• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.185-185
• /
• 2011

기존 장대레일 궤도의 안정성 평가는 궤도 매개변수에 대하여 고정된 안전측의 값을 사용하는 결정론적인 해석에 의존해서 평가되어져 왔다. 그러나 실제현장의 궤도조건은 많은 영향인자들에 의해 그 특성이 불확실하게 변하고 있다. 따라서 온도하중에 의한 궤도 좌굴에 영향을 미치는 궤도 구성인자들의 불확실성 및 임의성을 보다 합리적으로 고려하기 위해서 확률론적 기법을 적용하는 것이 필수적이다. 본 연구에서는 기존 본 연구진에 의해 개발된 장대레일 궤도의 좌굴확률 평가시스템을 이용하여 좌굴 취약도 곡선을 나타내었으며, 궤도 좌굴에 영향을 미치는 주요변수 중 하나인 도상횡저항력에 대한 영향을 분석하였다. 좌굴확률 평가시스템에서는 장대레일 궤도의 좌굴확률을 산정하기 위하여 구조물의 안정과 파괴를 판단할 수 있는 기준을 한계상태방정식으로 표현하고, 이 한계상태방정식으로부터 확률론적 기법 중 하나인 AFOSM(Advanced First Order Second Moment) 방법을 이용하여 파괴확률의 간접적인 지표인 신뢰도지수(${\beta}$)를 통해 좌굴확률을 계산한다. 한계상태방정식에서 구조물의 강도(보유성능)에 해당하는 부분은 궤도의 허용좌굴온도이고, 하중(요구성능)에 해당하는 부분은 레일온도하중으로써 현재 레일온도와 중립온도의 차로 반영된다. 허용좌굴온도 산정에 고려되는 주요변수는 곡선반경(Radius), 도상횡저항력(Lateral Ballast Resista nce), 연직도상강성(Vertical Ballast Stiffness), 궤도 틀림량(Misalignment), 틀림길이(Half Wave Length), 열차운행속도(Velocity)이다. 각 확률변수들이 갖는 확률분포는 모두 정규분포로 가정하였다. 궤도의 기하학적 특성은 곡선반경 5,000m에 대해 고려하였으며, 열차는 KTX의 제원을 사용하여 정지된 상태에서 고려하였다. 틀림량과 틀림길이는 이에 대한 통계적 특성자료가 부족하여 확률변수로 고려하지 않고 결정론적 값으로 취급하였다. 레일온도의 통계적 특성치는 본 연구진에 의해 구축된 기후요소 및 레일온도 DB를 근거로 결정하였으며, 중립온도는 선로관리지침에 따라 $25{\pm}3^{\circ}C$를 기준으로 결정하였다. 또한 도상횡저항력은 실측 데이터를 참고로 하여 평균값에서 10%의 변동량을 갖는 것으로 보고 통계적 특성치를 결정하였다. 도상횡저항력이 좌굴확률에 미치는 영향을 매우 큰 것을 알 수 있었으며, 레일온도 $60^{\circ}C$일 때 도상횡저항력이 증가하면서 감소되는 좌굴확률이 도상저항력이 커질수록 그 감소량이 작아지는 것을 알 수 있었다.

• The Journal of the Petrological Society of Korea
• /
• v.15 no.3 s.45
• /
• pp.139-153
• /
• 2006

For the characteristics of rock material and standardization, flagstones of the trifurcated path in Jongmyo Royal Shrine, registered as World Cultural Heritage, were studied on the basis of petrographic, petrochemical and magnetic properties. The flagstones are composed mainly of pale gray fine to medium grained hornblende biotite granite, pale gray fine to medium grained biotite granite, pale pink medium to coarse grained biotite granite, pink medium to coarse grained biotite granite and minor pegmatite and schist. Flagstone represents the average size of $65cm{\times}4cm$ (standard deviation $12cm{\times}7cm$) and suitable (34.7%), common (41.4%) and unsuitable (23%) in roughness. It is interpreted that pale pink and pink granite, pegmatite, schist and other flagstones with unsuitable state are not original rock materials and were exchanged during restoration, in the past. The number of these non-original rock materials is about 560 flagstones. We suggests that the standard flagstone of the trifurcated path is pale gray fine to medium grained biotite granite (${\pm}$hornblende in trace), 70wt.% in $SiO_2$, content, and ${\pm}0.1{\times}10^{-3}\;SI$ in magnetic susceptibility.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.528-542
• /
• 2021

