• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 가을 학술발표논문집 Vol.31 No.2 (1)
• /
• pp.160-162
• /
• 2004

기존의 웹 문서 분류 시스템서는 많은 시간과 노력을 요구하며, 연관 단어가 아닌 단일 단어만으로 웹 문서들을 분류하여 단어의 중의성을 반영하지 못해 많은 오분류가 있었다. 이러한 문제점을 해결하기 위해 본 논문에서는 협력적 필터링을 위한 연관 단어 빈도를 사용한 웹 문서 분류 방법을 제안한다. 제안된 방법에서는 웹 문서 내에서 단어들을 추출하고 빈도 가중치를 계산한다. 추출된 단어를 Apriori 알고리즘에 의해 연관 규칙을 생성하고 신뢰도에 단어 빈도 가중치를 반영한다. 수정된 신뢰도를 ARHP 알고리즘에 적용하여 연관 단어들 사이의 유사정도를 계산하고 유사 클래스를 구성한다 생성된 유사 클래스들을 기반으로 웹 문서를 $\alpha$-cut을 이용하여 분류한다 성능평가를 위해 기존의 문서 분류 방법들과 비교 평가를 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.894-895
• /
• 2007

This paper presents coupled analysis between finite element method and analytic technique for predicting temperature rise of 25.8kV 25kA three-phase GIS bus bar. The power losses and temperature distribution of three-phase GIS bus bar model are analyzed by magneto-thermal finite element method. The heat transfer coefficients on the boundaries are analytically calculated by applying Nusselt number considering material constant and model geometry for the natural convection. And these are used as the input data to predict the temperature rise of three-phase GIS bus bar model by coupled magneto-thermal F.E.A. The predicted temperature of 25.8kV 25kA three-phase GIS bus bar model shows good agreement with the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.990-992
• /
• 2005

This paper presents a new magneto-thermal finite element analysis for predicting the temperature rise of the EHV GIS bus bar. The power losses of a bus bar calculated by the magnetic field analysis are used as the input data to predict the temperature rise for the thermal analysis. The heat-transfer coefficients on the boundaries are analytically calculated by applying the Nusselt number considering material constant and model geometry for the natural convection. The temperature distribution in a bus bar by coupled magneto-thermal finite element analysis shows good agreement with the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.993-995
• /
• 2005

Recently, the efficiency of power transformer is improved as well as the size is becoming smaller. So, it is very important that temperature characteristics of the transformer should be estimated and predicted precisely. This paper deals with the temperature distribution of power transformer by simplified 2-D hybrid mesh model. The temperature distribution of model transformer was obtained by CFD algorithm considering natural convection. Heat sources are calculated first by magnetic field analysis based on F.E.M. and are usedas the input data for thermal field problem based on computational fluid dynamics(CFD) algorithm. The calculated temperature distribution of the simplified 2-D power transformer model shows good results in accuracy as well as in computing time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.996-998
• /
• 2005

전기철도나 지하철 분야에 사용되고 있는 고속 DC 차단기의 조작부는 solenoid actuator 방식이나 motor charging 방식을 주로 채택하고 있으나 구조가 복잡하고 부품수가 많아 부피가 크다는 단점이 있다. 이에 반해 magnetic actuator 방식은 동작시간과 제어가 용이하고 부품수가 감소하여 신뢰성과 반복성이 뛰어나다. 본 논문에서는 고속 DC 차단기 조작부를 영구자석 엑추에이터(PMA)방식으로 적용하고자 영구자석(PM)의 개략적 설계 및 이를 이용한 PMA 설계를 하였고, 유한요소 해석을 통해 이들의 동작특성을 해석하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.686-689
• /
• 2014

본 논문은 다극 BLDC(Brushless Direct Current) 전동기를 구동하기 위한 인버터 게이트 구동회로 일체형 스위칭 모듈인 IPM(Intelligent Power Module)에 대한 연구이다. 여러 제조사의 IPM을 이용하여 인버터를 설계할 때 각 제조사와 IPM의 버전에 따른 전기적, 논리적 특성을 평가하는 전자회로 시스템을 설계한다.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.62-70
• /
• 1996

We experimented on cutting characteristics-cutting force, behavior of cutting temperature, surface roughness. chip thickness under low temperature, which generated by liquid nitrogen(77K). The work-pieces were freezed to-195 .deg. C and liquid nitrogen was also sprinkled on cutting area in order to decrease an experimental error of machining in low temperature. The workpiece was became to -195 .deg. C in5 minutes. In cooled condition surface roughness of workpiece was better than normal condition. In addition, we investigated the possibility that surface roughness of workpiece and cutting force can be predicted analyzing cutting conditions by the trained neural network.

• 한국가시화정보학회지
• /
• 제21권2호
• /
• pp.72-82
• /
• 2023

Effective thermal management in a battery electric vehicle (BEV) is crucial for reducing energy consumption and maximizing driving range in cold climates. Consequently, original equipment manufacturers are actively investing in the development of local heating systems. Visualizing occupant thermal behaviors or comfort can readily provide valuable insights that would substantially impact the design and control strategies of such microclimate systems. This study uses MATLAB for three-dimensional visualization of human thermal psychology. The developed program enables qualitative assessment of occupant comfort in BEVs.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 추계학술발표대회
• /
• pp.874-877
• /
• 2008

Nowadays the existing data processing systems can only support some simple query for sensor network. It is increasingly important to process the vast data streams in sensor network, and achieve effective acknowledges for users. In this paper, we propose a holistic distributed k-means algorithm for sensor network. In order to verify the effectiveness of this method, we compare it with central k-means algorithm to process the data streams in sensor network. From the evaluation experiments, we can verify that the proposed algorithm is highly capable of processing vast data stream with less computation time. This algorithm prefers to cluster the data streams at the distributed nodes, and therefore it largely reduces redundant data communications compared to the central processing algorithm.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 추계학술발표대회
• /
• pp.779-781
• /
• 2007

Nowadays, as the increasing functionality and scales of embedded systems, system design grows more complex than before. So verification and simulation of systems become an important facet in hardware-software co-design issues. But it is almost impossible to simulate an embedded system without real hardware implementation or environment communication, especially for control-dominated reactive systems. Therefore, in this paper, we will introduce a GUI environment module generator for integrated Esterel\C++ simulation. By generating the GUI modeling environment, we can simulate and verify the whole embedded system conveniently.