• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.565-573
• /
• 2000

In this paper, a interdigital microstrip bandpass filter is designed. A interdigital microstrip bandpass filter has many advantages such as insertion return loss, lower return loss, higher frequency selectivity and smaller in size in comparison with the conventional coupled line filter. A interdigital microstrip bandpass filter consists of quasi TEM-mode strip line resonators between parallel ground plant. Each resonator element is a quarter wavelength long of the center frequency and is short circuited at one end and open circuited at the other end. In the filter design, Ensemble software is used. Experimental results show that the bandwidth of interdigital microstrip bandpass filter is 2.52GHz, insertion loss is -1.8dB and return loss is -17.0dB at 11.20Hz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.557-564
• /
• 2000

A microstrip band-pass filter using cross-coupled resonators is designed and studied experimentally. The cross-coupled microstrip hairpin resonator filters exhibit ripples in both passband and stopband. These ripples can improve both frequency selectivity and insertion loss. The cross-coupled filters are not only simple and compact in configuration, but also have great flexibility to form filters into a variety of size. In this paper, a microstrip band-pass filter using cross-coupled resonators is designed at the center frequency of 1.8GHz with bandwidth of 5.0% using Ensemble software. The experimental results show that the bandwidth is about 4.53% at 1.8GHz.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.43-51
• /
• 1987

In this work an implementation of SAW based serial type AWQPSK modulator is studied. The SAW AWQPSK modulator consisting of input apodized IDT and output uniform IDT with center frequency of 20 MHz and bit rate of 4MHz has been designed and fabricated on $YZ-LiNbO_3$ substrate. Measured center frequency and null-to-null bandwidth are 20MHz, respectively. The sidelobe suppression is achieved 60dB below the peak mainlobe level. Measured responses meet the theoretical values with tolerable amount of deviation. SAW-based modulator simplifies the implementation of AWQPSK which uses complex pulse shape as a baseband pulse.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.3
• /
• pp.24-30
• /
• 1990

In this paper, meander line type EMAT(Electro-Magnetic Acoustic Transducer) has been designed and fabricated with effective properties for detecting flaw existing within one wavelength in depth, and its characteristics have been analyzed. For the purpose of getting effective dynamic and static magnetic intensity, the coil has been arrayed using wire with interval of 0.75 mm and width of 0.65 mm and permanent magnets with 1500 Gauss have been constructed respectively. The center frequency and fractional bandwidth of the fabricated EMAT was 2 MHz and 36% respectively and its impulse response has been measured by non-contacting technique(the distance between the conducting media and the coil was 0.15mm). In the measuring results, it has been shown that Insertion Loss(IL) was 45.46dB and it was good agreement with theoretical result.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.6
• /
• pp.1-6
• /
• 1989

Narrowband bandpass weveguide filters using inductive post obstacles in rectangular waveguide are designed and constructed to have an equal-ripple bandwidth of 50MHz (0.56% fractional band-width) at a center frequency of 9GHz. Both the triple-post and the single-post configurations are realized and compared. The measured center frequency, bandwidth, and attenuation characteristics for both filters show good agreement with the theoretical calculations. When the two filters are compared, the insertion loss characteristic of the triple-post filter is better than that of the single-post filter by 0.8dB at the passband.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.528-531
• /
• 2003

본 논문에서는 LTCC 공정을 이용한 블루투스 주파수 대역($2,400{\sim}2,4835 MHz$) 에서 사용 할 수 있는, 헬리컬 구조의 소형 칩 안테나를 설계하였다. 안테나 본체 사이즈는 소형 단말기 내부에도 무리없이 삽입 할 수 있을 정도인 길이 3.2mm, 폭 1.6mm, 두께 1.2mm, 유전율 5.5를 가진 초소형 사이즈이다. 따라서 본 연구는 중심주파수가 2.45GHz로 하는 단일밴드 블루투스 안테나에 대해 고찰하고, 목표로 정한 특성은 중심주파수에서 약 100MHz 대역폭을 갖일수 있도록 하는 것이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.676-685
• /
• 2001

In this paper, the design method of the meander-coupled Wilkinson power divider with slit is proposed. Because the electrical performance of this structure is varied with each coupling distance and the slit's size, a tedious design work, which is done by trial and error correction, is required to determine the values of parameters for the best suitable operation. To solve this problems, therefore, an experimental design formulas for optimum performance are presented by curve fitting, under the desired center frequency($f_0$). As the example using the proposed design equation, we designed and fabricated the meander-coupled divider at $f_0$=1.5 GHz. It has better electrical performance and measured results also agrees very well that of the simulated. From these observation, it can be concluded that the obtained design formulas are useful for design of this divider.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.69-76
• /
• 2000

In this research, with the FEM we analyzed the variation of the sound pressure and thermal distribution of a Class IV Flextensional transducer in relation to its material properties and structures. Based on the results, we determined optimal structure of a Class IV Flextensional transducer that had maximum sound pressure, minimum thermal distribution, and 1 kHz resonance frequency. The sound pressure by the optimal structure is higher than that of the basic structure by two times, and the thermal distribution is much lower. Results of the present work can be utilized to design Class IV Flextensional transducers of various resonance frequency, maximum sound pressure, and minimum thermal distribution.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.502-508
• /
• 2013

In this paper, 2D array transducers using a conductive backer similar to 1-3 composites have been designed, fabricated, and evaluated. The conductive backer was based on well known manufacturing process of 1-3 composites with affordable ingredients. The 2D array transducer had 4,096 elements designed to have 3.5 MHz center frequency and a fractional bandwidth over 60 %. Fabricated prototype of the transducer satisfied the specifications in the center frequency and bandwidth. Performance over the entire elements was so uniform that the standard deviation was less than 0.81 dB. Thus applicability of the conductive backer proposed in this work to 2D array transducers was verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.505-513
• /
• 1996

In this paper the dual-mode bandpass filters with a Chebyshev response are designed and manufactured at Ku-band as well as K-band. Manufactured filters are resonated by two independent orthogonal $TE_{113}$ circular-cavity modes and characterized by 4-pole Chebyshev function. One is operating at a center frequency of 12.5GHz with a bandwidth of 100MHz and the other, a center frequency of 19.25GHz with 120MHz, respectively. The measureed experimental results of a 12.5GHZ dual-mode filter ahve a 1.2dB intertion loss in the passband and 65dB out-of-rejection, and a 19.25GHz filter has a 1.55dB insertion loss and 70dB out-of-rejection. These experimantal results shoults show good agreements with the design specifications.