The purpose of this study is to examine the commonalities and differences that appear across the types of perceptions toward job changes according to the Industrial 4.0. among job seekers and workers. For an approach to subjective beliefs, viewpoints and preferences, the data investigated using Q methodology, was analyzed using the QUANL program for PC. From the Q-methodology, the types of perception toward job changes due to Industrial 4.0 and their features were drawn. The perception types were classified as four types: negative perception type, neutral perception type, high evaluation about quality of jobs, and employment increase perception type. The results found that views toward job transition due to Industrial 4.0 are were diverse beyond the dichotomy and institutional and educational efforts should be required to mitigate job insecurity and cope with job changes caused by technological advance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.439-439
• /
• 2023

근래 국내에서는 기후변화로 인한 국지성 호우가 점점 늘어나는 추세로 급격한 하천 수위상승 및 유량 증가로 인해 지속적으로 홍수피해가 발생하고 있으며, 이를 예방하기 위한 실시간 자료수집의 중요성이 증대되고 있다. 이러한 사회적 환경을 고려하여 우리는 물 순환에 관한 자료를 실시간으로 수집하고 홍수예보를 위한 수문조사시설을 설치하여 운영하고 있으나, 대부분 하천과 인접한 곳에 설치되는 시설 특성상 시스템 오류, 전원 이상 발생 등 다양한 요인으로 발생하는 자료 결측·손실에 즉각적인 조치가 어려운 실정이다. 이에, 현장 기반 시설의 안정적인 운영을 통한 연속성 있는 자료 제공을 위해 수문조사시설 중 하천 내 설치된 유량측정시스템에 ICT·사물인터넷(IoT, Internet of Things)을 적용하여 현장 환경-정보 등 언택트(non-contact) 모니터링을 통해 실시간 점검을 수행하였다. 그 결과 2022년 기준 총 508회(현장점검 358회) 점검 중 150회 원격점검을 수행하였고, 이중 74회 즉각 점검 및 복구 조치가 이루어져 점검 시간 단축을 통한 자료 결측 최소화, 현장점검 최소화를 통해 효율적인 시설 운영이 가능하도록 하였다. 또한, 점검을 위해 현장 이동 시 발생하는 이산화탄소 배출량 저감으로 탄소중립 효과도 나타낼 수 있었다. 코로나바이러스감염증-19 이후 사회환경 패러다임 전환에 따라 비대면 활성화, 탄소중립, 안전하고 건전한 사회환경 조성 등과 같이 대면 위주로 운영되는 현장 시설의 관리 방향 또한 사회적 상황을 고려하여 효율적인 시설물 운영, 예산 절감, 자료의 연속성 확보 등을 위해 적극적인 운영 방향의 전환이 필요하다고 판단된다.

• Clean Technology
• /
• v.29 no.3
• /
• pp.193-199
• /
• 2023

Biomass has been used to secure renewable energy certificates (REC) in domestic and overseas coal-fired power plants. In recent years, biofuel has been diversified from traditional wood pellets to non-woody biomass. Non-woody biomass has a higher content of alkaline metals such as K and Na than wood-based biomass, resulting in a lower melting point and an increase in slagging on boiler tubes, which reduces boiler efficiency. This study analyzed the effect of kaolin, an additive commonly used to increase melting points, on biomass co-firing to coal through thermochemical equilibrium calculations. In a previous experiment on biomass co-firing to coal conducted at 80 kW_th, it was interpreted that the use of kaolin actually increased the amount of fouling. In this study, analysis showed that when kaolin was added, aluminosilicate compounds were generated due to Al₂O₃, which is abundant in coal, and mullite was formed. Thus, it was confirmed that the amount of slag increased when more kaolin was used. Further analysis was conducted by increasing the biomass co-firing rate from 0% to 100% at 10% intervals, and the results showed non-linear liquid slag generation. As a result, it was found that the least amount of liquid slag was generated when the biomass co-firing rate was between 50 and 60%. The phase diagram analysis showed that high melting point compounds such as leucite and feldspar were most abundantly generated under these conditions.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.613-617
• /
• 2022

