• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.581-584
• /
• 2007

(HFC(hydrofluorocarbon, 수소불화탄소)는 오존층 파괴 지수가 낮기 때문에 CFC(chlorofluorocarbon)의 대체 물질로 냉매와 발포제로 널리 사용되고 있는 물질이다. 하지만 HFC는 지구온난화 지수가 높은 기체이므로 대기중으로 방출되는 것을 막기 위해 분리/회수하여 재활용하는 것이 중요하다. 본 연구에서는 공기와 HFC의 혼합기체로부터 HFC만을 분리해 내는 방법으로 가스 하이드레이트 형성법을 제안하였다. 이 방법의 열역학적 타당성을 검증하기 위하여 질소+HFC-134a 혼합기체에 대하여 275-285 K의 온도 범위와 1-27 bar의 압력범위에 걸쳐서 가스 하이드레이트 상평형을 측정하였다. 질소는 가스 하이드레이트를 형성하기 위하여 0 $^{\circ}C$에서 150 bar 이상의 높은 압력이 필요한 반면 HFC-134a는 대기압에 가까운 낮은 압력이 필요하다. 두 기체의 평형 압력의 차가 크다는 것은 가스 하이드레이트 형성법을 이용할 경우 기체의 분리 효율이 매우 높다는 것을 나타낸다. 그리고, 본 실험을 통해서 얻어진 혼합기체의 하이드레이트상(H)-액상($L_W$)-기상(V)의 3상 평형선이 순수한 HFC-134a의 3상 평형선에 가깝게 위치하였다. 이는 가스 하이드레이트를 이용한 분리법이 낮은 압력에서 운전될 수 있음을 나타낸다. 이 분리법은 낮은 압력에서 운전되어 경제적일 뿐만 아니라 물 이외의 다른 매개체를 사용하지 않기 때문에 환경 친화적인 공정이라 할 수 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.115-123
• /
• 2022

Statistics on the occurrence of fires in residential facilities over the past 10 years, show that approximately 40% are fires in apartment buildings. To prevent the spread of fire and support evacuation in apartment housing, the fire resistance performance and performance design of fire doors are becoming more important. This study established a database using 395 quality inspection reports from 2016 to 2020, which passed the fire performance test, and derived the fire door performance-influencing factors through an analysis of the structure (12 elements) of the fire door. As a result, the effect of core material, adhesive, hinge type, blowing agent, etc. was confirmed in 287 pass cases. On the other hand, it was confirmed that the occurrence of flames and crevices in the 108 cases of failure were the major failure factors in the fire door fire resistance test. Fire doors are composed of composite materials to prevent failure of fire resistance performance, and efficient design and quality control are required through standardization of components.

• Fire Science and Engineering
• /
• v.33 no.3
• /
• pp.51-55
• /
• 2019

To prevent ozone depletion caused by CFCs, the replacement of Halon with clean agents has been developed in the fire protection field along with refrigerants, detergents, and foaming agents. The alternatives for Halon 1211 have been developed in the portable fire extinguisher area and HCFC-123 is used widely as a clean fire extinguishing agent. The type of expellant gas is important because their own vapor pressure is low. In this study, HCFC-123, HCFC-124, HFC-125, and Novec-1230 were selected as fire extinguishing agents and CO₂, which is expected to improve the fire extinguishing ability, was chosen as the expellant gas. For each agent, experiments changing the agent and CO₂ amount were carried out and HCFC-123 showed a good result, as expected. The extinguisher, HCFC-123 of 1.5 kg, showed the same ability to suppress a class A and B fire as the extinguisher, HCFC-123 of 2.5 kg, which is currently sold on the market. According to this result, the expellant gas has a subsidiary fire extinguish effect. This can reduce the amount of HCFC fire extinguishing agent, which is categorized in the phase-out alternatives, and is a more eco-friendly and economical fire extinguisher than the previous one. This study can also help solve the problems of CO₂ fire extinguishers for class B and C fires, and can be used to extinguish electric and electron facilities fire, which contains large amounts of class A fire combustibles.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2006

Biological nutrient removal(BNR) process used in this study, which was packed with EPS(expanded polystylene) media, has more many advantages in aspect of reducing hydraulic retention time(HRT) of the process and having less effect of temperature in the winter season than commercial process in the present. Bench-scale study was performed using domestic wastewater. In the results, it was observed that the T-N removal efficiencies in HRT 6 hr and HRT 4 hr were 55% and 51%, respectively, showing the small reduction (about 4%) of T-N removal efficiency according to shortening of HRT. In comparison of T-N removal characteristic in summer and winter seasons, it showed that T-N removal efficiencies in summer and winter seasons were 65% and 54%, respectively, showing the 11% lower T-N removal efficiency in winter season than in summer season due to deterioration of nitrification in winter season. In the studies of influent loading rate and C/N ratio, the process showed stable effluent quality under the condition of broad influent loading rate and C/N ratio. Therefore, it is anticipated that the developed process in this study could be applicable to small wastewater treatment plant in nutrient removal.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.931-937
• /
• 1999

