• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.57-70
• /
• 1997

Conventional procedures to determine vertical deflections and astronomical coordinates require the stellar observations which be under restraints of clear night-time weather conditions, surrounding environment, long observation time and the use of instruments, etc. Therefore the more effective observation method subjugatting these problems has requested. The objective of this study is to propose method to compute vertical deflections, astronomical coordinates(latitude and longitude), and astronomical azimuth by mixing GPS observation results and orthometric heights. For this study, programmed the program which able to obtain the change in geoid undulation by using the GPS- determined geodetic height difference and the orthometric height difference, and GPS satellite surveying was performed at both ten points of astronomical points and four triangulation points around each astronomical station in South Korea. The Astronomical results determined from GPS observations compared to those determined from both conventional astronomical measurements and the recent earth gravitational Model(EGM96).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.441-451
• /
• 2002

Recently, Increasing residential-commercial buildings are composed of upper wall and lower frame type. As structural fragility, a large numbers of researchers have tried to develope the efficient analysis methods. But these studies were too theoretical and were not considered the lateral load which was required in analysing the transfer level in addition to being used nonlinear program which was difficult to use for practical design. thus, results of these studies we not appropriate to apply practical design, therefore, in this paper, the procedure of the current design practice were compared with that of used FEM method and presented new modeling method. in particular, an efficient analytical model which can be used in practical design of residential-commercial buildings for vortical and seismic loads was proposed and the usefulness of proposed model was verified.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.87-93
• /
• 2013

The conceptual design lunar lander demonstrator has been developed to use as a test bed for advanced spacecraft technologies and to test a prototype planetary lander capable of vertical takeoff and landing. Size of the lunar lander demonstrator is the same as that of lunar lander conceptually designed, however, the weight of lunar lander demonstrator is designed in 1/6 scale in consideration of gravity difference between moon and earth. The thruster clustering and virtual flight test were performed in the demonstrator fixed on the ground. The demonstrator ground test has been conducted for two months in the test site for the solid motor combustion of the Goheung Flight Center. The purposes of ground test of demonstrator are to demonstrate and verify essential electronics, propulsion system, control algorithm, embedded software, structure and system operation technologies before developing the flight model lander. This paper is described about the virtual flight test including test configuration, test aims and test facilities

• Composites Research
• /
• v.34 no.6
• /
• pp.350-356
• /
• 2021

When a ship with a planing line operates or turns in a straight line, the floating position and trim change according to the speed, and a large resistance is generated on the hull. In this paper, the resistance to a planing line was estimated through the computational fluid dynamics of a leisure boat with improved hull weight and durability by applying a carbon composite material to the hull. The resistance performance of the bow and stern of the 18ft class leisure boat was checked and the flow field of the entire vessel was estimated, and the stability of the planing line was confirmed by comparing the resistance of each trim through numerical analysis. In addition, it was confirmed that the designed planing line could withstand it sufficiently because the force applied to the hull was not large, and The stability of the boat was analyzed by calculating the wavelength of the wave and the length of the ship as the ratio of gravity to the inertial force and checking how much force the rolling occurred.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.5
• /
• pp.35-43
• /
• 2022

Precise modeling and analysis of closed bomb test(CBT) combustion using solid propellants was performed. The fluid structure interaction(FSI) method was implemented to analyze the gas and solid phases at the same time. The Eulerian analysis method was applied for the gas phase and grain combustion, and the Lagrangian analysis method was implemented for the grain movement. The interaction between the solid phase grains and the combustion gas was fully coupled through the source term. The volume of fluid(VOF) method was used to simulate the burning distance of the grain and the movement of the combustion surface. The force acting on the grain was comprised of the pressure and gravity acting on the grain burning surface, and the grain burning rate and grain movement speed were considered in the velocity term of the VOF. The combustion analysis was performed for both one and three grains, and fairly compared with the experiments. The acoustic field during grain combustion due to pressure fluctuations was also analyzed.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.1
• /
• pp.16-21
• /
• 2022

When an ankle lateral malleolar fracture is accompanied by a deltoid ligament rupture without a medial malleolar fracture, such an injury is called a bimalleolar equivalent fracture. This means that even if there is no bony injury on the medial side, there may be functional instability of the ankle joint due to damage to the deltoid ligament. Manual or gravity external rotational stress radiography is used to differentiate an ankle bimalleolar equivalent fracture from an isolated lateral malleolar fracture. If the medial joint gap is widened on the stress radiography, the deltoid ligament injury can be diagnosed, and surgical treatment for fibula fractures is recommended. After open reduction of the fibula fracture (with syndesmotic fixation if needed), a decision on the repair of the deltoid ligament is taken depending on the surgeons' preference and intraoperative findings. The deltoid ligament repair is performed by inserting a suture anchor (or anchors) in the medial malleolus and fixing the deep and superficial deltoid ligaments to the medial malleolus. The only randomized study to evaluate the utility of deltoid ligament sutures in ankle fractures did not support the deltoid ligament suture, but the study itself had many limitations. An appropriately powered, randomized, controlled trial of the deltoid ligament repair with both patient-reported outcome and radiographic outcome evaluation is needed in the future.

