• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.176-185
• /
• 2005

Purpose: Film dosimetry as a part of patient specific intensity modulated radiation therapy quality assurance (IMRT QA) was peformed to develop a new optimization method of film isocenter offset and to then suggest new quantitative criteria for film dosimetry. Materials and Methods: Film dosimetry was peformed on 14 IMRT patients with head and neck cancers. An optimization method for obtaining the local minimum was developed to adjust for the error in the film isocenter offset, which is the largest part of the systemic errors. Results: The adjust value of the film isocenter offset under optimization was 1 mm in 12 patients, while only two patients showed 2 mm translation. The means of absolute average dose difference before and after optimization were 2.36 and $1.56\%$, respectively, and the mean ratios over a $5\%$ tolerance were 9.67 and $2.88\%$. After optimization, the differences in the dose decreased dramatically. A low dose range cutoff (L-Cutoff) has been suggested for clinical application. New quantitative criteria of a ratio of over a $5\%$, but less than $10\%$ tolerance, and for an absolute average dose difference less than $3\%$ have been suggested for the verification of film dosimetry. Conclusion: The new optimization method was effective in adjusting for the film dosimetry error, and the newly quantitative criteria suggested in this research are believed to be sufficiently accurate and clinically useful.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• The Korean Journal of Applied Statistics
• /
• v.12 no.2
• /
• pp.671-681
• /
• 1999

이항분포의 정규근사는 중심극한정리의 한 예로서 자주 언급되는데 정규근사를 하기 위한 시행회수 n과 성공률 p에 대한 판정기준들이 다수 제시되고 있는 데, 본 논문은 이러한 판정기준들에 대하여 제약조건의 강도와 평균오차한계를 비교, 검토하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.167-173
• /
• 2013

Purpose: This study is to evaluate the efficacy of the CBCT and EXACTRAC the image on the spine stereotactic body radiation treatment. Materials and Methods: The study compared the accuracy of the dose distribution for changes in the real QA phantom for The shape of the body of the phantom was performed. Novalis treatment artificially set up at the center and to the right, on the Plan 1 mm, 2 mm, 3 mm in front 1 mm, 2 mm, 3 mm and upwards 1 mm, 2 mm, 3 mm and $0.5^{\circ}$ by moving side to side Exactrac error correction and error values of CBCT and plan changes on the dose distribution were recorded and analyzed. Results: Cubic Phantom of the experimental error, the error correction Exactrac X-ray 6D Translation in the direction of the 0.18 mm, Rotation direction was $0.07^{\circ}$. Translation in the direction of the 3D CBCT 0.15 mm Rotation direction was $0.04^{\circ}$. DVH dose distribution using the results of the AP evaluate the change in the direction of change was greatest when moving. Conclusion: ExacTrac image-guided radiation therapy with a common easy and fast to get pictures from all angles, from the advantage of CBCT showed a potential alternative. But every accurate information compared with CT treatment planning and treatment of patients with more accurate than the CBCT ExacTrac the location provided. Changes in the dose distribution in the experiment results show that the treatment of spinal SBRT set up some image correction due to errors at the target and enter the spinal cord dose showed that significant differences appear.

• Journal of the Korean Society of Radiology
• /
• v.3 no.2
• /
• pp.23-26
• /
• 2009

This study proposed an improved center array-sequencing phase unwrapping (ICASPU) algorithm. 2% agarose phantom dopped with 0.6mM/l MnCl2 was used with clinical 1.5T MRI system and commercial knee coil. Obtained k-space data(raw-data) was transmitted to PC and reconstructed into phase image with MATLAB software. Previous center array-sequence phase unwrapping algorithm wascompared with proposed ICASP algorithm using second order regression analysis. As a result, we found that the amount of error on proposed ICASPU method is less about 5 times than that of previous CASPU method. In this study, we exploit improved Center array-sequence phase unwrapping algorithm and expect to apply to images including phase informations.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.281-287
• /
• 2014

The Winston Lutz test, which checks the accuracy of the isocenter for stereotactic radiosurgery (SRS), was performed with the commercial electronic portal imaging device (EPID). The usual Winston Lutz test with film was also performed for comparison with the test with EPID. The maximum difference in isocenter between the two methods was 0.32 mm. The Winston Lutz test using EPID is practical as it can reduce time and avoid human errors compared to the test with film.

• Journal of radiological science and technology
• /
• v.30 no.1
• /
• pp.33-38
• /
• 2007

The propose of this study is a verification of the correct calculation of the dose around source and the prescription dose of Ir-192 source in the plato treatment planning system. The source and orthogonal coordinates for lateral direction and those for the anterior posterior direction were drawn on a A4 paper and then input into the system. The prescription dose was prescribed to two points with radius 1 cm in the direction of polar angle $90^{\circ} and $270^{\circ} from the center of the source. The doses of prescription point and dose points acquired from the treatment planning system were compared with those from manual calculation using the geometry function formalism derived by Paul King et al. In this analysis, the doses of prescription point were exactly consistent with each other and those of dose points were obtained within the error point of 1.85%. And the system of accuracy was evaluated within 2% of tolerance error. Therefore, this manual dose calculation used for the geometry function formalism is considered to be useful in clinics due to its convenience and high quality assurance.

