• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.139-145
• /
• 2006

LRE(Liquid propellant Rocket Engine) is one of the important parts to control the trajectory and dynamics of rocket. The purpose of control of LRE is to control the thrust according to requiredthrust profile and control the mixture ratio of propellants fed into gas generator and combustor for constant mixture ratio. It is not easy to control thrust and mixture ratio of propellants since there are co-interferences among the components of LRE. In this study, the dynamic model of LRE was constructed and the dynamic characteristics were analyzed with control system as PID control and PID+Q-ILC(Iterative Learning Control with Quadratic Criterion) control. From the analysis, it could be observed that PID+Q-ILC control logic is more useful than standard PID control system for control of LRE.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.3
• /
• pp.284-290
• /
• 2012

Cement Fineness Modulus (CFM) is a method of expressing the distribution of particle sizes of cement in numeric form. If CFM is controlled through crush process of cement without modifying the chemical components or mineral composition of cement, it is judged to be able to produce a cement satisfying various requirements because it is estimated to enable various approaches to cement such as high early strength, moderate heat, low heat cement and so on. Therefore, in this study, as basic research for manufacturing special cement utilizing the controls of CFM, the intention was to review the impacts of CFM on the fundamental properties of concrete. To summarize the result, as mixture characteristics of fresh concrete, ratio of small aggregate and unit quantity were gradually increased, securing greater fluidity, with an increase in CFM, while the amount of AE and SP were reduced gradually. In addition, setting time was delayed as CFM increased. Furthermore, compression strength was relatively high during initial aging as CFM became smaller, but as time passed, compression strength became smaller, and it showed the same level of strength as aging time passed about three years.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.3
• /
• pp.325-335
• /
• 1994

The spinel $MgO.Al_20_3$ single crystals were grown by FZ (floating zone) method. Its melting point is about, $2135^{\circ}C$ and is important to the process of the growth from the melt. There have been some reports of the growth by Czochralski and Verneuil method. However, this study is the first trial to the spinel crystal with the application of FZ method. In this study, $MgAl_2O_4$ spinel crystals were grown by using FZ method which uses the ellipsoidal mirror furnace having infrared halogen lamps as a heat source. With dopants of transition metal ions, it was possible to melt the feed rod which does not absorb the infrared rays due to the transparent properties to infrared ray of spinel itself and the red, green and blue colored spinel single crystals could be grown more easily. As a conclusion, the purpose of this study is to find the spinel single crystal growth mechanism with respect to th growth interfaces and molten zone stability and to characterize the state of growth resulting from the concavity to the melt of interfaces.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.83-90
• /
• 2006

In this paper, we propose a new design method for a robust vector quantizer that is independent of the statistical characteristics of input images in the wavelet transformed image coding. The conventional vector quantizers have failed to get quality coding results because of the different statistical properties between the image to be quantized and the training sequence for a codebook of the vector quantizer. Therefore, in order to solve this problem, we used a pseudo image as a training sequence to generate a codebook of the vector quantizer; the pseudo image is created by adding correlation coefficient and edge components to uniformly distributed random numbers. We will clearly define the problem of the conventional vector quantizers, which use real images as a training sequence to generate a codebook used, by comparing the conventional methods with the proposed through computer simulation. Also, we will show the proposed vector quantizer yields better coding results.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.3
• /
• pp.81-88
• /
• 1990

For the protectioon of radioactive leakage, the quality control of main concrete structure in nuclear power plants is very important. So, this studey is designed to analyze the influence of kind of cement and aggregate on the mechanical properties of high density concrete. Test results of this study are as follows; 1)The slump of magnetite aggregate concrete(MAC) is found half value of nat.ural aggregate concrete (NAC). 2)As the effect of cement, the compressive strength of concrete using moderate heat cement is found higher 5-19 % than that of ordinary portland cement. 3)As the effect of fine aggregate, t.he compressive strength of MAC is found higher than that. of NAC below 340kg/$cm^2$ and lower t.han NAC above 340kg/$cm^2$. 4)As the effect of coarse aggregate, the compressive strength of MAC is found higher 17-22% than that of NAC.

