• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.35-52
• /
• 2017

Interest and demand in heavy cargo logistics is increasing and becoming more diverse as economic scales have expanded and manufacturing activity has increased. Although cargo moves via maritime and/or land transportation, there is currently insufficient research on the actual condition of heavy cargo logistics. The purpose of this study is to carry out an in-depth analysis of heavy cargo laws, systems, logistics patterns, and current transportation status. By proposing measures to solve existing problems, this study aims to make an important and ongoing contribution to the scarcely studied field of heavy cargo logistics. The result of regression analysis on the main seven factors show that transportation frequency and law/system structure have a positive effect on working conditions. Furthermore, the result of correlation analysis on the main seven factors show that the cargo weight variable is highly positively correlated with cargo size. Also, the working conditions variable is highly positively correlated with the law/system structure. Detailed proposal measures to solve existing problems are summarized as follows. First, it is necessary to establish a clear concept of heavy cargo as numerous existing definitions differ. Second, laws and provisions relating to maritime and land transportation of heavy cargo need to be established and consolidated as current applicable legislation is insufficient. Third, the classification system for heavy cargo transportation needs improvement. Fourth, it is necessary to improve transportation performance statistics and the aggregate criteria system. Finally, the management system of heavy cargo also needs improvement.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.129-133
• /
• 2000

환경대기중 입자상물질의 검사방법은 환경부고시 97-98호(97. 11. 5)에 의거 고용량공기포집법(high volume air sampler), 저용량공기포집법(low volume ai sampler), 광산란법 및 광투과법 그리고 $\beta$흡수법 등으로 되어 있다. 이중 고용량공기포집법, 저용량공기포집법, $\beta$흡수법등은 중량법의 범주에 드는 측정법으로 되어 있다. 이들 방법 중 먼지채취전후의 무게를 직접 칭량하여 분석하는 고용량공기포집법은 총부유먼지의 측정법으로, 저용량공기포집법은 $PM_{10}$의 분석에 이용되는 것이며 $PM_{10}$ 고용량공기포집기($PM_{10}$ high volume air sampler) 또는 $PM_{10}$ 분석에 이용될 수 있다. (중략)

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.04a
• /
• pp.81-84
• /
• 2001

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.7
• /
• pp.333-338
• /
• 2016

This study is to estimate proximity without direct measurement of the weight of fresh ginseng. For this work, we developed a ginseng image acquiring instrument and obtained 126 ginseng images using the instrument. Image analysis and parameter extraction process was used C language based Labwindows/CVI development tools and open source library OpenCV. Estimation formula is made by weighing the sample with image analysis of fresh ginseng. We analyzed the correlation between the pixel number and the weight of ginseng using a linear regression approach. It was obtained a strong positive correlation coefficient of 0.9162 with a linearity value.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.282-289
• /
• 1999

선별은 청과물을 포장하기 이전에 크기, 중량, 색깔등 정해진 규격에 따라 고르는 과정을 말하고, 크게 인력선별과 기계선별, 개별선별과 공동선별로 구분한다. 국내의 경우 아직까지도 수확된 청과물은 농가단위로 개별선별하고 있으며, 중량식 선별기를 이용하여 등급선별 한 후 15kg, 10kg 상자에 포장하는 것이 가장 일반적이다. 근래에 청과물의 부가가치를 높이기 위해서 중량에 색깔을 선별할 수 있는 기능을 추가한 기계시스템이 개발되어 산업화된 바 있다(최 등, 1997). 또한 근적외선 분광분석법을 이용하여 과일의 당도를 비파괴적으로 측정 선별할 수 있는 시스템이 개발 실용화 단계에 있다(이 등, 1998). (중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.161-171
• /
• 2021

This paper presents the findings of a comparative study on minimum weight design and sensitivity evaluation using different experimental design methods for the structural design of an active-type deck support frame (DSF) developed for the float-over installation of an of shore plant topside. The thickness sizing variables of the structural members of a passive-type DSF were considered the design factors, and the output responses were defined using the weight and strength performances. The design of the experimental methods applied in the comparative study of the minimum weight design and the sensitivity evaluation were the orthogonal array design, Box- Behnken design, and Latin hypercube design. A response surface method was generated for each design of the experiment to evaluate the approximation performance of the design space exploration according to the experimental design, and the accuracy characteristics of the approximation were reviewed. Regarding the minimum weight design, the design results, such as numerical costs and weight minimization, of the experimental design for the best design case, were evaluated. The Box- Behnken design method showed the optimum design results for the structural design of the passive-type DSF.