• Journal of Korean Society of Transportation
• /
• v.20 no.3
• /
• pp.55-67
• /
• 2002

구간검지체계를 기반으로 한 첨단교통정보제공시스템(Advanced Traveler Information Systems)은 그 기능 수행시 다음의 중요 고려사항을 지닌다. 첫째는 제공 정보의 신뢰성이며, 둘째는 정보수집비용에 관련한 수집자료수의 한계이다. 본 논문에서는 이러한 한계성 극복을 위해 보다 대표성 있는 교통정보 형태의 설정 및 통계적으로 신뢰성 있는 정보산출을 위해 요구되는 적정표본수의 결정에 대한 연구를 수행하였다. 도시고속도로(올림픽대로)와 도시간선도로(천호대로)의 실측 구간통행시간분포 분석결과 단일교차로 구간의 경우 다른 구간들의 단일봉(unimodal)의 정규분포형태와는 다른 두 개의 봉우리를 지닌 분포형태(bimodal)가 나타났다. 따라서 이러한 구간은 기존과는 다른 새로운 교통정보 형태가 필요하며, 본 논문에서는 모든 통과차량들의 평균통행시간으로 정의되는 한 개의 대표치가 아닌 신호주기에 의한 정지여부에 따라 분리되는 주행시간과 지체시간 또는 주행속도와 통행속도 개념의 세분화된 정보형태를 설정하였다. 또한 중심극한정리를 기초로 한 통계적인 표본수 결정식을 이용하여 설정된 신뢰수준 하에서의 정보산출을 위해 요구되는 적정 표본수를 산출하였다. 그 결과, 교통이 혼잡할수록 요구되는 표본수는 적어지는 것으로 나타났다. 우선 적정 표본수 만큼의 표본추출을 하고 제안된 정보산출 방법에 의해 교통정보를 산출한 후 실측치와의 오차를 비교하였다. 그 결과 산출된 교통정보는 신뢰수준 95%와 허용오차 5㎞/h를 만족하였다. 다음으로 구간검지체계를 이용하여 정보를 산출하는 타시스템 교통정보와의 오차율을 비교하였다. 그 결과, 실측치와 본 연구의 산출방법에 의한 교통정보, 로티스교통정보 및 차량번호판 인식시스템의 교통정보와의 비교 결과 제안된 교통정보형태의 타당성을 볼 수 있었다.

• Progress in Medical Physics
• /
• v.8 no.2
• /
• pp.19-26
• /
• 1997

3-dimensional Neuronavigator, Viewing Wand(ISG Technologies, Toronto, Cannda) is the surgery aid equipment for real time image (CT or MRI) guided surgery. The assurance of spatial accuracy of this system is important for clinical application. In this study, we have designed the acrylic brain phantom and measured the spatial error with that phantom. The phantom has designed to have capability to simulate image guided surgery. The phantom has 22 vertical rods whose diameters are 5mm and each rods has different length. CT scans were performed by 2.0mm slice and reconstructed for 3-Dimensional analysis. End point of rods can be obtained using reconstructed 3- Dimensional images and they are compared to actual position data. Average deviation was less than 2mm for various situations. Spatial error of Viewing Wand is acceptable in the clinical points of view, while cosmetics of the software needs to be modified to more user friend. Better accuracy can be expected when we apply the mixed fiducial fit registration and surface fit registration method. And even better results can be obtained if registration points distributed even and symetric around the target.

• Radiation Oncology Journal
• /
• v.25 no.1
• /
• pp.54-61
• /
• 2007

[ $\underline{Purpose}$ ]: The purpose of this study is to develop a practical method for determining accurate marker positions for prostate cancer radiotherapy using CT images and kV x-ray images obtained from the use of the on- board imager (OBI). $\underline{Materials\;and\;Methods}$: Three gold seed markers were implanted into the reference position inside a prostate gland by a urologist. Multiple digital image processing techniques were used to determine seed marker position and the center-of-mass (COM) technique was employed to determine a representative reference seed marker position. A setup discrepancy can be estimated by comparing a computed $COM_{OBI}$ with the reference $COM_{CT}$. A proposed algorithm was applied to a seed phantom and to four prostate cancer patients with seed implants treated in our clinic. $\underline{Results}$: In the phantom study, the calculated $COM_{CT}$ and $COM_{OBI}$ agreed with $COM_{actual}$ within a millimeter. The algorithm also could localize each seed marker correctly and calculated $COM_{CT}$ and $COM_{OBI}$ for all CT and kV x-ray image sets, respectively. Discrepancies of setup errors between 2D-2D matching results using the OBI application and results using the proposed algorithm were less than one millimeter for each axis. The setup error of each patient was in the range of $0.1{\pm}2.7{\sim}1.8{\pm}6.6\;mm$ in the AP direction, $0.8{\pm}1.6{\sim}2.0{\pm}2.7\;mm$ in the SI direction and $-0.9{\pm}1.5{\sim}2.8{\pm}3.0\;mm$ in the lateral direction, even though the setup error was quite patient dependent. $\underline{Conclusion}$: As it took less than 10 seconds to evaluate a setup discrepancy, it can be helpful to reduce the setup correction time while minimizing subjective factors that may be user dependent. However, the on-line correction process should be integrated into the treatment machine control system for a more reliable procedure.