Styrene dimers and trimers from polystyrene cup noodle containers were analyzed by GC and GC/MS extracted with various simulants. For the quantitation of styrene dimers and trimers, 1,3-diphenylpropane (DP) and benzyln-butyl phthalate (BBP) were chosen as the standards. The results showed that the average of the styrene dimers in the containers was 603 ppm, and that of trimers was 5731 ppm. Four styrene dimers, including 1,2-diphenyl-cyclobutane, were identified as well as seven trimers such as 2,4,6-triphenyl-l-hexene. The migration of the styrene dimers and trimers, from the cup noodle containers of polystyrene into foods, was conducted using simulants including boiling water as well as soybean oil and n-heptane. In addition to, the analysis of each migrated styrene was also performed filled with boiling water into noodle and soup after certain time (5, 10, 20, 30 min). The results showed that the migration of styrene dimers and trimers from cup noodle containers was not detected in the case of using boiled water or soybean oil as a simulant, while styrene dimers and trimers were detected 1.18 ppm and 14.21 ppm, respectively, when heptane was adopted as a simulant. In the case of filling with boiled water into noodle and soup, both styrenes were not detected at 5 min and 10 min, however, some samples standing for 20 min released styrene dimers and trimers as much as 0.009 ppm, and 0.019 ppm for 30 min.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.141-149
• /
• 2020

The Korea Industrial Standards (KS) stipulates methods and test procedures for measuring the horizontal combustibility of cellular plastics exposed to small flames (KS M ISO 9772:2018) and recommendations regarding the magnetic digestion of extruded polystyrene insulation (XPS) for measurement results (KS M 3808:2020). Although products that are certified to conform to KS standards must have burning characteristics (self-extinguishing), they are incinerated and spread by welds at construction sites, causing significant human and property damages. In this study, XPS produced by five companies, certified by KS, and sold in the market were purchased and tested for ignition and diffusion caused by a weld bullion at a construction site. The results showed that the five products had differences in performance. Three out of the five products were found to be self-saturated, but the other two were easily ignited and diffused, making it difficult for them to be self-extinguishing. Based on the result of this experimental investigation in line with the KS regulations, all the three types of products, including two types of products that were incinerated through weld defects, were found to be non-self-extinguishing, as specified in KS M 3808.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.426-434
• /
• 2022

Bubbles generated by various causes in the ocean are known to persist for long periods of time. Although the volume occupied by bubbles in the ocean is small, the presence of bubbles in ocean due to resonance and attenuation greatly affects the acoustic properties. Accordingly, bistatic reverberation experiment was performed in the ocean where artificial bubbles exist. A number of transducers and receivers were installed on 6 buoys arranged in a hexagonal shape, and blowing agents were dropped in the center of the buoy to generate bubbles. For reverberation modeling that reflects acoustic characteristics changed by bubbles, the spatial distribution of bubbles was estimated using video data and received signals. A measurement-based bubble spectral shape was used, and it was assumed that the bubble density within the spatial distribution of the estimated bubble was the same. As a result, it was confirmed that the bubble reverberation was simulated in a time similar to the measured data regardless of the bubble density, and the bubble reverberation level similar to the measured data was simulated at a void fraction of about 10^-7 ~ 10^-6.8.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.87-98
• /
• 1999

The objectives of this study were to evaluate exposures to airborne methylene chloride and postshift carboxyhemoglobin (COHb) in blood of workers engaged in processes using blowing or cleaning agents, and to investigate correlation between methylene chloride concentrations and the blood COHb levels of workers. The geometric mean (GM) of workers' exposures (8 hour-time weighted averages, TWA) to airborne methylene chloride during cleaning molds using rags wetted with the solvent in the manufacture of flexible polyurethane foam (GM = 61.4 ppm), during operating the dip tank for cleaning molds in the manufacture of lens (GM = 61.0 ppm), and during cleaning the blowing nozzles by spraying the solvent in the manufacture of shoes (GM = 117.2 ppm) were exceeded the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$)-Time Weighted Average (TWA) (50 ppm). The COHb levels were significantly different among groups (p<0.05). The average COHh levels in blood of non-smoking workers were 2.0% in. low-level (<50 ppm) exposure group, and 3.9 % in high-level (>50ppm) exposure group. The average COHb levels in smoking workers were 3.1% in low-level exposure group, and 4.8% in high-level exposure group. The blood COHb levels of no-exposed workers to methylene chloride were 1.8% in non-smoking group, and 2.8% in smoking group. It was found that the COHb level dependeds on the methylene chloride concentration and smoking habit, and was highly correlated with methylene chloride concentration in air. The correlation coefficient was 0.81 among non-smoking workers. The estimated COHb level (3.6%) and 95% upper confidence limit (4.0%) corresponding to TLV-TWA of methylene chloride exceeded the current ACGIH Biological Exposure Index (COHb 3.5%) for carbon monoxide. The estimated COHb level (5.4%) at 100 ppm exceeded the standard (5%) recommended by National Institute for Occupational Safety and Health (NIOSH) for preventing adverse cardiovascular effect. The estimated COHb value and 95% upper confidence limit at 25 ppm of the Occupational Safety and Health. Adminstration (OSHA) Permissible Exposure Limit-TWA (PEL-TWA) were 2.6% and 3.0%, respectively. It is suggested that COHb in blood be kept below 3.0% to comply with OSHA PEL-TWA.

