• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.149-150
• /
• 2001

질산, 인산, 불산을 페수처리한 슬러지를 가열함에 따라서 아파타이트 결정으로 발달하는 과정을 살펴보면 질산칼슘의 분해에 따라서 아파타이트가 생성되지만 HF는 분해되지 않고, 결정내에 잔류하고 있다는 것을 알 수가 있다. 따라서 $900^{\circ}C$에서 2시간 소성한 아파타이트를 물에 용출시킬 대 HF가 용출되어 나오므로 그 사용에 제한이 되고 있다. 이러한 현상을 방지하고, 양론적인 아파타이트를 제조하기 위하여 인산 이온을 흡착 시키고 $900^{\circ}C$에서 2시간 소성한 결과 불소이온은 대폭적으로 감소되었고, Ca/P의 몰비는 양론적인 1.67에 근접하였고, 이 조건에서 합성한 아파타이트는 중금속의 흡착, 인 및 COD의 흡착, 제거율이 우수하였다.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.96-101
• /
• 1988

It is important to assess the effects of ionic strength and type of anions when studying the adsorption of heavy metals on zeolite because the background salt may complex with heavy metals and compete for adsorption sites. This experiment was carried out to determine the effect of ionic strength and anion species($Cl^-$, $SO^{2-}\;_4$, and $ClO^-\;_4$) on heavy metal adsorption. Heavy metal adsorption by zeolite from solutions in the range of 10 to 50ppm was studied in the presence of NaCl, $Na_2SO_4$ and $NaClO_4$, with different concentrations. The ionic strength ranged from 0.01 to 1.00. Adsorption of heavy metal cations could be described by the Freundlich isotherm equation. Increasing the ionic strength of equilibrium solutions, the amounts of heavy metal adsorbed on the zeolite surfaces decreased in all three of the anion systems. This fact could be attributed to the competition of background salt cation and the decrease in initial activity of heavy metal cations. In the presence of Cl anion, less adsorption resulted than in the presence of $SO_4$ or $ClO_4$ anions of the same ionic strength, indicating the presence of uncharged and negatively charged complexes of heavy metal with Cl ligands.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.421-424
• /
• 2002

산업이 고도로 발달되고 공업화로 인한 자원 및 에너지의 무분별한 사용으로 산업전반에 걸쳐 배출되는 폐수 중에는 다양한 종류의 중금속 등이 포함되어 있어 사회적인 문제가 되고 있다. 특히, 환경을 고려하지 않은 화학물질의 남용은 폐수에 의한 수질의 중금속 오염을 가중시켜 왔으며, 이러한 중금속 중 크롬은 인간의 생리활성에 영향을 미치고 먹이사슬에 따라 축적되어 궁극적으로는 인간에게 질병을 유발시키는 중금속 중에 하나로서 국제사회로부터 커다란 관심을 불러 일으키고 있다[1]. (중략)

• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.75-93
• /
• 1995

This study investigates the adsorption capacity of the gibbsite and the clay on the development of admixed liner. The gibbsite is produced as a by-product in the pretreatment process for cleaning and coloring of Alurninurn sash. From the study, following conclusions were obtained: 1) The adsorption of metals such as Cu(II), Cd(II), and Ni(II) and phenol on gibbsite and l:entonite was equilibrated rather quickly(12 ~48 hrs ). 2) The rate and extent of adsorption is a function of surface area the adsorbent having. 3) The Larigmuir isotherm is found to be more suitable than Freundlich isotherm for the adsorption analysis of heavy metals on gibbsite and bentonite. 4) In case of phenol, Freundlich isotherm, whose N value is close to 1, i.e., close to linear isotherm, is more fit to describe the adsorption on gibbsite and bentonite. 5) The amount of metals and phenol adsorbed is found to be in the following order : Adsorbent : $2{\mu}m-Al(OH)_3$ > Mixed Solid > $12{\mu}m-Al(OH)_3$ > Na-Bentonite > $30{\mu}m-Al(OH)_3$

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.7
• /
• pp.39-47
• /
• 2011

The objective of this study is to investigate the removal characteristics of cadmium(Cd) and lead(Pb) by adsorption on red mud and to study the adsorption characteristics of Cd and Pb using red mud activated by acid treatment and calcination. The adsorption of Cd and Pb on red mud was significantly achieved within 1hour and equilibrated after 5 hours. The adsorption capacity of Cd and Pb on red mud increased with increasing pH. The neutralization of red mud by distilled water or acid and the activation of red mud by acid treatment or calcination decreased the adsorption capacity of Cd and Pb on red mud, suggesting that Cd and Pb could be effectively eliminated by adsorption on red mud without any pretreatment or modification. Both Langmuir and Freundlich models were successfully applied to describe the adsorption behavior of Cd and Pb on red mud. The $q_m$ of Langmuir adsorption model and $K_F$ of Freundlich adsorption model were 5.230mg/g and 1.118mg/g for Cd and 22.222mg/g and 7.241mg/g for Pb, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.111-116
• /
• 2010

