• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.777-787
• /
• 2012

The transient analysis for the output voltage of a piezoresistive microaccelerometer takes a relatively high computation time because at least two iterations are required to calculate the piezoresistive-structural coupled response at each time step. In this study, the high computational cost for calculating the transient output voltage is considerably reduced by an approach integrating the mode superposition method and the least square method. In the approach, data on static displacement and output voltage calculated by piezoresistive-structural coupled simulation for three acceleration inputs are used to develop a quadratic regression model, relating the output voltage to the displacement at a certain observation point. The transient output voltage is then approximated by a regression model using the displacement response cheaply calculated by the mode superposition method. A high-impact microaccelerometer subject to several types of acceleration inputs such as 100,000 G shock, sine, step, and square pulses are adopted as a numerical example to represent the efficiency and accuracy of the suggested approach.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.117-126
• /
• 2014

In this paper, we propose an efficient algorithm which can relocate the datablock of an aircraft when it is overlapped. If the datablock which represents the aircraft information in the control display is overlapped, relocation without overlapping is necessary because it is difficult to control the air traffic in this situation. The proposed algorithm relocates the data block with minimum movement by considering the characteristics of datablock. The moving distance of minimum movement is calculated using the height or width of rectangle which is created during overlapping. And the moving direction of minimum movement is calculated by considering the directivity of the datablock. When the distance between the target symbol and datablock is distant enough, the relocation is carried out using the existing algorithm as a special case. The proposed algorithm shows improved performance in comparison with the existing algorithm due to the fact that it considers many different cases of the datablock.

• Environmental and Resource Economics Review
• /
• v.27 no.1
• /
• pp.29-66
• /
• 2018

This study constructs an energy-extended KLEM DB of 35 Korean industries, and estimates the elasticities of substitution under various nesting structures of production technologies. Unlike most existing studies that employed only three inputs, K, L, and E, we applied a dual approach where non-energy intermediate input M is also incorporated as a production input. Our dual approach which extended that of van der Werf (2008)'s 3-input model successfully identified and estimated the multi-nested production functions. We provide the estimates of the elasticities of substitution among 4 different energy sources as well. Our estimation results would be used for energy-environment model building for Korea.

• Korean Journal of Social Welfare Studies
• /
• v.47 no.4
• /
• pp.43-69
• /
• 2016

This study explored whether there are differences in the lives of the poor when they reside in areas with different socioeconomic conditions. Especially the poor living in areas with high poverty are the main focus here, so this study demonstrated their levels of neighborship and mental health. In order to analyze it, 2012 Korean General Society Survey(94 areas, 1,396 individuals) was used and the interaction effect between area poverty and individual poverty was found. As a result, the poor living in deprived areas reported higher social ties with neighbors than the poor living in wealthy areas. Furthermore, double poverty status also increased their psychological well-being level so that it suggested the poor community could be the supportive base for the poor in terms of mental health as well. The meanings of relationships the poor have in poor areas were discussed, and the implications were followed.

• Journal of Advanced Technology Convergence
• /
• v.3 no.3
• /
• pp.29-35
• /
• 2024

When we look at the history of lines, we see that with the beginning of human civilization, lines were engraved on cave walls or rock surfaces for religious, shamanistic meanings, or to leave records. As time passed, characters were invented, which were used as a means of expression and recording, and had a significant impact on painting. In the East, according to the philosophy of 'Wu Wei Zi Ran (無爲自然)', artists borrowed from nature to express their intentions on the canvas with lines, and sometimes wrote their impressions on the canvas before or after painting. Lines were regarded not just as simple boundaries but as manifestations of the energy that evokes the vitality of the subject. Drawing a single line was considered the first act of life newly born in the cosmic space. The line itself implies the depth of space and elements of expression. Many artists have developed lines using contemporary senses and materials based on theories found in literature. This study aims to research the concept of lines and the linear characteristics of the East and West through recorded literature and data, and to study works using the overlapping nature of lines as a modern expression method.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.7-13
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times, and estimation of the reliability and availability of a software product require quantification of a critical element of the software testing process : test coverage. This model called Enhanced non-homogeneous poission process (ENHPP). In this paper, exponential coverage and S-shaped model was reviewed, proposes the superposition model, which maked out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics for the sake of efficient model, was employed.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.214-218
• /
• 2006