• Korea journal of population studies
• /
• v.22 no.1
• /
• pp.93-121
• /
• 1999

이 연구는 인천의 정체성을 알아보는 데 연구의 초점을 맞추었다. 연구방법으로는 실증적 방법과 민속학적 방법 두 가지를 병행하였다. 시민단체, 공무원, 학생을 대상으로 임의목적표본방법을 사용하여 총 613명이 분석되었다. 분석방법은 교차통계분석 및 다중분류분석을 하였다. 정체성은 한 지역에 거주하는 주민들의 집단결속력과 성취도를 결정하여 주며, 그 지역의 사회적 통합과도 밀접한 관련을 지니고 있어서, 지역의 문제나 관심사를 해결하고 발전시키는데 가장 핵심적인 요소이다. 인천의 정체의식은 세 집단 모두 낮으며, 전체응답자의 절반 이상은 그저 그렇다는 중용의 의견이었다. 인천에 대한 정체의식을 응답집단의 특성별로 보면 여자보다는 남자가 높고, 기혼자보다는 미혼자가 높으며, 30세 이상으로 연령이 많을수록, 수입과 생활수준이 낮을수록 정체의식이 상대적으로 높게 나타났다. 그리고 전문.관리.사무직보다는 판매.서비스.생산.농업직 종사자들의 정체의식이 높았다. 전문대 정도의 교육을 받은 시민의 정체의식이 상대적으로 높고, 인천의 문화.복지.환경개선을 위한 특별기금 기부의사가 있는 시민과 인천을 마음붙이고 살 곳으로 생각하는 시민의 정체의식이 높다. 총괄적인 의미에서 본 인천의 정체성에 관한 조사를 보면, 인천은 "주인의식 없음"과 "이제부터 만들어 가야 한다"는 답변이 제일 많았고 그 다음은 "포용력", "선구적 개척정신", "긍정적인 의미의 짠물", "합중시(合衆市)적 다양성", "외세에 대한 호국정신", "세계의 관문도시"로 나타났다. 이와 같은 응답유형으로 보아서는 인천지역에 대한 이미지를 한마디로 딱 잘라 말하기는 어렵다. 그러나 인천은 서울.경기인, 충청인, 호남인, 영남인, 이북인, 외국인 등을 가리지 않고 받아드리는 "포용력이 있는 합중시적 다양성을 가진 도시"로 지역차가 서로 다른 출신성분이 공존할 수 있다는 점에서 의미하는 바가 크다. 이는 "세계속의 도시"와 "동북아의 거점도시"를 추구하는 미래지향적인 시각에서는 지역주의를 지양하고 지역통합이슈와 세계화 물결속에서 외국인에게도 열린 상태문화를 제공하는 관문이 될 것이라는 면에서 인천이 추구해야 할 정체성으로 시사하는 점이라고 본다.는 미래지향적인 시각에서는 지역주의를 지양하고 지역통합이슈와 세계화 물결속에서 외국인에게도 열린 상태문화를 제공하는 관문이 될 것이라는 면에서 인천이 추구해야 할 정체성으로 시사하는 점이라고 본다.

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.397-407
• /
• 2007

골형성 유도 단백질(bone morphogenetic protein, BMP)은 성장이나, 골형성과정에서 중용한 역할을 한다고 입증되었고 그것의 운반체에 대한 연구가 이뤄져 왔다. 하지만 수직압이 존재하는 곳에서 골증대술에 적용할 수 있을 만큼 강한 공간유지능력이 있는 운반체에 대한 연구는 그리 많지 않았다. Macroporous biphasic calcium phosphate block (MBCP block)은 공간유지능력이 뛰어나며 강한 수직압을 견딜수 있는 골대체물질이다. 이 연구의 목적은 MBCP block을 골형성유도 단백질(rhBMP-2)의 운반체로 사용하여 백서 두개골 결손부에 적용하였을 때, 골 형성 효과를 평가하는 것이다. 36마리의 웅성백서에서 8mm 지름을 갖는 임계크기의 두 개부 결손을 형성하였다. 20마리씩 2개의 군으로 나누어 MBCP block만 이식한 군, MBCP block을 운반체로 사용하여 농도 0.025mg/ml rhBMP-2를 이식한 군으로 나누어 술 후 2주와 8주에 치유결과를 조직학적, 조직계측학적으로 비교 관찰 하였다. 조직계측학적 관찰 결과, rhBMP-2/MBCP block 군에서 MBCP block군에서 보다 2, 8주 모두 골밀도(bone density)가 유의성있게 증가하였다 (P<0.01). 각 군에서도 8주째가 2주째보다 골밀도가 유의성있게 증가하였다(P<0.01). 총조직 형성량 (augmented area)에서는 변화가 없었다. 이 연구 결과, 백서 두개골 결손부에서 MBCP block은 rhBMP의 운반체로 사용하였을 때 신생골 형성에 유의한 효과가 있을뿐 아니라 공간유지능력이 우수해서 수직압이 존재하는 골증대술(bone augmentation)시 rhBMP의 운반체로 가능성이 있다고 사료된다.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.311-320
• /
• 2011

This study analyzed the persuasive marketing communication strategy which applied by showhost for TV homeshopping sales. Specifically, the current study focuses on the comparative analysis of tangible goods and intangible goods sales. Four sales homeshopping TV programs were selected for analysis: two overseas travel package products, one climbing clothes product and one produce of walnut. The method of rhetorical content analysis was conducted to analyze the strategy of persuasive communication. The results shows that , , were commonly used for both tangible and intangible products sales. But , , and were heavily utilized only for intangible products sales. The result of this study can contribute to provide theoretical background for future advanced research, although it has a limitation of only analyzing four sales programs.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.4
• /
• pp.243-252
• /
• 2016

In this paper, the incoherent reverberation model based on coupled normal mode method is presented. In the range dependent environment, one way coupled normal mode method is used to calculate the pressure from a source to a scatterer patch and the pressure from a scatterer patch to a receiver. For the computational efficiency, the sound propagation from a source/receiver to the scatterer patch is assumed to occur only in the 2D plane where a source/receiver and scatterer patch are located. For the model verification, problems of the reverberation modeling workshop I and II sponsored by the US office of Naval Research are calculated and the results are compared with the incoherent reverberation model results based on the ray method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.453-460
• /
• 2008

This paper proposes a new multi-output LLC resonant converter by using single control IC, which has the tight-regulated dual output voltage without additional power devices and controller. The proposed converter has master and slave outputs, of which regulations are achieved by the PWM(pulse width modulation) and PFM(pulse frequency modulation), respectively. Different from the conventional dual-output LLC resonant converter, the proposed converter has no additional post-regulators like a boost converter. Therefore, it features a low cost, small size, and high efficiency. To confirm the validity and prove the superiority of proposed converter, simulated and experimental results on a 50" FHD PDP power set prototype are presented.