• Clean Technology
• /
• v.27 no.4
• /
• pp.325-331
• /
• 2021

In this study, bio-carbons were produced by activation process from unused biomass (Grade 3 wood pellet and spent coffee grounds) to determine the removal performance of formaldehyde and acetaldehyde. The activation experiments were conducted in a fixed bed reactor using CO₂ as an activation agent. The temperature of the activation reactor and input of CO₂ were 900 ℃ and 1 L min^-1 for all the experiments. The maximum BET surface area of about 788 m² g^-1 was obtained for bio-carbon produced from Grade 1 wood pellet, whereas about 544 m² g^-1 was achieved with bio-carbon produced from spent coffee grounds. In all the experiments, the bio-carbons produced were mainly found to have micro-porous nature. A lower ash amount in raw material was favored for the high surface area of bio-carbons. In the removal test of formaldehyde and acetaldehyde, the bio-carbon produced from spent coffee grounds showed excellent adsorption performance compared with woody biomass (Grade 1 wood pellet and Grade 3 wood pellet). In addition, the comparative experiment of commercial impregnated activated carbon and bio-carbon produced from spent coffee grounds was conducted. In terms of formaldehyde removal performance, the commercial impregnated bio-carbon was excellent, while bio-carbon produced from spent coffee grounds was excellent in acetaldehyde removal.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.222-232
• /
• 2023

In this study, a hollow fiber support membrane was prepared by a non-solvent induced phase separation (NIPS) method using a polysulfone (PSf). The prepared hollow fiber support membrane was coated with PDMS and Pebax to prepare a hollow fiber composite membrane. The prepared composite membrane was measured for permeance and selectivity for pure CO₂, H₂, O₂ and N₂. Gas separation performance of the module having the highest selectivity (CO₂/H₂) among the prepared composite membrane modules was measured according to the change in stage cut using simulated gas. The composition of the simulated gas used at this time was 70% CO₂ and 30% H₂. In the 1 stage experiment, it was possible to obtain values of about 60% of H₂ concentration and 12% of H₂ recovery. In order to overcome the low H₂ concentration and recovery, 2 stage serial test was performed, and through this, it was possible to achieve 70% H₂ concentration and 70% recovery. Through this, it was possible to derive a separation process configuration for CO₂/H₂ separation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.858-859
• /
• 2007

차량용 텔레매틱스 시스템에서의 HMI(Human-Machine Interface)는 차량 환경, 단말기, 운영 체제 등에 맞게 특화되어야 한다. 본 논문에서는 특히 운전자와 미들웨어 특성에 특화된 차량 환경을 고려한 HMI 소프트웨어를 설계하고 이에 대한 적용 사례를 살펴 보고자 한다. 본 논문에서 제시된 HMI 소프트웨어는 국제적으로 임베디드 환경에서 널리 사용되는 운영 체제에 중립적이며 Java 기술을 적용하는 OSGi 프레임워크에 기반한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1104-1117
• /
• 1989

본 연구는 축방향의 동압축하중(axial dynamic compression)을 받는 작은 중공원판이 고변형도율(.epsilon.＞1,000/sec), 고변형률(.epsilon.=ln(h/h$_{o}$ )＞1.0)로 변형하는 재료에 대해서 연구하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.100-105
• /
• 1994

본 연구에서는 변속기 중립상태에서 클러치 설계 인자인 비틀림 스프링과 건마찰에 의해서 클러치에 나타나는 히스테리시스, 그리고 클러치 디스크의 정적처짐을 발생시키는 드래그토크(drag torque)가 클러치의 동적인 거동과 기어래틀에 미치는 영향을 분석하고자 한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.781-783
• /
• 2003

그룹 키는 어플리케이션 계층에서 많이 사용하고 있으며, 이는 각자 다른 환경에서 동작하는 사례가 많다. 따라서, 이기종간의 환경에서 동작하는 그룹 키를 언어 중립적이고 플랫폼 독립적인 XML을 사용하여 통합 가능한 환경의 구성을 위해 그룹 키 프로토콜을 설계하고자 한다. 이는, XML의 특성상 어떠한 환경에서도 영향을 받지 않으므로 어느 플랫폼이나 적용이 용이한 이점을 가진다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.93-94
• /
• 2023

This study evaluated the mechanical properties and microstructure of calcium silicate cement based paste according to carbonation curing conditions. As a result, both compressive strength and carbonation depth increased with the carbonation curing period.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.82-93
• /
• 2024

Since the cement industry generates more than 60 % of CO₂ during the clinker production process, supplementary cementitious materials are used worldwide to reduce CO₂ efficiently. Mainly used supplementary cementitious materials such as blast furnace slag and fly ash, which are used in various industries including the cement industry, concrete admixtures, and ground solidification materials. However, since their availability is expected to decrease in the future according to the carbon neutrality strategy of each industry, new supplementary cementitious materials should be used to achieve the cement industry's goal for increasing the additive content of Portland cement. Limestone is a material that already has a large amount in the cement industry and has the advantage of high grinding efficiency, so overseas developed countries established Portland limestone cement standards and succeeded in commercialization. This study was an experimental study conducted to evaluate the possibility of utilizing domestic PLC, the effect of fineness and replacement ratio on the physical properties of cement was investigated, and the environmental impact of cement was evaluated by analyzing CO₂ emissions.

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.231-235
• /
• 2011

Ligneous biomass such as wood pellet is characterized as carbon neutral which has no carbon dioxide emission ; additionally, it can be used as an alternative fuel by co-firing without additional plant reformation as well as for maintaining stability of fuel supply. We can develop CDM project while co-firing by using biomass into conventional coal fired thermal power plant with AM0085 CDM methodology, and it's possible to prove additionality as fuel cost per kWh is higher than bituminous. The study shows that the electricity by biomass can reduce green house emission by $0.6737tCO_2$ per MWh.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.27-37
• /
• 2007

This research was conducted to determine the optimum lifting positions on precast concrete slabs for precast concrete pavement construction, based on the analysis of concrete stress distribution under various lifting conditions. To analyze stresses in concrete slabs, the finite element method was implemented and a numerical model of the precast slab that was going to be used in the experimental construction was developed. Changes in the stress distribution due to the lifting angle were investigated because slab lifting is not always performed in the perpendicular direction to the slab surface. In addition, the effect of the lifting level, the distance between the neutral axis of the slab and the lifting point, on the stress distribution was investigated since the lifting point is not always at the neutral axis of the slab. To consider the actual steel design of the precast slab, the effect of the reinforcement near the lifting point was also investigated. From this study, the optimum lifting positions of the precast slabs were determined according to the lifting angle and level, and the results were compared with the lifting positions used in the PCI standards.