• Journal of Korea Association of Health Promotion
• /
• v.3 no.2
• /
• pp.199-218
• /
• 2005

이 연구는 우리나라 20세 이상 성인에서의 대사증후군 유병률을 파악하고 보건의식행태와 대사증후군간의 상관관계를 분석함으로써 대사증후군의 예방 및 치료를 위한 보건교육·건강증진 프로그램의 기초자료로 활용코자 시행되었다. 연구재료로 1998년 국민건강영양조사에 참여한 20세 이상 성인 24,469명 중 건강검진조사를 받았고 건강면접조사, 보건의식행태조사, 식생활조사에 응답한 7,854명의 조사결과를 활용하였으며, 2001년 미국에서 발포된 제 3차 콜레스테롤 관리지침(NCEP-ATP3)에서 제시된 대사증후군 진단기준 및 WH0 아시아/태평양지역 허리둘레를 기준으로 대사증후군 유병률을 분석하였다. 결과는 다음과 같다. 우리나라 20세이상 성인의 대사증후군 유병률은, NCEP-ATP3 기준에서 13.3%(남자 10.1%, 여자 16.0%), 아시아/태평양지역기준에서 19.8%(남자 16.7%, 여자 22.4%)로 아시아/태평양지역 기준에서, 남자보다는 여자에서 더 높았다. 대사증후군 진단항목 중복부비만, 저 HDL-콜레스테롤의 유병를은 여자에서, 고중성지방혈증, 공복시고혈당 유병률은 남자에서 더 높았고, 연령이 증가할수록 대사증후군의 유병률이 증가하였다. 또 대사증후근 진단할목의 보유경향은 ATP3진단기준에서 남자는 복부비만을 제외한 4개항목을 70%이상에서, 특히 고중성지방혈증은 95.0%에서 보유하였다 여자는 저HDL-콜레스테롤과 고중성지방혈증을 70%이상에서 보유하였다. 아시아/태평양 진단기준에서는 남자의 경우 고중성지방혈증을 88.0%에서, 여자의 경우 복부비만 및 저 HDL-콜레스테롤을 80%이상에서 보유하고 있었다. 대사증후군과 보건의식행태 간의 상관관계를 분석한 결과, 교육수준이 낮을수록, 결혼하지 않은 사람에 비해 결혼한 사람에서대사증후군 위험이 증가하였으며, BMI가 증가할수록 대사증후군 위험이 급격히 증가하였고, 고혈압·뇌졸중, 당뇨병 가족력이 있는 남자에서 대사증후군 위험이 증가하였다. 또 스스로 건강하지 않다고 생각하는 사람일수록 현재 흡연자의 PACK- YEAR가높을수록, 자주 술을 마실수록, )회 음주량이 많을수록, 과음빈도가 많을수록 대사증후근 위험이 증가하였으며, 알코올 의존 경향이 있는 경우에서도 유의한 결과를 보였다. 최근 1년간 체중이 감소 혹은 증가된 경우에서 유의한 결과를 보였으며, 체증감소정도가 클수록 대사증후군 위험이 증가하였다. 이상의 결과를 종합해 볼 때, 우리나라 성인의 대사증후군 유병률은 비교적 높으며 대사증후근의 발생에는 보건의식행태, 특히 음주 흡연비만 연령 교육수준 등이 밀접하게 관여한다고 할 수 있다. 그러나 앞으로 대사증후군의 예방을 위한 건강증진 프로그램의 기획 및 치료방침 수립을 위해서는 우리 나라대사증후군의 유병에 영향을 미치는 진단기준항목 및 관련요인의 상호 연관성, 우리나라에 적합한 진단기준 설정 등에 대한 지속적이고 깊이 있는 연구가 이루어져야 할 것이다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.4
• /
• pp.199-204
• /
• 2003

Microstructure and chemical analysis of sintered bricks containing recycled wastes were investigated by SEM and EDS. The recycled wastes for which substitute ceramic raw materials were EAF (electric arc furnace) dust, fly ash and stone ash. Yellowish and brownish regions on the surface and brownish and blackish regions in the inside of bricks were observed. Main component of yellowish region on the surface turned out to be Zn. No chemical difference between the black-core region and brownish matrix. Mullite crystallites of 1 fm size were distributed in the inside of bricks and enclosed by glass phases. It seems that alumine-silicate mixtures of kaolin and fly ash were transformed to mullite crystallites during the sintering. Relatively large pores ot several ten fm size were observed in the black-core region in the inside of bricks. The main components of the inside of brick were Al and Si. The minor components were C, Na, Mg, K, Ca, and Fe. Particularly, the precipitates of Fe-rich crystallites were observed in the amorphous matrix. These precipitates were formed due to the local reduction atmosphere in the inside of bricks. Zn-rich covers were found on the surface of bricks because Zn diffused from the inside of bricks to the surface under the reduction atmosphere.