• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.107-107
• /
• 2015

최근 기후변화로 인한 강우강도 증대, 산업화에 따른 토지개발 등으로 인하여 다량의 점착성 부유사(Cohesive Sediments)가 하천, 호소 등 수자원 환경으로 유입되고 있다. 점착성 부유사는 하천, 호소의 난류 조건에 따라 부유하거나 혹은 응집, 침전하여 하상 저니층을 형성한다. 부유사, 미생물 및 각종 유기입자가 포함된 하상 저니층은 검은색으로 외관상 보기 좋지 않을 뿐 아니라, 혐기성상태에서 부패하여 수생태계의 건강성을 해치게 된다. 또한 미세 부유사 및 미생물 입자는 각종 중금속, 유기오염물질을 흡착하고, 조건에 따라 재용출할 수 있는 저장매체로 작용하기 때문에 수자원환경에 미치는 영향이 아주 크다. 특히, 수중 미생물(조류) 작용에 의해 생성되는 EPS (Extracellular Polymeric Substances)는 부유사 및 미생물 입자들을 서로 엉겨 붙게 하여, 부유사-미생물 혼합 응집체 및 저니층 형성을 가속화하게 된다. 본 연구에서는 EPS가 부유사 응집에 미치는 영향을 파악하기 위하여, Xanthan Gum (Sigma-Aldrich, USA)을 EPS의 지표 물질로 사용하고, Kaolinite(Sigma-Aldrich, USA)를 수자원환경에 존재하는 대표적인 부유사로 사용하여 응집실험(Jar Test)을 수행하였다. 이온농도가 응집에 미치는 영향을 파악하기 위하여 수체 이온농도를 0.0001M NaCl, 0.001M NaCl, 0.01M NaCl, 그리고 0.001M NaCl + 0.1mg/L $Ca^{2+}$, 0.001M NaCl + 0.5mg/L $Ca^{2+}$, 0.001M NaCl + 1.0 mg/L $Ca^{2+}$으로 보정하여 응집실험을 수행하였다. 250 rpm 급속 교반 1븐, 50 rpm 완속교반 5시간, 침잔 1시간 후 응집체를 채취하여 응집체 이미지 분석을 통해 응집체 크기 및 형상을 측정하였고, 수표면 2 cm 지점에서 상등액을 채수하여 잔류 고형물 농도 분석을 실시하였다. 응집실험을 통하여 다음과 같은 결과를 도출하였다.. 낮은 이온농도의 경우, EPS가 큰 고분자 구조체에 부유 입자들이 엮어 응집되는 Sweeping Flocculation의 특징을 나타내었다. 하지만, 이온농도가 높아질수록 경우, EPS 고분자 구조체 내부 반발력이 감소하여 크기가 축소되고, 이에 따라 부유 입자 표면에 패치 형태로 흡착되었다. EPS가 패치형태로 입자에 흡착한 경우, 응집제 농도 증가에 따라 응집능 최적점이 형성되고, 이후 표면하전 역전이나 Steric Stabilization에 의해 응집능이 저감되는 형태를 나타낸다. 따라서,수중이온농도가 EPS의 사슬형 고분자 응집제의 크기, 형태(Morphology)를 결정하고, 더 나아가 응집능을 결정하는 중요한 인자로 나타났다. 따라서, 후속 연구를 통하여 생체고분자물질의 크기 및 형태 변화, 이에 따른 응집능변화를 면밀히 연구하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.451-457
• /
• 2019

In this study, the characteristics of coffee grounds were reviewed by making them from solid fuel through heat-drying and oil-drying method. The differences in the higher calorific power by each dried sample were compared. And industrial analysis using the thermogravimetric analyzer was considered for applicability to organic waste and oily samples. Before and after drying, the surface of the specimen was observed with SEM equipment and the ingredients were measured through the EDS equipment. As a result, no other hazardous substances, such as heavy metals, were measured. Next, The differences between thermal decomposition and combustion reactions were considered through the TG and DTG curves. As a result, it is that the oil-dried coffee grounds is longer to burn than the heat-dried coffee grounds. Finally, the combustion gases emitted through the thermogravimetric analyzer were collected and the carbon monoxide and carbon dioxide performed qualitative and quantitative analysis using GC over time.

