• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.446-451
• /
• 1999

This study was carried out to investigate some mineralogical characteristics of Artificial Granular Zeolite (AGZ) and effect of AGZ on purification and alleviation of rice seedling damages of mine wastewater containing heavy metals. AGZ had mainly representative Na-P1 peaks and some $C_3S$ peaks of Portland cement in X-ray diffractogram. Differential thermal analysis represented that AGZ had weak endothermic peak around $130^{\circ}C$ and new deep endothermic peak around $750^{\circ}C$ as compared to powdery artificial zeolite. The ranking of heavy metals removals by AGZ, was lead> copper> cadmium> zinc in the synthetic wastewater. Root growth of rice seedling was greatly inhibited in the mine wastewater, and died after all. As AGZ treated into the mine wastewater with the ratio 1 : 50 (W : V) for one day or 1 : 100 for 4 days, the concentrations of heavy metals in the mine wastewater were decreased to below the critical concentration for agricultural use. And rice seedlings were grew with little damages in the purified water by AGZ.

• Korean Journal of Environmental Biology
• /
• v.37 no.1
• /
• pp.60-67
• /
• 2019

The objective of this study was to verify the stability of nutrient composition by using herbal medicine by-products as an alternative food source and to examine the growth effect on Protaeria brevitarsis seulensis larvae. As a result of comparing the nutritional components of food source, crude protein, crude fat, and crude ash content, except crude fiber content, was high in both non-fermented and fermented medicinal herbal by-products. Especially, crude protein content was highest. Cadmium, lead, mercury, and other heavy metals were not detected and thus stability as alternative food was confirmed. The growth comparison based on the feeding sources showed no significant difference between the fermented oak sawdust fed control group and the herbal medicine by-products fed laboratory group from week 1 to week 3. The weight of a 4 week larva was 0.137 g in the control group and 0.671 g in the laboratory group and so began to reveal differences at a significant level (p<0.05). As a result of comparing weights of Protaetia brevitarsis seulensis larvae according to the level of herbal medicine by-product addition, HMB40 recorded the heaviest weight in week 7. Statistical analysis showed that there was no significant difference in each body weights of HMB40 and HMB80 at week 5 (p<0.05). These results indicate that if the shipping date of an edible insect is a third instar larva, it arrives at the time of shipment at week 5. Thus feeding HMB40 and HMB80 at the 5th week is the most effective.

• Analytical Science and Technology
• /
• v.21 no.6
• /
• pp.480-486
• /
• 2008

This paper reports on the monitoring results of some heavy metals (Pb, Cd, As and Hg) in oriental mineral medicines. Levels of Pb, Cd and As were determined using the acid digestion method and ICP-MS. Hg levels were determined using the gold amalgamation method and Automatic mercury analyzer (AMA). The results indicated that, in the case of Pb, 25.81% (24 cases) of the samples were over MRL (5 mg/kg). Pb levels in Calamina, Pumex, and Cinnabaris exceeded MRL (5 mg/kg). In the case of Cd, 9.68% (17cases) of the samples were over MRL (0.3 mg/kg). Cd levels in Calamina, Pumex and Cinnabaris were exceeded MRL (0.3 mg/kg). In case of As, 24.73% (23 cases) of samples exceeded MRL (3 mg/kg). As levels in Calamina, Lithargyrum, Vermilionum, Cinnabaris and Chalcocitum exceeded MRL (3 mg/kg). In the case of Hg, it was shown that the 76.34% (78 cases) of the samples exceeded MRL (0.2 mg/kg). Hg levels in almost all the samples exceeded MRL (0.2 mg/kg). These results led us to recommend that the domestic commercial law to be legislated to ensure the quality estimation and safety of oriental mineral medicines.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.113-125
• /
• 1999

Heavy metal elements were analysed to assess degrees of heavy metal contents for the plants, M. sinensis, A. vulgaris and G. oldhamiana, from the Baekdong serpentine area within the western part of Chungnam. The area was divided into two sites ; serpentine area (SP, consisting of serpentinite, SP) and non-serpentine area (NSP, containing amphibole schist, AS and gneiss, GN). Their host rocks(R) and top soils(S) were also collected from the each site. As the results of the study, the plants contain high concentration of Ni Cr, Co in the SP and Fe, Zn in the AS and GN. Plants from the AS of the NSP contain mainly high content in the most of elements. Averages of Ni, Co and Cr for the plants decreased in the order of SP, AS and GN. In the total element contents, M. sinensis and A. vulgaris decreased in the order of Fe > Ni or Cr > Zn > Co > As > Sc within the SP and in the order of Fe > Zn > Cr > Ni, within the GN. Comparing among the parts of plants, root parts were higher in the most of elements than the above grounds. In the relative element ratios of plants collected from the SP and GN (SP/GN) M. sinensis was lower than A. vulgaris in the most of elements, suggesting that the M. sinenis shows low absorption within the infertile serpentine soil and high absorption within the fertile gneiss soil. In the element contents of the top soils and their host rocks, the SP shows higher Ni, Co and Cr contents than the others. Their total contents decreased from SP to AS and GN, suggesting that the soils reflect the composition of their host rocks. Total element contents of the SP decreased in the order of Fe> Cr or Ni> Co> Zn> As> Sc and, for the GN, in the order of Fe> Zn> Cr> Ni> Co or Sc, respectively. In the relative element ratios, R/S of the SP decreased in the order of Cr> As> Fe> Sc> Co> Ni> Zn and for the GN, in the order of Sc> Fe> Ni> Zn> Cr> Co. Comparing with plants within the each site, their top soils were higher than the plants in the most of elements. and their increase and decrease trends for each element are similar. Differences of element contents between the top soils and plants decreased in the order of SP, AS and GN. Plants of the GN were moi-e similar to their soils than those of the others, suggesting that each plant species show different absorptions within the different soils. Comparing with the plants of GN, higher Ni, Co, Cr contents within those of the SP and their survival within the infertile serpentine soil suggest that the M. sinensis, A vulgaris and G. oldhamiana may be the tolerance species in the serpentine soil. Comparisons with the upper crust show that M. sinensis, and A. vulgaris within the SP show high Hi and Cr contents. suggestive of hyperaccumulation. Upper results with the previous studies for the contaminated soils developed as parent materials with the serpentinites suggest additional studies for ecological behaviors for the plant and degrees of accumulations for the elements need to know phytoextraction of the heavy metal elements within the soils.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2298-2304
• /
• 2012

