• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.203-204
• /
• 2008

EGM96 지구중력장모델을 개선시킨 EGM2008 지구중력장모델이 미국 NGA에 의해 발표됨에 따라, 본 연구에서는 EGM2008지구중력장모델을 한반도 지역을 대상으로 최대차수 360으로 해석하여 기존의 지구중력장모델인 EGM96(360차수) 및 EIGEN-GL04C(360차수)와 비교하였다. 또한 EGM2008은 기존의 구면조화분석한계인 360차수를 뛰어넘고 있으므로 격자 간격 $30'{\times}30'$ 및 $15'{\times}15'$, 그리고 $10'{\times}10'$로 각각 해석하여 지오이드고를 계산하고 정확도를 평가하였다. 정확도 평가는 우리나라의 수준점에서 GPS측량을 실시한 464점의 GPS/leveling 데이터를 활용하였다. 평가결과 EGM2008(360차수)은 $-0.100{\pm}0.183m$를 나타내 EGM96(360차수)결과인 $0.156{\pm}0.238m$에 비해 상당한 정확도의 개선을 가져왔으며, 2190차수의 고차항으로 해석한 결과 $-0.069{\pm}0.140m$ 더욱 정확한 결과를 얻을 수 있음을 확인하였다.

• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.73-81
• /
• 2024

To estimate the tectonic displacement of the Chugaryeong Fault System (CFS), gravity surveys were conducted along the Dongducheon fault (DF) and the Wangsukcheon fault (WF). A total of 1,100 stations for the DF and WF regions have been added to the current gravity database. The results of the gravity interpretation indicate that (1) the dextral displacement of the DF is about 3,000 m, similar to the tectonic displacement (2,900-3,100 m) shown in the geological map. (2) The dextral displacement of the WF is about 3,200 m. (3) Taken together, the tectonic displacement of the CFS is estimated to be about 3,000 m on average. To investigate more accurate tectonic displacement of the CFS, further gravity surveys is planned for the Pocheon fault, Gyeonggang fault, and Inje fault.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.217-222
• /
• 2017

Any object located in the earth's gravitational field experiences a force in the direction of the center of the earth. In order to describe the motion of objects in the field, the solutions to a system of simultaneous vector kinematic equations need to be obtained. In the analysis of freely-falling objects, the reference direction +y is usually defined to be the downward direction. In the analysis of the motion of objects thrown upward, the reference direction +y is usually defined to be the upward direction. In the analysis of the motion of objects thrown downward, the reference direction +y is usually defined to be the downward direction. In this paper, we show that the choice of reference axis in either upward or direction gives the same results by adopting a scalar product of two vectors in solving the vector kinematic equations. It is rare to find other examples of using a scalar product of two vectors in solving vector kinematic equations describing the motion of objects. An application of this study is that we can arbitrarily choose the reference direction for objects moving in a horizontal direction, including projectile motions.

• The Bulletin of The Korean Astronomical Society
• /
• v.15
• /
• pp.5.1-5.1
• /
• 1990

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.283-293
• /
• 2021

The homogeneity of the compacted ground was analyzed using drone-based remote terrain and gravity field data. Among the topographic elements calculated by the hydrological algorithm, the topographic curvature effectively showed the shape of the surface that occurred during the compaction process, and the non-uniformly compacted area could be identified. The appropriate resolution of the digital topography requires a precision of about 10 cm. Gravity field Interpretation was performed to analyze the spatial density change of the compacted ground. In the distribution of residual bouguer gravity anomaly, the non-homogeneously compacted area showed a different magnitude of gravity than the surrounding area, and the difference in compaction was identified through gravity-density modeling. From the results, it is expected that the topographic element and gravitational field analysis method can be used to evaluate the homogeneity of the compacted ground.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.40.1-40.1
• /
• 2009

미래 한국의 달궤도선 임무에 대비하여 달 근접 궤도 전파기인(orbit propagator) YSPLOP ver. 1(Yonsei Lunar Precise Orbit Propagator version 1)을 개발 하였다. 개발된 궤도 전파기의 성능은 상용 소프트웨어인 STK Astrogator를 이용하여 검증되었다. 개발된 궤도 전파기를 이용, 달 궤도선의 운용에 있어서 다양한 섭동력들이 궤도선의 수명(orbital decay)에 미치는 영향을 분석하였다. YSPLOP ver. 1은 정밀한 달 중심 탐사선의 위치산출을 위하여 M-EME2000 (Moon-Centered, Earth Mean Equator and Equinox of J2000) 좌표계, M-MME2000 (Moon-Centered, Moon Mean Equator and IAU vector of epoch J2000) 좌표계 그리고 M-MEPMD (Moon-Centered, Moon Mean Equator and Prime Meridian) 좌표계를 이용하여 탐사선의 상태(state) 정보를 산출한다. 또한 태양, 지구, 달, 화성, 목성의 중력에 의한 섭동력 및 태양풍에 의한 영향을 포함할 수 있도록 설계되었으며, 달 근접 궤도선의 궤도 운동에 가장 큰 영향을 미칠 수 있는 섭동력인 달의 비대칭 중력장에 의한 영향 또한 고려하도록 하였다. 달의 비대칭 중력장 모델 (Lunipotential model)은 LP165p 모델이 사용되었으며 행성의 정밀한 위치 산출을 위하여 JPL의 DE405 천체력이 사용되었다. 개발된 궤도 전파기를 이용, 달고도 100 km, 궤도 경사각 $90^{\circ}$인 달 중심의 극궤도를 약 30일 동안 전파한 결과, YSPLOP ver. 1의 성능은 STK Astrogator와 비교하여 보았을 때 약 수 m의 오차를 보이는 것으로 확인되었다. 달의 극궤도 탐사선의 궤도 수명을 분석한 결과, 최소한 달의 비대칭 중력장이 70 by 70 이상으로 고려되어야 함을 확인하였으며 이때 달 궤도선의 수명은 약 160일으로 나타났다. 아울러 달 근접 환경에서의 지구 중력에 의한 섭동력은 달 궤도선의 운동에 있어서 무시 할 수 없는 정도의 많은 영향을 끼치고 있음을 확인하였다. 이 연구를 통하여 개발된 궤도 전파기는 미래 한국의 달 궤도선 및 착륙선의 임무 설계시 사용 될 수 있다. 또한 이 연구에서 제시된 달 근접 환경에서의 다양한 섭동력들이 달 궤도선의 운동에 미치는 영향에 대한 해석 결과는 추후 달 근접 임무 설계시 고려되어야 하는 섭동력들의 기본 사양을 제공할 것이다.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.91-103
• /
• 2021

