• Magazine of the Korea Concrete Institute
• /
• v.5 no.1
• /
• pp.145-155
• /
• 1993

본 연구에서는 표면부를 에폭시 폴리머 모르터로 하고 , 중심부를 발포 폴리스티렌으로 하는샌드위치 패널을 제조하여, 표면부를 용접철강으로 보강한 경우와 보강하지 않은 경우에 대하여 4강 단순지지 조건에서의 정적 차 통해 하중-처짐, 휨모멘트-변형률, 파괴양상 등을 구명하였다. 단위중량, 극한가중, 휨모멘트는 중심부의 두께보다 표면부 두께에 더 큰 영향을 받으며 극한처짐은 보강안된 경우 표면부 보다 중심부 두께의 영향이 월등히 컸으마 보당된 경우는 표면부나 중심부 두께의 영향이 비슷하였다. 그러나 용접철망의 보강은 샌드위치 패널의 처짐억제 보다 인성증가에 기여도가 높은 것으로 나타났다. 샌드위치 패널의 파괴양상은 보강하지 않은 경우 선형파괴가 일어난데 비해 보강한 경우에는 방사상의 파괴가 일어났다.

• Journal of the Korean Society of Radiology
• /
• v.83 no.3
• /
• pp.645-657
• /
• 2022

Purpose To evaluate and compare the diagnostic outcomes of ultrasonography (US)-guided fine needle aspiration (FNA) and core needle biopsy (CNB) performed on the same thyroid nodule using a surgical specimen for direct comparison. Materials and Methods We included 89 thyroid nodules from 88 patients from February 2015 to January 2016. The inclusion criterion was thyroid nodules measuring ≥ 20 mm (mean size: 40.0 ± 15.3 mm). Immediately after surgical resection, FNA and subsequent CNB were performed on the surgical specimen under US guidance. FNA and CNB cytopathologic results on the specimen were compared with the surgical diagnosis. Results Among the 89 nodules, 30 were malignant and 59 were benign. Significantly higher inconclusive rates were seen in FNA for malignant than benign nodules (80.0% vs. 39.0%, p < 0.001). For CNB, conclusive and inconclusive rates did not differ between benign and malignant nodules (p = 0.796). Higher inconclusive rates were seen for FNA among cancers regardless of US features, and in the subgroup of size ≥ 40 mm (62.5% vs. 22.9%, p = 0.028). Eleven cancers were diagnosed with CNB (36.7%, 11/30), while none was diagnosed using FNA. Conclusion In this experimental study using surgical specimens, CNB showed a potential to provide improved diagnostic sensitivity for thyroid cancer, especially when a conclusive diagnosis is limited with FNA.

• Weed & Turfgrass Science
• /
• v.4 no.2
• /
• pp.124-128
• /
• 2015

Large patch, caused by Rhizoctonia solani AG2-2 IV, is a soil-born disease that is the most important of warm season turfgrass such as zoysia and Bermuda grass. This study was conducted to analysis of the soil microbial community structure on large patch. Center of the large patch (CLC), edge (CLE) and healthy (CLH) part of microbial communities were examined using metagenomics in Phylum level. Distribution trends of the rhizosphere microorganisms were similar to the order Proteobacteria, Acidobacteria, Chloroflexi, Firmicutes, Planctomycetes, Gemmatimonadetes, Nitrospira, Cyanobactria and Verrucomicrobia in soil collections. Contrastively Actinobacteria was more 56% abundant in healthy part soil (16%) than in the center (9.28%) or edge (10.84%) parts. Taxonomic distributions were compared among the CLC, CLE and CLH, total 6,948 OTUs were detected in the CLC, 6,505 OTUs for the CLE and 5,537 OTUs were detected in the CLE. Distributions of Actinobacteria OTUs were appeared 615 OTUs in the CLC, 709 OTUs in the CLE and 891 OTUs in the CLH. Among Actinobacteria, 382 OTUs were overlapped in the all soils. Not matched OTUs of CLH (286 OTUs) was detected 23 times higher than CLC (91 OTUs) and CLE (126 OTUs).

• Investigative Magnetic Resonance Imaging
• /
• v.6 no.1
• /
• pp.21-27
• /
• 2002

Purpose : To evaluate diffusion-weighted imaging findings of intracerebral hematoma according to the time sequence. Materials and methods : Seventeen patients with intracerebral hematoma were studied. Diffusion weighted images using 1.5 tesla MRI machine were obtained with b-value of $1000{\;}sec/\textrm{mm}^2$. The patients were grouped as hyperacute stage(within 12 hours, 5 patients), acute stage(within 3 days, 4 patients), subacute stage(within 3 weeks, 4 patients), and chronic stage(after 3 weeks,4 patients). The signal intensities were analysed as bright, high, iso, low and dark at the central and peripheral portions of the hematoma in each stage, and compared with those of T2 and T1 weighted images. Results : The signal intensities of the central and peripheral portion of the intracerebral hematoma on diffusion-weighted images were high and dark in hyperacute stage, dark and high-bright in acute stage, and high-bright and dark in subacute and chronic stages. The patterns of signal change of hematoma on diffusion-weighted image according to the time sequence were similar to those on T2-weighted image, but changed early and prominently. Conclusion : The intracerebral hematoma on diffusion-weighted image showed unique central and peripheral signal intensity according to the time sequence. Central portions show high to bright signals in hyperacute, subacute and chronic stage, and dark signal in acute stage, and peripheral portions show dark signals in hyperacute, subacute and chronic stage, and high to bright signal in acute stage.