• Korea Trade Review
• /
• v.41 no.3
• /
• pp.43-62
• /
• 2016

As global online business expands, direct overseas sales, where company directly sells products to foreign consumers, has become a new trend. The purpose of this study is to find out the characteristics of B2C Korean online exporters. This study analyzes export companies, 45,267 doing offline business and 205 online, and the two findings drawn from the study are as follows: First, B2C online exporters shipped 4-5 times more products to 10-13 times more countries than offline exporters. It also showed higher rate of export persistency. Second, from using gravity model analysis, it was found that export through online sales removes distance barrier by 60% more than offline. In addition, Free Trade Agreement appears to help boost online overseas sales. This study has significance in that it is the first analysis on B2C online export using actual proof, and it can be differentiated by other researches in terms of identifying the traits of Korean online export.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.7-15
• /
• 2010

In case that the seepage of contaminants into the subsurface has been generated from the waste impoundment by demage of geomembrane liner, it is necessary to repair the leaks of geomembrane liner for minimizing the environmental contamination by electrophoresis method. However, when electrophoresis method is applied to leachate electrolyte system, the phenomenon of clay particles flocculation would be accelerated by the interaction between clay particles and specific chemicals in leachate. In addition, the gravitational settling behaviour would be induced superior to the electrophoretic migration behaviour. Eventually, the limitations of field applicability for using the electrophoresis method are appeared. Therefore, 1-D enhanced electrophoresis method is conducted to prevent the clay flocculation and accelerate the migration of clay particles separately. After the 1-D enhanced electrophoresis experiment, we can get the results that the deflocculation effect of clay particles is increased by electrical repulsion of polymer, which adsorbed in clay particle edge, in case of using PAA dispersing agent.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.441-449
• /
• 2021

With advances in autonomous vehicles, there is a growing demand for more accurate position estimation. Especially, this is a case for a moving robot for the indoor operation which necessitates the higher accuracy in position estimation when the robot is required to execute the task at a predestined location. Thus, a method for improving the position estimation which is applicable to both the fixed and the moving object is proposed. The proposed method exploits the initial position estimation from Bluetooth beacon signals as observation signals. Then, it estimates the gravitational acceleration applied to each axis in an inertial frame coordinate through computing roll and pitch angles and combining them with magnetometer measurements to compute yaw angle. Finally, it refines the control inputs for an object with motion dynamics by computing acceleration on each axis, which is used for improving the performance of Kalman filter. The experimental assessment of the proposed algorithm shows that it improves the position estimation accuracy in comparison to a conventional Kalman filter in terms of average error distance at both the fixed and moving states.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.831-835
• /
• 2007

금강은 우리나라 중부 내륙에서 서해로 흐르는 유로연장 401km, 유역면적이 전 국토면적의 약 10%에 해당하는 $9,886km^2$에 이르는 남한의 5대강 중 하나이다. 1981년, 이 강의 하구로부터 150km 상류지점인 대전시 동북쪽 16km, 청주시 남쪽 16km의 대전시와 충청북도가 만나는 지점에 대청다목적댐이 준공되었다. 대청다목적댐은 높이 72m, 길이 495m, 체적 123만$4,000m^3$의 콘크리트 중력식 댐과 석괴식 댐으로 구성된 복합형 댐으로서, 이 댐의 주요시설로는 저수용량 14억9,000만$m^3$의 본 댐과 조정지 댐이 있다. 그 후 1992년에는 대청 조정지 댐 하류 200m 지점에 현도 지방 산업단지 취수장(시설용량: $17,600m^3$/일)이 건설되었으며, 통상 하루 약 7,500톤의 물을 인근의 공단에 공급해오고 있다. 하지만 최근, 취수량이 급격히 감소됨에 따라, 인근 공단으로의 물 공급에 많은 어려움이 발생하고 있다. 이에 대한 대처 방안으로서 한국수자원공사는 취수장 관리자의 요구에 따라 조정지 댐 방류 수문 위치조정 및 방류량 조절 등의 조치를 취하고 있지만, 그 효과는 정량적으로 검토되어지지 않았다. 그러므로 본 연구에서는 위에서 명기한 조치의 실효성을 파악 하고자, 수문의 위치변화에 따른 취수구 부근의 수리특성을 조사하였다. 구체적인 조사항목은 다음과 같다. 첫째, 하천용 유량측정장비 (StreamPro ADCP (Teledyne RD Instruments))를 이용한 방류구와 취수구 사이의 유량 조사 둘째, 다 항목 수질 및 3차원 유속 측정장비 (ADV6600 (Sontek / YSI, Inc.))를 이용한 취수구 앞에서의 유속, 유향 및 수위변동 조사 셋째, 수위계 (Orphimedes (OTT MESSTECHNIK GmbH & Co. KG)) 및 파고계 (Compact-WH (Alec Electronics Co., Ltd.))를 이용한 하천을 횡단하는 취수구 좌 우 지점에서의 수위변동 모니터링 그 결과 방류수문의 위치변화에 따른 취수구 인근의 수리학적 특성은 조정지 댐의 방류수문으로부터 약 100 - 150 m 하류의 횡단면에서는 유속분포의 차이가 발견 되었으나 하류로 흐름이 진행됨에 따라 그 차이는 감쇄되고 약 200m 떨어진 취수구 앞의 횡단면에서는 유속분포가 거의 동일함을 알 수 있었다.