In order to estimate the vertical and horizontal structural in the Yangsan fault core line (Naengsuri area, Pohang), we carried out gravity field measurements and interpretation procedures such as Euler deconvolution method and curvature analysis in addition to the forward modelling technique (i.e. IGMAS+). We found a prominent gravity difference of more than 1.5 mGal across the fault core. This indicates a distinct density difference between the western and eastern crustal area across the Yangsan fault line. Comparing this gravity field interpretation with other existent geologic and geophysical survey data (e.g. LiDAR, trenching, electric resistivity measurements), It is concluded that (1) the prominent gravity difference is caused by the density difference of about 0.1 g/㎤ between the Bulguksa Granite in the west and the Cretaceous Sandstone in the east side, (2) the fault core is elongated vertically into a depth of about 2,000 meters and extended horizontally 3,000 meters to the NNE direction from Naengsuri area. Our results present that the gravity field method is a very effective tool to estimate a three -dimensional image of the active fault core.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.743-752
• /
• 2021

The three-dimensional distribution of the fault was evaluated using gravity field interpretation such as curvature analysis and Euler deconvolution in the Seoul-Gyeonggi region where the Chugaryeong fault zone was developed. In addition, earthquakes that occurred after 2000 and the location of faults were compared. In Bouguer anomaly of Chugaryeong faults, the Pocheon Fault is an approximately 100 km fault that is extended from the northern part of Gyeonggi Province to the west coast through the central part of Seoul. Considering the frequency of epicenters is high, there is a possibility of an active fault. The Wangsukcheon Fault is divided into the northeast and southwest parts of Seoul, but it shows that the fault is connected underground in the bouguer anomaly. The magnitude 3.0 earthquake that occurred in Siheung city in 2010 occurred in an anticipated fault (aF) that developed in the north-south direction. In the western region of the Dongducheon Fault (≒5,500 m), the density boundary of the rock mass is deeper than that in the eastern region (≒4,000 m), suggesting that the tectonic movements of the western and eastern regions of the Dongducheon Fault is different. The maximum depth of the fracture zone developed in the Dongducheon Fault is about 6,500 m, and it is the deepest in the research area. It is estimated that the fracture zone extends to a depth of about 6,000 m for the Pocheon Fault, about 5,000 m for the Wangsukcheon Fault, and about 6,000 m for the Gyeonggang Fault.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.533-540
• /
• 2021

Gravity field analysis and density modeling were performed to evaluate the internal state of the rock mass, which is the cause of cut slope collapse. The shape of the weathered zone and the depth of basement could be confirmed from the complete Bouguer anomaly and density model. The basement depth at the center of the cut slope calculated using the Euler deconvolution inverse method is 30 m, which is about 10 m deeper than the surrounding area. In addition, the depth of basement and the thickness of the weathered zone are similar to the boundary between low resistivity and high resistivity in dipole-dipole survey. From the study results, gravity field analysis and density modeling recognizes the internal state of the rock slope and can be used for slope safety analysis, and is particularly suitable as a method to determine the shape of weathered zones in interpreting the safety of cut slopes

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.27-38
• /
• 1999

The errors between track segments or at the cross-over points of shipborne gravity were successfully reduced by applying a cross-over error adjustment technique using satellite gravity. The integration of shipborne and satellite altimeter-implied free-air gravity anomalies after the cross-over error adjustment resulted in a high resolution gravity map which contains both short and long wavelength components. The successful adjustment of the cross-over errors in the shipborne gravity using the satellite gravity suggests that the shipborne gravity can be combined with the satellite anomalies characterized by a stable and long wavelength component. The resulting free-air anomaly map is evenly harmonized with both short and long wavelength anomalies. Thus the corrected anomaly map can be better used for the geological interpretation. Free-air anomalies with more than 140 mGal in total variations generally correspond to the seafloor topographic changes in their regional patterns. A series of gravity highs are aligned from the Korea Plateau to the Oki Island, which are interpreted to be caused by seamounts or volcanic topographies. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably responsible for the thin crust and shallow seated mantle. The gravity minima along the western and southern shelf edge are associated not only with the local basement morphology and thick sediment fill at the continental margin, but also possibly with the crustal edge effect known for passive continental margins. Series of NE-trending linear anomalies are possibly caused by a swarm of volcanic intrusions followed the initial opening of the Ulleung Basin. The linear high anomalies in the Ulleung Plateau are terminated by the straightly NNW-trending anomalies with a sharp gradient in its western boundary which indicates a fault-line scarp. The opposite side adjoined with the fault-line scarp shows no correlation with the fault-line scarp in geometry indicating that the block might be horizontally slided from the north. A gravity high in contrast to the deepening in seafloor toward the northeastern central Ulleung Basin is probably suggestive of a thin crust and shallow seated mantle.