• Title/Summary/Keyword: 중심 주파수

Search Result 1,211, Processing Time 0.039 seconds

CR 기술 응용사례: 미국 TV Whitespace 서비스모델

  • Kim, Gi-Hong;Hwang, Seong-Ho;Min, Jun-Gi
    • The Magazine of the IEIE
    • /
    • v.36 no.6
    • /
    • pp.52-63
    • /
    • 2009
  • 2004년 이후 미국 IEEE802 표준화 기구에서는 지역별로 사용되지 않는 유휴 TV 방송채널을 비면허 방식 무선접속 서비스용도로 사용하기 위한 기술표준 및 서비스모델 제정 작업이 진행되고 있다. 작은 전파감쇄 특성과 높은 전파투과 특성을 지니는 방송대역 주파수를 활용한 서비스로는 일반적인 이동통신망의 기지국 커버리지 보다 넓은 지역을 커버하는 무선 지역접속망(WRAN)부터 확장된 형태의 무선랜에 이르기까지 다양한 모델이 논의되고 있다. 본 고에서는 미국을 중심으로 논의되고 있는 서비스모델을 중심으로 기술적, 사업적 관점에서 고려될 수 있는 다양한 서비스모델에 대하여 논하고자 한다.

  • PDF

The Design of the Class E Swiching Frequency Multiplier (스위칭 모드 E급 주파수 체배기 설계)

  • Roh, Hee-Jung;Seo, Choon-Weon
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.23 no.10
    • /
    • pp.90-99
    • /
    • 2009
  • In this paper, we proposed the new class-E frequency multiplier design that include the highest efficient characteristics. The proposed frequency multiplier is designed for 5.8[GHz] output using the frequency multiplier about 2.9[GHz] input signal. And studying in this paper is for the design and the implementation of the class E frequency multiplier. For the result, the maximum highest efficient characteristics 32[%] which is with output power 24.5[dBm] and 8.5[dB], is shown with frequency multiplier for the 2.9/5.8[GHz] class E. And we applied the linear method to the implemented class E frequency multiplier. As a result, the output spectrum for the linear is upgrade to 12[dB], 12[dB], 13[dB] of the ACPR characteristics on the +11[MHz], +20[MHz], +30[MHz] offset frequency in the center frequency. The result is satisfied with the 3.83[%] of the lineared EVM for the 64-QAM modulated method with the 54[Mbps] transmission velocity. In this paper, we show that the good compensation result of the linearity and the efficiency through the digital pre-linear method of the distortion with the frequency multiplier. Therefore, we suggested the frequency multiplier method are applying to WLAN, cellular, PCS, WCDMA, and etc.

A Frequency-Sharing Method to Use Frequency Resources Efficiently (효율적인 주파수 이용을 위한 주파수 공유 방법)

  • Kang, Sang-Gee;Hwang, Taek-Jin
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.8
    • /
    • pp.1349-1355
    • /
    • 2008
  • Recently many short-range transceiver systems, such as ZigBee, Bluetooth and RFID(Radio Frequency Identification), have been developed. These systems are mostly low-power transceivers. In the near future many more low-power transceivers are appeared for WPAN(Wireless Personal Area Network) and interference mitigation technologies are necessary to the low-power transceivers for using frequency resources efficiently. In this paper we consider two methods for sharing frequency resources. The first case is that a frequency band previously assigned fer a certain system is shared and the second case is that the white frequency band is shared. We study the method and conditions for sharing frequency resources in the above two cases. When a frequency band is shared with ZigBee, RFID, DCP (Digital Cordless Phone) and Bluetooth as an example for the first case, the sharing conditions are investigated and the results are presented. We propose a balancing factor to maintain an equal transmitting conditions between systems having a different interference mitigation technique. In the interference simulation we use FH(Frequency Hopping) as a reference system and 0.9 of a balancing factor for LBT(Listen Before Talk) and 0.8 for DS(Direct Spreading). From the simulation results we know that a balancing factor reduces interference probability therefore many more systems can be operated in the same frequency bands compared with the case without using a balancing factor.

The research of wide band vibration energy harvester using ocean wave (파도를 이용한 광대역 진동에너지 하베스터에 대한 연구)

  • Han, Ki-Bong;Lee, Hyoung-Woo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.37 no.6
    • /
    • pp.596-602
    • /
    • 2013
  • In general, existed vibration energy harvester is optimum in electronic energy gleaned from vibration energy with fixed single frequency, because it is using resonance. But it is limit in electronic energy gleaned from ocean wave energy with variant frequency. This paper studied for width band vibration energy harvester that obtains electronic energy from ocean wave with infinite vibration energy in order to solve it. It is composed of buoy to occur resonance in the center frequency of ocean wave energy and the vibration system to occur resonance in the same frequency. As a result, existed vibration energy harvester using resonance maximized electronic energy conversion efficiency in single frequency, while proposed width band vibration energy harvester has merit that maximized electronic energy conversion efficiency in ocean wave with variant frequency.