• Korean Journal of Microbiology
• /
• v.55 no.1
• /
• pp.69-73
• /
• 2019

During screening of microbes for compounds having cosmetic benefits, we isolated Marinobacter salarius HL2708#2 from lava seawater on Jeju Island, Republic of Korea. The complete genome sequence was determined. Strain HL27080#2 features a circular chromosome of 4,304,603 bp with 57.21% G+C content and a 244,163 bp plasmid with 53.14% G+C. There were 4,180 protein coding sequences identified, along with 49 transfer RNA and 18 ribosomal RNA noncoding genes. The genome harbored genes for the utilization of alcohol, maltose/starch, and monosaccharide as sole carbon sources. Genes responsible for halophilic characteristics and heavy metal resistance could be annotated, as well as aromatic and alkane hydrocarbons. Contrary to the prior report that M. salarius is negative for nitrate and nitrite reduction, nitrate/nitrite reductase along with nitrate/nitrate transporters and nitronate monooxygenase were evident, suggesting that strain HL2708#2 may be able to denitrify extracellular nitroalkenes to ammonia.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.107-112
• /
• 2018

The purpose of this study was to investigate the migration levels of lead (Pb), cadmium (Cd) and arsenic (As) from polycarbonate food contact materials into food simulant at different temperatures ($70^{\circ}C$ and $100^{\circ}C$). The method was validated by linearity of calibration curves, limit of detection (LOD), limit of quantification (LOQ), recovery, precision and uncertainty. All of 200 samples, including bottles, cups, containers, ladles, spoons and tongs were purchased from domestic markets and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Mean concentrations of positive samples were higher at $100^{\circ}C$ than $70^{\circ}C$ as showing a dependency of migration temperature. The migration concentrations ranged from not-detected (ND) to $4.67{\mu}g/L$, ND to $0.49{\mu}g/L$L and ND to $2.91{\mu}g/L$ for Pb, Cd and As, respectively, which were far below the migration limits of Korea standards and specifications for food utensils, containers and packages.

• Journal of Life Science
• /
• v.29 no.9
• /
• pp.996-1001
• /
• 2019

Edible insects are reported to be rich in protein, minerals and vitamins, and much attention has been paid to them as a future food source. In Korea, they were massively reared and sold. In order to enhance the market value of edible insects for industrialized mass production, it is important to develop the safe and nutritious feed sources for rearing them are needed. In this study, a chlorella-free control feed (Exp1) and six experimental feeds supplemented with 0.5~2.0% liquid or powder types of chlorella were formulated. Protaetia brevitarsis and Allomyrina dichotoma, registered as food ingredients in Korea, were fed with the designed feeds and parameters of growth including larval survivorship, larval body weight, and larval period were analyzed. When chlorella added, larval survivorship was increased 2~13%(p>0.05) and 9~22%(p<0.05) in each beetle compared to the control. Interestingly, the larval period of chlorella powder-added groups was shortened by 24 days (Exp3, p<0.05) in P. brevitarsis and 19 days (Exp4, p<0.01) in A. dichotoma. Meanwhile, some parameters, crude protein, crude fiber, copper, zinc, potassium, magnesium, and phosphorous, in chlorella-added groups of P. brevitarsis were also higher than the control group. Therefore, chlorella could promote the larval growth performance of these two beetles and be used as a feed additive in rearing them.

• Clean Technology
• /
• v.26 no.4
• /
• pp.263-269
• /
• 2020

Zeolite was synthesized hydrothermally using the water-treatment sludge, and the effects of various synthesis parameters like reaction temperature, reaction time, and Na2O/SiO2 molar ratio on the crystallization of zeolite were investigated. Crystal structure, physical property, and thermal stability of zeolite crystals were characterized by X-ray powder diffraction, FTIR spectroscopy, BET nitrogen adsorption, and TGA measurements. The removal efficiencies of nitrogen in ammonia, heavy metal ions, and TOC were calculated to evaluate zeolite's adsorption capacity. The primary chemical composition of water-treatment sludge was 28.79% Al2O3 and 27.06% SiO2. The zeolites were synthesized by merely employing the water-treatment sludge as silica and alumina sources without additional chemicals. Zeolite crystals synthesized through the water-treatment sludge were confirmed as an A-type zeolite structure. Zeolite A had the highest crystallinity obtained from a gel with the molar composition 2.1Na2O-Al2O3-1.6SiO2-65H2O after 5 h at a temperature of 90 ℃. The specific surface area of zeolite obtained was 55 ㎡ g-1, which was higher than commercial zeolite A. The removal efficiency of nitrogen in ammonia was 68% after 3 h of reaction time, while the removal efficiencies of Pb2+ and Cd2+ ions were 99.1% and 99.3%, respectively. These results indicate active ion exchange between Pb2+ or Cd2+ ion and Na+ ion in the zeolite framework. The adsorption experiments on the different zeolite addition conditions were performed for 3 h with 300 ppm humic acid. Based on the results, TOC's highest efficiency was 83% when 5 g of zeolite was added.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.118-127
• /
• 2021