• Clean Technology
• /
• v.15 no.4
• /
• pp.245-252
• /
• 2009

Profiles development of melt spinning process of poly(lactic acid) (PLA) was simulated via a numerical method and the radial temperature distribution was calculated using finite difference method. The spinning speed ranged from 1 km/min to 5 km/min was analyzed and the effect of spinning conditions on the radial temperature distribution was investigated. At low spinning speed, the difference between PLA and poly(ethylene terephthalate) (PET) was relatively small. As the spinning speed increased, the difference in velocity profile became prominent. PLA showed a slower spinning speed than PET and solidified more slowly. The temperature difference between the core and surface of the PLA filament reached 4.6 K, which was less than that of PET filament with a difference of 10.4 K. The radial temperature difference increased with increasing the cooling-air velocity and the spinning temperature.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.3 no.1
• /
• pp.49-57
• /
• 1989

고압 방전 아아크의 물리적 특성을 예측하기 위해서는 고압 방전 아아크의 특성을 근거로 한 타당성있는 모델이 고안되어야 한다. 광 에너지 분포의 계산방법을 상당히 개선하여 고압 방전 아아크의 분광학적 특성을 상세히 나타낼 수 있는 시불변 아아크 모델을 제시하였다. 그리고 계산 결과, 이 모델은 고압 방전 아아크의 물리적 특성을 비교적 잘 나타낸다는 사실을 알았고 아아크의 축 중심부의 온도가 높아질수록 나트륨의 공진선인 D 선보다 비공진선들의 방사 에너지가 많아지는 사실을 알 수가 있었다. 그러므로 축 중심부의 온도가 높아질수록 광원의 연색성이 개선된다는 사실을 예측할 수가 있었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.357-357
• /
• 2003

천안 및 대전을 포함하는 충청권은 향후 10년 내에 우리나라 정치, 행정의 중심부로 부각될 전망이다. 현재 충청권의 대기환경은 수도권에 비해 양호한 수준이나, 정치 및 행정의 요충지로 부각될때 악화 될수 있는 가능성을 내포하고 있다. 쾌적한 대기환경을 유지하는 행정 중심부로서의 역할을 위해서는 대기환경의 사전 평가를 통해 환경 친화적인 도시 건설이 설계되어야 하겠다. (중략)

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.608-610
• /
• 2011

본 논문에서는 자동차의 도어의 충격봉의 형상에 따른 변형률과 최대응력을 ANSYS Workbench환경을 이용해 원형, 반원형, 모자형 개단면, 정사각형 등의 단면 형상에 따른 변형량 특성을 측정해 본 결과 변형률은 모자형 개단면 모델이 가장 적은 변형률을 가지는 것으로 나왔으며, 무게가 30%정도 적게 나가는 반원형도 두 번째로 적은 변형률을 가지는 것으로 나타났다. 최대응력의 경우는 반원형이 가장 적은 최대응력 값을 가지는 것으로 나왔고, 변형률과는 다르게 중심부 보다는 충격봉과 프레임의 연결부위에서 최대응력이 발생하는 것을 알 수 있었다. 이를 통해서 충격봉의 중심부는 변형률 및 응력이 다른 부분에 비해서 크게 작용하므로, 중앙부위의 단면계수가 높아야 한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.345-351
• /
• 2010

The oblique incidence technique for ultrasonic nonlinear characterization was studied in stainless steel 316L alloy subjected to high cycle fatigue. A dog-bone plate specimen was prepared to make different faitgue-driven deformation at each position where the stress concentration could occur in the middle of specimen. In addition to the normal transmission technique, the oblique incidence technique which is newly suggested in this study, was used to measure ultrasonic nonlinear parameter. The fatigued specimen shows higher ultrasonic nonlinear parameter than the virgin specimen for both techniques. Ultrasonic nonlinear parameter highly increases in the middle of test specimen where the stress concentration existes. Relative nonlinear parameter has strong correlation with fatigue damage. Consequently, the oblique incidence technique with longitudinal wave can be potential to characterize high cycle fatigue damage.

• Transactions of Materials Processing
• /
• v.1 no.2
• /
• pp.20-31
• /
• 1992

대형 강괴의 업셋팅 공정은 주조 조직의 방향성을 없애고, 코깅작업의 효율을 향상시키기 위한 충분한 단조비를 확보하기 위하여 필요한 공정이다. 공정에 영향을 주는 인자로써 상부 금형의 형상을 변화시켜 가면서 해석을 수행하였다. 극단적인 긴 파이프성 기공의 변형거동과 중심부에서 높이에 따른 원형기공의 닫힘거동 및 압하율과 기공폐쇄 정도를 관찰하였다. 충분한 단조비를 얻고 기공의 닫힘 및 압착을 이루기 위한 적절한 압셋팅 다이의 선택 및 업셋팅 공정을 예측하여 공정개선에 기여하고자 한다.