태조산, 중조산, 소조산를 거쳐 주산 아래 산이 겹겹이 에워싸게 되고, 계곡물의 여러 줄기가 합수하고 물이 역류하지 않으며 잘 감아도는 곳으로 표현할 수 있다 이러한 명당의 기본적인 원리는 장풍(藏風)과 득수득파(得水得破)이다. 장풍과 득수란 '국'(局), 즉 산줄기와 수계로 이루어진 일정한 범위 속에 만물이 생태계 속에서 살아가는 모습인 '체형(體形)'의 의미가 나타나야 한다는 것이다. 그러나 이러한 의미는 시대에 따라 달라질 수 있는 것이다.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.1
• /
• pp.3-6
• /
• 2005

The failure of geogrids can be defined as an excessive creep strain which causes the collapse of slopes and embankments. In this study, the lifetime of knitted polyester geogrids was predicted by using SIM(Stepped Isothermal Methods using TTS principal) and statistical data analysis techniques. The results indicate that the creep strain was 8.74, 8.79, 8.80% with 2.16~2.20% of CV% at 75, 100, 114 years, respectively and the creep strain reaches 9.3% after 100 years of usage at $27^{\circ}C$ which meets the required lifetime(creep strain less than 10% after 100 years of usage) in the fields. The SIM method is shown to be effective in reduction of uncertainty associated with inherent variability of multi-specimen tests and shorter test times than conventional TTS(Time-Temperature Superposition).

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.156-160
• /
• 2013

A study on compressive creep behavior of ACM rubber for automotive engine gasket was performed using TMA thermal analysis. From the results of isothermal measurements with constant load of 1 N at several different temperatures of 160, 180, 200, and $220^{\circ}C$, compressive creep data at the given temperatures were obtained, and therefrom, shift factor ($a_T$) and master curve at reference temperature of $160^{\circ}C$ were obtained using time-temperature superposition principle (TTSP). $C_1$ and $C_2$ of WLF (Williams-Landel-Ferry) equation were calculated through the WLF plot as -1.107 and 11.571, respectively. From this, life time of ACM rubber at $120^{\circ}C$ was predicted as about 24,000 hrs.