The equipment for fabricating the large-area PTFE nanofiber coated-PTFE foam filter for use as filtration parts of the baghouse that removes particulate matter (PM) in industrial sites was designed and manufactured in this study. The PTFE nanofiber was coated on a commercial PTFE foam filter to increase its PM collection efficiency. The equipment and fabrication processes using a roll-to-roll system were proposed to continuously coat PTFE nanofibers on the surface of the PTFE foam filter. The electrospinning and annealing parts were designed and made by optimizing the equipment for the roll-to-roll system. The surface morphology, composition, and filtration characteristics of the large-area filter fabricated by this equipment were confirmed. PTFE nanofibers were uniformly coated on the large-area filter, and the PTFE nanofiber coated-PTFE foam filter showed PM_2.5 collection efficiency of 91.79% and an appropriate pressure drop of 62 Pa with a face velocity of 1 m/min at 280 ℃.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.1-14
• /
• 2003

E-commerce requires many different types of communications and an unprecedented amount of data changes hands. The many different Platforms and systems interacting require a platform neutral standard for data exchange. One of the technologies that can fill this niche is XML, the extensible markup language established as a standard by the W3C. By being standardized and platform neutral, XML to be factor in e-commerce application and using many systems In this paper, we designed XML document that is used in transaction between corporations, and implement the B2B integration system based on XML database system. Also we use XSLT that make efficient transformation XML documents for exchanging heterogeneous XML data between corporations. So, he or she can more easily and efficiently exchange XML documents between corporations using this system.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.575-582
• /
• 2020

We proposes a method to estimate political preference of users who write comments on internet news. We collected and analyzed a massive amount of new comment data from internet news to extract features that effectively characterizes political preference of users. We expect that it helps user to obtain unbiased information from internet news and online discussion by providing estimated political stance of news comment writer. Through comprehensive tests we prove the effectiveness of two proposed methods, lexicon-based algorithm and similarity-based algorithm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.55-65
• /
• 2021

In this study, the design criteria is presented for Finocyl grain, which is easy to generate neutral thrust when designing solid rocket motors. For this purpose, an automated program using drafting method was developed for burn-back analysis and its accuracy was validated. Using this developed program, burn-back analysis was performed with various configuration parameters of Finocyl grain, and the tendency and sensitivity analysis on burning characteristics were performed. Based on this analysis, the design criteria were presented to generate the neutral burning surface area trace for a Finocyl grain.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.2
• /
• pp.277-287
• /
• 2017

This paper describes the specifications on balanced steel ratio and maximum reinforcement for the design of RC flexural members by the Korean Highway Bridge Design Code based on limit states design. The Korean Highway Bridge Design Code (Limit States Design) is not provide for the balanced steel ratio specification for the calculation of required steel area of RC flexural members design. The maximum steel area limited the depth of the neutral axis at the ultimate limit states after redistribution of the moment, and also recommended the maximum steel area should not exceed 4 percent of the cross sectional area. However, from the maximum neutral axis depth provisions should increase the cross section is calculated to be less the maximum reinforcement area, and according to the 4% of the cross sectional area of the concrete, the tensile strain of the reinforcement is calculated to be greater than double the yielding strain, so can not guarantee a ductile behavior. This study developed a balanced reinforcement ratio that is basis for the required reinforcement calculation for tension-controlled RC flexural members design in the ultimate limit states verification provisons and material properties and applied the ultimate strain of the concrete compressive strength with a simple formular to be applied to design practice induced. And assumed the minimum allowable tensile strain of reinforcement double the yielding strain, and applying correction coefficient up to the ratio of maximum neutral axis depth, proposed maximum steel ratio that can be applied irrespective of the reinforcement yield strength and concrete compressive strength.