• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.311-316
• /
• 2017

기후변화는 물 관리 측면에서 많은 변화를 일으키는 것으로 보고되고 있다. 주로 강우의 패턴을 변화시키며, 가용수자원의 지역적 편중을 심화시킨다. 기후변화에 적응하며 안정적이고 균등한 용수확보를 위해서는 홍수와 가뭄을 고려한 연속적인 물 순환 해석기술이 필요하다. 강우유출분석은 강우사상에 대한 수문순환과정을 통해 유출량을 산출하는 것으로, 주로 직접유출과 중간유출이 이에 해당된다. 강우발생 이후 무강우기간에 대해서는 기저시간 이후에 발생되는 유출량의 정량적 산출이 필요하다. 기저유출은 강우 발생 시점에 급격히 발생하기보다는 선행강우에 따른 유역 내 지하수위 분포와 대수층의 특성, 하천수위에 따라 다양한 패턴으로 나타나기 때문에 지하수대의 수리학적 성분들을 반영할 수 있어야 한다. 이를 위해서는 강우유출모의 시 지표유출량 산정과 지하수유동해석을 통한 기저유출량 산정이 동시에 이루어져야 한다. 최근 국내외에서는 다양한 형태의 수문모형과 MODFLOW를 연계한 장기유출분석에 대한 연구가 활발하게 진행되고 있다. 본 연구에서 활용한 K-DRUM(K-water Distribution Runoff Model)은 K-water에서 자체 개발한 물리적 기반의 분포형 강우유출모형으로 강우유출, 유사, 기초수질항목에 대한 3차원 분석이 가능하다. 본 모형의 A층(표층)은 지표유출을 고려한 운동파법이 적용되었고, B층과 C층(중간층), D층(지하수층)은 선형저류법이 적용되었다. MODFLOW(A Modular Three-Dimensional Finite-Difference Ground Water Flow Model)는 1980년대 USGS(United State Geolog ical Survey)에서 개발된 가장 범용적으로 사용되는 지하수유동모형이며, 모듈화 된 구조를 갖고 있어 다양한 패키지 중 필요로 하는 기능을 독립적으로 모의할 수 있는 장점이 있다. 본 연구에서는 향후 기후변화에 따른 강우의 불확실성에 대비한 유역의 장기 물순환 해석을 위해 강우유출모형인 K-DRUM과 지하수유동모형인 MODFLOW를 연계하고자한다. 연계방법은 K-DRUM에서 계산된 D층으로 침루되는 양을 MODFLOW의 함양량으로 적용하고, MODFLOW에서 산출된 기저유량을 K-DRUM의 하천유출에 적용하는 것이다. 본 연구의 성과를 갈수기 유출해석에 적용하면 정확성을 크게 향상시킬 수 있을 것으로 판단된다.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.763-767
• /
• 2019

In this study, thermal decomposition characteristics of exo-tetrahydrodicyclopentadiene (exo-THDCP) composed with a single compound were analyzed by using a flow reactor. The experiments were carried out at $500^{\circ}C$, 50 bar and the products of each flow rate condition were analyzed by using a GC/MS. As a result, it was confirmed that exo-THDCP was decomposed mainly into cyclic compounds and a part was isomerized by heat. As the flow rate was increased, the kinds and ratio of compounds produced through the decomposition and isomerization were decreased. Also, the conversion rate of exo-THDCP and the amount of heat absorbed during the decomposition were also decreased. The compounds rapidly produced by decomposition were mainly formed through the radical form of 1-cyclopentylcyclopentene (1-CPCP) which is one of the intermediates that can be formed from exo-THDCP because it has the lowest activation energy of 42 kcal/mol.

• Korean Journal of Breeding Science
• /
• v.42 no.3
• /
• pp.298-301
• /
• 2010

A new intermediate parent 'Wonye 30002' (Allium cepa L.) was developed by Bioenergy Crop Research Center, NICS in 2009. As a male sterile line, 'Wonye 30002' can be used to hybrid seed production by crossing with pollen parent. The first cross was conducted between male sterile plants of 402AC203 and M1 in 2002. The male sterile line 'Wonye 30002' has circular bulb and bulb weight is 283 g. As early maturing type, lodging date is May 6. Plant height and pseudostem diameter are 43 cm and 15.5 mm, respectively. In seed harvesting characteristics, number of flower stalks and the length are 43 cm and 110 cm, respectively. The flowering date of 'Wonye 30002' is around May 24 and is completely male sterile. 'Wonye 30002' is a promising male sterile line for hybrid bulb onion seed production.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.141-151
• /
• 2023

Traditional ODA to North Korea (NK) has been unsustainable and politically contentious. This study proposes the design of appropriate technology (AT) as an alternative. We identified NK residents' urgent needs and global AT instances, and classified data by Maslow's hierarchy of needs. As electricity and potable water were identified as primary needs, suitable AT cases were selected. Given NK's extreme isolation, collaborative AT practices with local residents are unfeasible. Therefore we propose a new AT adoption model customized to NK, which emphasizes community-level adoption. We proposed a solar charging station for cooperative farms, a re-design of an AT previously utilized in Africa, and tailored it to fit our proposed model. The study's significance lies in its novel AT adoption model for NK's unique social fabric and the proposition of a specific design case, thus transcending previous relevant studies exploring AT's potential for NK.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.26-26
• /
• 2021