Purpose: We describe a new technique of arthroscopic medial plication using pull-out suture with consideration of anatomical location of medial patellofemoral ligament for the treatment of acute or recurrent patellar dislocation. Operative technique: Under arthroscopic examination, sutures are passed through the medial capsule, at which medial patellofemoral ligament is located, from outside to inside of knee joint. Three guide wires are inserted from anterior surface of the patella to upper half of its medial border. Intraarticular portions of sutures are pulled out toward anterior surface of the patella through bony tunnels. Under appropriate tension, the sutures are tied after performing lateral retinacular release. Conclusion: As suturing medial patellofemoral ligament, this technique can maximize the effect of medial plication and can correct subluxation and tilt of the patella. It seems to be a minimally invasive, easy and effective method for the treatment of acute or recurrent patellar dislocation.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.2
• /
• pp.111-118
• /
• 2023

In this study, the feasibility of laser patterning on the surface of food packaging polymer film was confirmed, and the surface patterning process conditions of femtosecond laser were established. In addition, it was proved that the surface properties of the film can be changed and controlled through the fabrication of various patterned films on the surface of food packaging films such as HDPE, PP, and PET. Various patterned surfaces, including large-scale circular patterns induced by a single femtosecond laser pulse, roughness patterns achieved by overlapping single pulses by 30%, straight line patterns, roughness patterns obtained by overlapping straight line patterns, and grid patterns formed by intersecting straight line patterns were fabricated. The characteristics of the patterned HDPE, PP, and PET films, based on the surface pattern structure and size, were analyzed using SEM, AFM, and contact angle measurements. Compared to the surface of each control film without femtosecond laser patterning, the contact angles of the surfaces of large-area circular patterning HDPE and PP films, large-area roughness patterning HDPE and PP films by overlapping 30% of single pulses, and large-area roughness patterning PET film by overlapping rectilinear patterning were in the range of 27.1-37.5 degree. This indicated that the HDPE, PP, and PET films became more hydrophilic after patterning. On the other hand, the HDPE film patterned with a large-scale grid pattern exhibited a contact angle of 120.4 degree, indicating that the HDPE film became more hydrophobic after patterning. Therefore, films that have been changed to hydrophilic surfaces through patterning can be used in anti-fouling applications where proteins, cells, viruses, and other food materials do not adhere or are easily detached. In addition, if a superhydrophobic surface of 150 degrees or more is fabricated through more precise lattice patterning in the future, it will be possible to use it for superhydrophobic surface applications such as self-cleaning.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.316-322
• /
• 2002

The Orthogonal Frequency Division Multiplexing(OFDM) is a special case of multicarrier transmission, where a single data stream is divided into many subcarriers and transferred in a parallel way. It reduces the necessary bandwidth using the orthogonality between the subcarriers. Therefore it requires the transmission channel which has stable characteristic. When the delay spread of the channel exceed the guard interval, then the orthogonality of the subcarriers cannot maintain and as a result the system performance degrade. In this paper, the XCP-OFDM(OFDM using cross-handed Circular Polarization) system is newly proposed. This system divides the channel in order to eliminate the overlapping of subcarrier's spectrum by using cross-handed circular polarization. Therefore, the proposed XCP-OFDM system can improve the performance without increasing the guard interval. Both theoretical analysis and simulation results are described.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.165-173
• /
• 2006

Network Mobility Basic Support protocol enables mobile network to change their point of attachment to the Internet, but causes some problems such as suboptimal muting and multiple encapsulations. The proposed scheme, combining Prefix Delegation protocol with HMIPv6 concept can provide more effective route optimization and reduce the amount of packet losses and the burden of location registration for handoff. It also uses hierarchical mobile network prefix (HMNP) assignment and provides tree-based routing mechanism to allocate the location address of mobile network nodes (MNNs) and support micro-mobility. In this scheme, Mobility Management Router (MMR) not only maintains the binding informations for all MNNs in nested mobile networks, but also supports binding procedures to reduce the volume of handoff signals oyer the mobile network. The performance is evaluated using NS-2.