The treatment of heavy metal, in the waste ash from incinerator and mine solid waste, by using alkali-soluble acrylic copolymer emulsion, that is effective in the absorption of heavy metal has been studied. It seemed that alkali soluble acrylic copolymer emulsion was very effective in the absorption of Hg, Pb, Cd and Cu in this test. Also, eco-friendly thixotropic grout, using alkali soluble acrylic copolymer emulsion, that is effective in the absorption of heavy metal, for the recycling of waste ash from incinerator and mine solid waste has been tested. It was observed that waste ash could be used as a raw material of eco-friendly thixotropic grout mortar due to the effectiveness of alkali soluble acrylic copolymer emulsion in the fixation of heavy metals including $Cr^{6+}$ from waste ash in this test.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.4
• /
• pp.47-52
• /
• 2008

In this study, it was analyzed the soil components and elution characteristics of heavy metal ions in sediment samples to examine the effect of sediments embedded in Andong and Imha reservoirs on water quality. Major elements of sediments were shown to be Al, Si, K, and Fe by EDS analysis and major soil components of the collected 6 different sediments were illite (I), kaolinite (Ka), quartz (Q) and feldspar (F). And especially quartz took up a considerable part of sediments by XRD analysis. The total concentrations of Zn, As, Cr, Cu and Pb in sediments of Andong reservoir were relatively higher than those of Imha reservoir. The elution property of heavy metal from sediments had various aspects according to pH. Among the heavy metals in Andong reservoir sediments, As and Zn were significantly eluted at pH 6 compared with the other heavy metals. In the case of the adsorption tests using the sediments, the adsorptive capacities of Zn, Cd and Cu were very weak, on the while those of Pb and Cr were high.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1319-1330
• /
• 2000

Activated carbons prepared by chemical activation of organic waste sludges with $ZnCl_2$ and $K_2S$ have been studied in terms of their pore development and adsorptivity. Pore development of the carbons prepared from organic waste sludges was characterized by the nitrogen adsorption at 77K. The $ZnCl_2$-activated carbon produced by chemical activation with zinc chloride exhibited type I isotherm characteristics according to the BDDT classification, suggesting the presence of micropores formed by activation process. The isotherms of the commercial powdered activated carbon and $K_2S$-activated carbon reveal a hysteresis similar to that of type IV in BDDT classification, indicating the formation of mesopores. This result implies that the major pores of $K_2S$-activated carbon are composed of meso and micropores, and a macropores are minor. The adsorptive capacities of metal on the $K_2S$-activated carbon prepared from organic waste sludges were found to be superior to those on a commercial granular activated carbon. The Langmuir and Freundlich isotherms yield a fairly good fit to the adsorption data, indicating a monolayer adsorption of metals onto $K_2S$-activated carbon. The adsorptive capacity of the $K_2S$-activated carbon was superior to $ZnCl_2$-activated carbon for $PO_4$-P, and vice versa for $NO_3$-N. From the results of the studies reported here, it can be concluded that activated carbons with adsorptivity superior to commercial granular activated carbons can be produced from organic waste sludge using a two-step carbonization/activation procedure with zinc chloride or potassium sulfide as the activating agents.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.172-178
• /
• 2006

Mesoporous silicate materials have been used as adsorbents for the removal of heavy metals from water by introducing functional groups such as thiol and amine. In this research, it was investigated whether surfactants used as templating agents in synthetic processes can act as adsorption sites for heavy metals. Three mesoporous silicates-SBA-15, MCM-41, and HMS were synthesized using, respectively, block copolymer, hexadecyltrimethylammoniumbromide (HDTMA), and dodecyamine as surfactants. X-ray diffraction and $N_2$ gas adsorption analysis confirmed that the mesoporous silicates were well prepared and FT-IR spectra resulted in the existence of the surfactants in as-synthesized mesoporous silicates and the removal of surfactants after calcination. The interactions between $Pb^{2+}$ ions and the mesoporous silicate materials with/without surfactants were observed. In adsorption kinetic experiments, it revealed that the calcined mesoporous silicates and the surfactant-loaded SBA-15 almost had no adsorption capacity for $Pb^{2+}$ ions. In contrast, the surfactant-loaded MCM-41 and HMS showed, respectively, the adsorption capacities of 26.60 and 115.16 mg/g which were acquired through the fits of adsorption kinetic data to the pseudo second order kinetic model. The adsorption capacities were comparable to those of other mesoporous adsorbents for heavy metals.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.857-861
• /
• 2010

Recently photochemical smog has become a serious urban air pollution. And VOC is the major pollutant for it. With the advance of industrialization and urbanization, MSWI fly ash and sewage sludge and melting slag were generated. It is necessary to de-toxificate ashes, because they contain many toxic constituents and probably lead to contaminate the environment. The objective of this research was to prepare multi-functional brick which is able to remove VOCs in ambient air. The bricks were made of MSWI fly ash, sewage sludge and slag. The benzene adsorption experiment by brick was acted to evaluate its adsorptivity. And also photocatalyst material was coated to enhance its adsorptivity and the endurance on the brick. According to the result, the benzene showed 74~96%. The removal efficiency was increased and the breakpoint time was lengthened by coating a brick.