Design and Implementation of Antennas for UWB Communications (UWB 통신을 위한 안테나 설계 및 구현)

  • Chae, Jeong-Sik;Ham, Jong-Wan;Jeong, Dae-Ryeong;Jung, Hoe-Kyung
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2011.05a
    • /
    • pp.497-498
    • /
    • 2011
  • In 21 century, we use a variety of new wireless technologies focuses on broadcasting and Communications. Because of widely spread wireless-service, demand a lot of frequency. It requires various wireless access technologies. Especially UWB, SER, Millimeter Wave etc. Among them, UWB can use wide Frequency band, because it is different from Non-traditional approach which Frequency Band Using the exclusive rights granted by. Furthermore, it does not cause interference to other existing frequency, therefore this technology is attracting attention. In this paper, describe study on a UWB technology, design about useable antenna for UWB communication.

  • PDF

A Study on Rectangular Planar Monopole Antenna with a Double Sleeve Using Half Cutting (하프 커팅을 이용한 이중 슬리브를 갖는 직사각형 평면 모노폴 안테나에 관한 연구)

  • Kang, Sang-Won;Chang, Tae-Soon;Choe, Gwang-Je
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.17 no.2
    • /
    • pp.257-262
    • /
    • 2017
  • In this paper, we proposed a rectangular planar monopole antenna with a double sleeve that applied to a half-cut and a discontinuous feed structure. A rectangular planar monopole antenna with a double sleeve was cut in half along the magnetic symmetry line, and impedance matching was achieved by a discontinuous structure was applied to a feeder and by adjusting the double sleeve gap. We used the HFSS simulator of ANSYS company to confirm the antenna parameter property, and the antenna size was $21{\times}40mm^2$. In the proposed antenna, the simulation frequency range with VSWR of 2 or less was 2.6GHz to 10.25GHz. The bandwidth was 7.65GHz. The frequency range of the fabricated antenna was 3.3GHz to 9.75GHz, and the bandwidth was 6.45GHz. The measured radiation pattern frequencies were 3.5GHz, 5.5GHz, 7.5GHz, and 9.5GHz. A radiation pattern similar to the dipole antenna pattern was obtained at all frequencies.

The development of laser doppler vibrometer using DPLL for the detection of ultrasonic vibration (Digital PLL을 이용한 초음파진동 측정용 레이저 도플러 진동계의 개발)

  • 김호성
    • Korean Journal of Optics and Photonics
    • /
    • v.11 no.5
    • /
    • pp.306-311
    • /
    • 2000
  • This paper deals with the development of Laser Doppler Vibrometer (LDV) that can mea~ure the tlequency and amphlude of the ultrasonic vibralion. Hc-Ne laser (632.8 om) is used as a light source, and Michelson interferometer in winch frequency of the objective beam is shIfted by Bragg cell IS adopted The frequency modulated signal centered at 40 MHz flom the PIN diode IS amplified. down-col1vel1ed to 2.5 MHz, filtered and digiLized. The voltage output that is proportional to the velocity of the vibratwg surface is obtawed using digItal PLL. A microprocessor is used to extract the frequcncy aud amplitude of the vibratIOn from the voltage output. It is found that the developed LDV can measure up to 300 kHz vibratIOn and the mlillmUITI measurable amplitude is I nm at 300 kHz. We believe thatlhis LDV can be used to measure the vibratIOn of the heavy electric maclllnery and micro-size structures. tures.

  • PDF

5G 통신 기술

  • Bang, Seung-Chan
    • Information and Communications Magazine
    • /
    • v.32 no.5
    • /
    • pp.73-86
    • /
    • 2015
  • 본고에서는 먼저 서비스 측면에서 사용자 중심인 모바일인터넷과 기기 간 통신인 사물인터넷 서비스, 단말 측면에서 안경단말기, HMD(Head Mounted Display), 드론, 스마트센서, Connected Car가 어떻게 5G 통신의 견인차 역할을 하는 지 알아보고, 5G서비스와 단말을 수용하는 코어와 무선액세스 네트워크 구조 및 중요 기술에 대해 설명한다. 또한, 5G 주파수 소요량 분석 및 선정을 위한 ITU-R 동향에 대해서도 간략히 알아본다.

샤논(1948)을 넘어

  • Lee, Mun-Ho
    • Information and Communications Magazine
    • /
    • v.28 no.11
    • /
    • pp.66-75
    • /
    • 2011
  • 본고에서는 아인슈타인(1905) 특수상대성이론과 샤논(1948)의 정보이론의 탄생배경 중심으로 유도하였고, 이 아름다운 두 식을 비교, 설명하였다. 4G 무선 이동통신의 주파수 스펙트럼 효율을 증가시키기 위해, MIMO를 쓰고 샤논 캐퍼시티에 접근하기 위해 새로운 채널코딩 기술을 쓰고 있다. 모두 샤논의 손바닥 안에 있다.