Recently, the public's interest in the air environment has increased, and public health is threatened by fine particulate matter. Furthermore, the government continues efforts to improve air quality by expanding the monitoring of air pollutants and reinforcing environmental standards. Since air quality differs depending on the region in the Korean Peninsula, it is currently necessary to identify the cause and search for influencing factors. In this study, the atmospheric environment and regional differences in cities located in the Chungnam Province were observed. As a research method, regression analysis was performed for weather conditions, such as temperature, wind speed, precipitation, and season and targeted at air pollutants, such as SO₂, NO₂, CO, O₃, PM₁₀, and PM_2.5, as well as heavy metals contained in particulate matter, such as Pb, Cd, Cr, Cu, Ni, As, Mn, Fe, Al, Ca, and Mg. In the case of PM₁₀, the concentrations of Mn(0.4884) in Cheonan, CO(0.3329) in Dangjin, and Mg(0.5691) in Seosan were highest. In the case of PM_2.5, Cheonan NO₂(0.4759), Dangjin CO(0.4128), and Seosan NO₂(0.3715) were significantly affected. In summary, the influencing factors vary according to the region in Chungnam province in terms of air quality, and there is a difference in the degree of contribution. Therefore, it is considered that the Korean government's management of air quality is required for each region.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.389-398
• /
• 2022

Many studies have been conducted to accurately predict the correlations between As and heavy metals content in contaminated soil and cultivated crops; however, due to the low correlation between the two, few clear results were obtained to date. This study aimed to create statistical models that predict the As content transferred from soil to polished rice, considering the physicochemical properties of the soil, as well as the total content and the single-extracted content of As in the soil. Predictive models were derived through regression analysis while sequentially classifying soil samples according to pH, soluble As content by single extraction, and organic matter content of the soil. The correlation coefficients between the As content in 80 polished rice and total As content and Mehlich soluble As content in the soil were low, 0.533 and 0.493, respectively. However, the models derived after sequential classification of the soil by pH, a ratio of total As content to Mehlich soluble As content, and organic matter content greatly increased the predictive power; ① 0.963 for 13 soils with a pH higher than 6.5, ② 0.849 for 15 soils with pH lower than 6.5 and a high ratio of As_Tot/As_Mehlich, ③ 0.935 for 30 soils with pH lower than 6.5, a high ratio of As_Tot/As_Mehlich, and organic matter content lower than 8.5%. The suggested prediction model of As transfer from soil to polished rice derived by soil classification may serve as a statistically significant methodology in establishing a rice cultivation standard for arsenic-contaminated soil.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.87-95
• /
• 2023

Recently, redevelopment of the original downtown area is underway, the necessity of construction in adjacent location is increasing. However, excavations in dense urban areas are prone to ground problems due to various causes, so it is necessary to use materials and methods that can minimize such problems. As a general earth retaining method, various methods such as diaphragm wall and CIP method are applied using cement. However, since a large amount of cement is used for the installation of earth retaining method, it is necessary to conduct research on the development of new cement substitute materials to significantly reduce greenhouse gas emissions. In this study, we utilized the hardening reaction of blast furnace slag powder, desulfurized gypsum and high calcium fly ash by alkali activation and applied it to the SCW method. As a result, it was analyzed that the compressive strength of solidified soil using development solidification material was 96.2 ~ 106.3% of OPC at 28 days of curing. In addition, the strength increment ratio was 2.06 for sandy soil and 2.41 for clayey soil, which was higher than 1.85 of OPC. It seems an advantageous in terms of long-term strength. In addition, from the environmental point of view, it was analyzed that there is no elution of heavy metals and that greenhouse gas emissions can be dramatically reduced. Therefore, if further studies are conducted, it can be applied to the SCW method.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.331-341
• /
• 2023

When creating a soil contamination map using geostatistical techniques, there are various sources that can affect prediction errors. In this study, a grid-based soil contamination map was created from the sampling data of heavy metal concentrations in soil in abandoned mine areas using Ordinary Kriging. Five factors that were judged to affect the prediction error of the soil contamination map were selected, and the variation of the root mean squared error (RMSE) between the predicted value and the actual value was analyzed based on the Leave-one-out technique. Then, using a machine learning algorithm, derived the top three factors affecting the RMSE. As a result, it was analyzed that Variogram Model, Minimum Neighbors, and Anisotropy factors have the largest impact on RMSE in the Standard interpolation. For the variogram models, the Spherical model showed the lowest RMSE, while the Minimum Neighbors had the lowest value at 3 and then increased as the value increased. In the case of Anisotropy, it was found to be more appropriate not to consider anisotropy. In this study, through the combined use of geostatistics and machine learning, it was possible to create a highly reliable soil contamination map at the local scale, and to identify which factors have a significant impact when interpolating a small amount of soil heavy metal data.