• Clean Technology
• /
• v.14 no.2
• /
• pp.95-102
• /
• 2008

In order to choose alternative environmental-friendly cleaning agents, it is very important in the present point that the systematic selection procedures should be introduced and applied to the industry through the evaluation of their cleaning ability, environmental characteristics, and economical factors, and that the objective and effective evaluation methods of cleanliness should be established for the industry. Thus, a novel cleaning evaluation method utilizing optically stimulated electron emission (OSEE) among various methods of cleaning ability was studied in this study. The contaminants used in this cleaning experiments were flux, solder, grease, cutting oil, and mixed soil of 35% grease and 65% cutting oil. The cleaning agents developed or prepared in our laboratory were employed and their cleaning ability were comparatively evaluated by the OSEE, gravimetry and contact angle methods. The experimental results in this work showed that flux cleaning efficiency measured by the OSEE method was similar to that of the gravimetric method, but that the OSEE method could not be compared with gravimetric method for the case of solder or grease cleaning because the contaminants radiate or absorb ultra-violet light. In case of cutting oil cleaning, the gravimetric method indicated its limitation of cleaning efficiency of cutting oil since it showed cleaning efficiency of 100%, even though residual soil remaining on the substrate surface a little after its cleaning. The comparative experimental results of cleaning ability evaluated by the OSEE- and contact angle measurement methods showed that they were similar in case of cleaning of flux, mixed soil and cutting oil. It was judged that the contact angle measurement method could evaluate the cleaning ability more precisely than the OSEE method for cleaning solder and grease.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.49-52
• /
• 1998

1. 서론 : 화약이나 고체 충진제, 고체로\ulcorner 추진제의 산화제, slurry blasting agent 및 동물사료의 식품첨가제로 사용되고 있는 과염소산은 발화나 폭발성이 매우 강한 산화제로 정확한 순도를 측정하는 것은 중요하다. 용량분석법과 중량분석법에 비교하여 조작이 간단하고 편리한 과염소산이온의 농도를 직접 측정할 수 있는 PVC막 전극에 대한 많은 연구가 진행되고 있다. (생략)

• Clean Technology
• /
• v.15 no.2
• /
• pp.81-90
• /
• 2009

In this study various cleaning evaluation methods were tested and comparatively evaluated to help cleaning industry. In order to select alternative cleaning agents objectively and systematically, various cleaning evaluation methods such as gravimetric, optically simulated electron emission (OSEE), contact angle, and analytical instrument methods were employed for cleaning contaminants such as flux, solder and grease. The analytical instruments used in this work were Fourier transform infrared spectroscopy (FTIR), ultraviolet visible spectroscopy (UV-VIS) and high performance liquid chromatography (HPLC). The gravimetric method was able to measure cleaning efficiencies easily and simply, but it was not easy to analyze them precisely because of its limitation in the gravimetric measurement. However, the OSEE technique was able to measure quickly and precisely the clean ability of cleaning agents in comparison with the gravimetric method. The contact angle method was found to be necessary for taking special precaution in its application to the cleaning evaluation due to possible formation of tiny organic film on the substrate surface which might be generated from contaminants and cleaning agents. In case of precision analysis that cannot be done by gravimetric method, fine analytical instruments such as UV-VIS, FTIR and HPLC could be used in analyzing trace amount of flux, solder and grease quantitatively, which were extracted from the surface by special solvents.

• Journal of Radiation Protection and Research
• /
• v.24 no.3
• /
• pp.155-160
• /
• 1999

In the natural, there exist several kinds of radioactive isotopes. From atmospheric weapon tests and then some isotopes are naturally radioactivity above all things, nuclear power plant operation and man-made radioactive isotopes concern steadily growing in the environment. During the fission process of nuclear weapon tests and nuclear power plant operation, more than 200 radioactive isotopes are generated. Among them, $^{90}Sr$ and $^{137}Cs$ has been regarded as very important isotopes due to characteristics. In this paper, a quantitative analysis method of environment low level $^{90}Sr$ is studied. Radioactivity level of the environmental $^{90}Sr$ is very low, and it emits continuous beta spectrum, and $^{90}Sr$ exists together with $^{89}Sr$, $^{90}Y$ and other radioactive isotopes. It very difficult to make the quantitative analysis of $^{90}Sr$. For the analysis of low level radioactive strontium, enrich and chemical separation of strontium from the other radioactive isotopes are needed. For the estimation of strontium recovery ratio, so called SGAT(Strontium Gravimetric Analysis Technique) was generally used among the domestic research groups, and chemical procedures were developed appropriation for the SGAT, Recently, by using ICP(Inductively Coupled atomic Plasma emission spectrophotometer), amounts of stable atoms can be measured easily and accurately to the extend of ppm or ppb. In this paper, new chemical procedures are developed to exploits the ICP technique. New developed method has simpler chemical treatment procedures and then it gives more accurate results compared with the traditional SGAT.