X-ray fluorescence spectrum analysis method can be applied in many areas, including concentration analysis of RoHS elements and heavy metals etc. and we can get analysis results in a relatively short time. Because X-ray fluorescence spectrum has noises and several artifacts that lowers the accuracy of the analysis. This paper analyzes the characteristics of the noise of the X-ray fluorescence spectrum to increase the accuracy of analysis. X-ray fluorescence spectrum have the characteristics of shot noise (Poisson noise), so the noise size is relatively large in the small signal portion and the noise the size is relatively small in the large part of the signal. Existing methods of analysis and to remove noises is a method for general purposes algorithm. Since these algorithm does not reflect these noise characteristics, we get distorted analysis result. We can design efficient noise remove algorithm based on the accurate noise analysis method, and we expect high accuracy results of the elemental concentration analysis result.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.69-78
• /
• 2010

In order to investigate the degree of household dust contamination, 48 samples of household dust (24 from urban area and 24 from rural area) in Daegu city were collected in vacuum cleaner during January to February 2009. Samples were sieved below 100 ${\mu}m$, and 14 elements (Al, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, Zn) were analyzed using ICP after acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that Ca, Fe, K, Mg, Mn, Na, and V were influenced by natural sources such as weathered rock and resuspended soil, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources such as fuel combustion and waste incineration. Concentrations were remarkably higher in components from natural sources than in components from urban anthropogenic sources. Household dust in urban area was more affected by anthropogenic sources compared with that of rural area. Pollution index of heavy metals revealed that urban area was 1.8 times more contaminated with heavy metal components than rural area. The correlation analysis among trace elements indicated that components were correlated with natural sources-natural sources (Al-Mg, Al-Mn, Fe-Mn) and natural sources-anthropogenic sources (Al-V, Fe-Cr, V-Mn) in both urban area and rural area. Trace element components of rural area were more correlated than those of urban area. Houses that use oil for heating fuel had relatively higher contents of heavy metals rather than those using gas or electricity for heating fuel. Houses with children also had higher contents of heavy metals. In addition, the age of houses was found to influence the heavy metal levels in household dusts, with older houses (>10years) having higher concentrations than newer houses (<10years) and houses located near the major road (<10 m) were found to have relatively higher heavy metal levels in household dust.

• Electronics and Telecommunications Trends
• /
• v.24 no.6
• /
• pp.22-31
• /
• 2009

전 세계는 온실가스의 배출을 줄이기 위한 방안의 하나로 전 에너지 소비의 약 20%를 차지하고 있는 조명의 고효율화를 위한 노력을 다각적으로 벌이고 있으며, 그러한 노력의 일환으로 지난 100년간 사용되어온 백열등이 낮은 효율로 인하여 사용규제 논의의 대상이 되고 있다. 반면, 효율은 백열등의 7~8배인 형광등은 높은 효율에도 불구하고 수은과 납이 함유되어 중금속 사용규제(RoHs, WEEE)로 인하여 그 사용이 규제될 계획이다. 따라서, 백열등과 형광등의 빈자리를 채울 수 있는 친환경 차세대 조명에 대한 수요가 확대되고 있어 LED, OLED와 같은 반도체 조명에 대한 개발이 확대되고 있다. 본 기고서에서는 차세대 조명 중에서 OLED 기술을 기반으로 한 OLED 조명 기술과 선진국 및 선진산업체의 개발 동향을 소개하고자 한다.

• Clean Technology
• /
• v.9 no.2
• /
• pp.63-69
• /
• 2003

The metal finishing industry generates a variety of pollutants such as acidic or alkaline wastewater, chromic compounds, cyanide, heavy metals, and toxic materials. Especially, zinc plating process is one of the processes which cause serious environmental problems. In this study, we applied the proven optimum technology to important unit processes in terms of implement effects through the process diagnosis and analysis. This study aimed to improve the working environment and the environmental pollutions in zinc plating process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.2
• /
• pp.83-87
• /
• 1981

To use of industrial wastes as sources of fertilizer, the waste materials from 75 factories through-out the country were collected and analyzed. The wastes from fermentation, paper manufacture, food processing and textile industries might be useful sources of fertilizer. They contained high organic matters, nutrients and relatively low heavy metals.

• Journal of the Korean Society of Tobacco Science
• /
• v.30 no.1
• /
• pp.25-32
• /
• 2008

In this study, we compared three different pretreatment methods, such as block digestion, microwave digestion and solvent injection, coupled with Octopole Reaction System(ORS)-ICP-MS was used for the quantification of heavy metals in mainstream smoke of 2R4F reference cigarette, and then evaluated those efficiencies in the recovery, repeatability and reproducibility. In all methods, volatile heavy metals, As, showed the highest CV value, and Cd showed the lowest one. However, the solvent injection method showed the most stable recovery rate and CV value of 2.36 %. This method showed also advantages in time-consuming and compatibility with ICP-MS system. This results demonstrate that solvent injection method can be recommended as a superior pretreatment procedure to be able to reduce contaminants and spectral interference as well as loss of the elements interested.