• 대한공업교육학회지
• /
• 제34권2호
• /
• pp.396-410
• /
• 2009

이 논문은 산업용 로봇의 모델링을 할 때 일어나는 불확실성을 측정하여, 이 불확실성이 야기하는 비선형 문제를 해결하는 데 필요한 정보를 얻는 데 목적이 있다. 우선 주어진 로봇모델에서 수학적 운동방정식을 유도하고, 불학실성의 물리적 현실에 가능한 가상모델을 접목하여 수학적 확장 모델을 세우고, 이를 바탕으로 불확실성을 측정 할 수 있는 관측자를 설계한다. 이 불확실성에는 모델링을 하기 어려운 모델링 오차, 중력, 마찰, 질량의 불균일 분포, 코리오리스 힘이 포함된다. 관측자와 관련된 조건들을 관측가능성 및 수렴 관계를 분석한다.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.99-106
• /
• 2021

Scientists at the International Space Station have been studying space life sciences to prepare for future manned space explorations, and require experimental specimen such as rodents for mass measurement. However, it is challenging to use mass measurement systems in space owing to the errors caused by factors such as mechanical-electronic noise. Therefore, to minimize the measurement errors, we propose a new algorithm called multiple calibration, which divides the mass range and calculates the sample weight by using the correction equation of each interval. We performed tests to evaluate and compare the performance of the proposed method to that of normal methods. As a result, the measurement accuracy improved by over two times using the multiple calibration method. Furthermore, we conducted mass measurements on various samples and confirmed that our method is valid for mass measurements.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.127-139
• /
• 2024

This paper discusses a gravity compensation technique designed to reduce wavefront error caused by gravity during the assembly and alignment of satellite multi-band optical sensor. For this study, the wavefront error caused by gravity was analyzed for the opto-mechanical structure of multi-band optical sensor. Wavefront error, an indicator of optical performance, was computed by using the displacements of optics calculated through structural analysis and optical sensitivity calculated through optical analysis. Since the calculated wavefront error caused by gravity exceeded the allocated budget, the gravity compensation technique was required. This compensation technique reduces wavefront error effectively by applying the compensation load to the appropriate position of the housing tube. This method successfully meets the wavefront error budget for all bands. In the future, a gravity compensation equipment applying this technique will be manufactured and used for assembly and alignment of multi-band optical sensor.

• 한국컴퓨터정보학회논문지
• /
• 제19권5호
• /
• pp.43-52
• /
• 2014

최근, 다양한 형태의 웨어러블 컴퓨팅 디바이스와 이에 따른 응용 프로그램이 개발되고 있으며, 이들 중에서 헬스 케어의 한 영역으로 웨어러블 컴퓨팅 디바이스를 이용하여 개인의 운동량은 측정하는 다양한 연구가 진행되고 있다. 본 논문에서는 가장 기초적인 운동인 걸음걸이 측정 알고리즘으로 중력 제거 및 백터 회전(Gravity Removal and Vector Rotation) 알고리즘을 제안하고, 이를 위한 실험으로 보행 또는 주행 중인 개인의 다양한 위치에 부착한 웨어러블 디바이스에 장착된 3축 MEMS 가속도 센서로부터 획득된 가속도 값을GRVR 알고리즘을 이용하여 걸음 수를 측정한다. GRVR은 가속도 센서로 획득된 3축 가속도 값으로 부터 중력에 의한 가속도 분은 저대역 필터를 이용하여 제거 하고, 이 후 각각의 가속도 값에서 직류 성분 제거 및 센서 축 회전 보상인 GRVR 알고리즘으로 보행 혹은 주행 중에 순수하게 걸음걸이에 의하여 발생하는 가속도 변화분 만을 추출한다. 실험 결과로 웨어러블 디바이스를 개인의 허리 중앙 혹은 우측에 부착한 경우 GRVR 알고리즘을 이용한 걸음 수 측정은 99.4%의 정확도, 또한 손목에 부착한 경우 상용 3축 가속도 만보계의 83%보다 정확한 91.1%의 정확도를 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.733-737
• /
• 2016

In this paper, we propose a mechanism that can compensate for gravity in a robot manipulator. Industry robots generate torque due to carrying heavy weight. For this reason, the robots need high specification motors, which increases the prices of the robots and their production costs. In order to resolve these problems, a mechanism for gravity compensation has been developed using a spring and wire system. But this system has problems related to wire stretching. A winding mechanism is therefore used to supplement this drawback of the wire. The robot used was developed by the 1-DOF system. Analysis was performed for the performance of the mechanism. Experiments were conducted to compare simulation results and experimental results.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.789-796
• /
• 2016

The weight of an antenna system pointing satellite on the mobile platform is restricted by the weight limit of the mobile platform. The maximum power of the actuator driving the antenna system is thus limited because a high power actuator needs a heavier weight. Thus, a drive system is designed to have a low torque requirement by reducing the gravitational torque depending on gravity or acceleration of the mobile platform, including vibration, shock, and accelerated motion. To reduce the gravitational torque, the mathematical model of the gravitational torque is preferentially obtained. However, the method to directly estimate the mathematical model in an antenna system has not previously been reported. In this paper, a method is proposed to estimate the gravitational torque as a mathematical model in the antenna system. Additionally, a method is also proposed to calculate the optimal weight of the balancing weight to compensate for the gravitational torque.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.393-397
• /
• 1996

A stewart platform-based force/torque sensor with 6 elastic legs was designed and manufactured Kinematic design parameters were determined so that the force/torque sensor might have the isotropic force/torque properities. In a force/torque analysis, it was used the solution of forward kinematics by linearization of the solution of the inverse kinematics. The performance of te force/torque sensor was investigated by measurement experiments. The gravity compensation was conducted to reduce the force and torque effects by the weights of the upper plate, joints and other sensor parts.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.242-247
• /
• 2016

A robot manipulator handling a heavy weight requires high-capacity motors and speed reducers, which increases the cost of a robot and the risk of injury when a human worker is in collaboration with a robot. To cope with this problem, we propose a collaborative manipulator equipped with a counterbalance mechanism which compensates mechanically for a gravitational torque due to the robot mass. The prototype of the manipulator was designed on the basis of a four-bar linkage structure which contains active and passive pitch joints. Experimental performance evaluation shows that the proposed robot works effectively as a collaborative robot.

• 로봇학회논문지
• /
• 제12권1호
• /
• pp.11-18
• /
• 2017

Static balance of an articulated robot arm at various configurations requires a torque compensating for the gravitational torque of each joint due to the robot mass. Such compensation torque can be provided by a spring-based counterbalance mechanism. However, simple installation of a counterbalance mechanism at each pitch joint does not work because the gravitational torque at each joint is dependent on other joints. In this paper, a 6 DOF industrial robot arm based on the parallelogram for multi-DOF counterbalancing is proposed to cope with this problem. Two passive counterbalance mechanisms are applied to pitch joints, which reduces the required torque at each joint by compensating the gravitational torque. The performance of this mechanism is evaluated experimentally.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.31-36
• /
• 2011

Smart Door(SD) is a human friendly power-assisted door system for passenger car doors. It offers comfort and safety to passengers and drivers by supplying additional power. In this study, dynamic system model and the equation of motion derivation are derived. And we propose the disturbance observer based collision detection algorithm for safety when opening the door. A disturbance caused by collision has a fast response compared to a friction, uncertainties and so on. The main idea this study is to estimate a variation of disturbance for stably and effectively detecting a collision. In order to evaluate a performance of collision detection, an experiment set up is constructed. The experimental results validate the usefulness of the proposed collision detection algorithm.