메밀(Fagopyrum esculentum Moench)은 마디풀과(Polygonaceae) 메밀속 (Fagopyrum)으로 약 20종이 있으며, 전 세계 인류 역사와 함께해 왔으며, 오랫동안 사랑을 받아 온 작물이다. 메밀 생태형 분류는 늦게 파종할수록 종실 수량이 떨어지는 여름메밀, 반대로 늦게 파종할수록 종실 수량이 증가하는 가을메밀과 중간형 메밀이 있다. 여름메밀 대표품종은 양절메밀, 양절메밀2호가 있다. '양절메밀'은 춘파·하파 재배가 가능한 여름메밀 품종으로, 1994년 육성되어 장려 품종으로 결정되었다. '양절메밀'의 특성은 유한생육 초형으로, 조숙·단간·다수성 이며, 꽃색은 흰색이며 종자는 흑색이다. 성숙일수는 60-64일로 짧으며, 성숙 후에도 탈립이 강하고, 경장은 단간으로, 도복에 강한 편이다. 그 후 수량성이 증가된 '양절메밀 2호'가 육성되었다. 양절메밀2호는 대립종자로 종자가 흑갈색이며 천립중도 29.5g으로 양절메밀보다 무겁다. 가을메밀로는 대산메밀, 다원 및 순백이 육성되었다. 싹용인 '대산메밀'은 줄기가 연홍색이고 종자가 갈색이었다. '대산메밀'은 가을메밀 품종으로 가을 재배에 적합하다. 경장은 중장간종이며, 생육 일수는 양절메밀보다 약간 늦은 중생종이다. 메밀싹 수율이 높아 새싹 재배에 적합한 것으로 나타났다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1301-1306
• /
• 2006

Aluminum alloys are gaining increased acceptance in the automotive and electronic industeries and cold & hot forging is the most efficient method of manufacturing such mass produced parts. This study has been investigated the microstructures and mechanical properties of A6061(Al-1.2Mg-0.8Si) alloy fabricated by cold & hot forging process for development of the future compressor block. The microstructure of cold & hot forginged specimen were composed of eutectic structure aluminum solid solution and $Mg_2Si$ precipitates. The tensile strength of as-solid solution treatment A6061 alloy revealed 291.7MPa. It was fabricated that a trial future compressor cylinder block using cold & hot forging.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.650-656
• /
• 1995

Rate Constants of hydrolysis of N-(benzenesulfonyl)-C-(N-methylanilino)imidoyl chlorides were determined by UV spectrophotometry in 50% (v/v) aqueous methanol at 25$^{\circ}C.$ On the basis of rate equation, substituent effect, solvent effect, salt effect, thermodynamic parameters and hydrolysis product analysis, it may be concluded that the hydrolysis of N-(benzenesulfonyl)-C-(N-methylanilino)imidoyl chlorides proceed through $S_N1$ mechanism via azocarbonium ion intermediate below pH 9.0, while aebove pH 10.0 the hydrolysis proceeds through nucleophilic addition-elimination ($Ad_{N-E}$) mechanism.

• Journal of KIISE:Software and Applications
• /
• v.28 no.12
• /
• pp.955-965
• /
• 2001

We propose a systematic method of compiling Haskell based on the spineless Tagless G-machine (STGM) for the Java, Virtual Machine (JVM) We introduce an intermediate language called L-code to identify each micro-operation of the machine by its instruction, Each macro operation of the machine is identified by a binding Each instruction of the L-code can be easily translated into Java statements. After our determination on representation and L-code program from a STG program is translated into Java program according to out compilation rules. Our experiment shows that the execution times of translated benchmarks are competitive compared with those in Haskell interpreter Hugs, particularly when Glasgow Haskell compiler's STG -level optimizations are applied.

• Journal of KIISE:Software and Applications
• /
• v.34 no.4
• /
• pp.317-327
• /
• 2007

In this paper, a systematic approach of developing detail 00 designs from Component-and-Connector Architectures (CCAs) is proposed. In this approach, an intermediate model between the architecture model and the detail design model specified with class diagrams or sequence diagrams is introduced to narrow the wide gap between the two abstraction levels. Once a CCA is designed, candidate classes and their relationships are identified per each architectural element. In order to show the efficacy of this approach, we apply it to an industry software development project and verify that quality attributes supported by the CCA are equally maintained by the detail design.

• The Korean Journal of Zoology
• /
• v.29 no.1
• /
• pp.61-69
• /
• 1986

Teter and Boczkowski (1966) classified testicular feminization syndrome into two groups; One with no pubic hair and normal clitoris (A group) and the other with pubic hair and enlarged clitoris (B group). However, the patient discussed in this paper shows a mid-form of these two groups (C group). To find out differences among A, B and C groups, we have observed the micro-structure of testes removed from her inguinal canal and analyzed the chromosomes obtained from testicular and blood culture. Her seminiferous tubules show some differences in the maturation and distribution of Leydig and Sertoli cells and in the thickening of basement membrane as compared with group A and B. We suppose that such differences are responsible for the morphological changes of clitoris and pubic hair.