• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.142-147
• /
• 2007

In this study, mesoporous tin oxide was synthesized by sol-gel method using $C_{16}TMABr$ surfactant as a template in a basic condition. The optimum conditions for the synthesis of mesoporous $SnO_2$ were investigated and the obtained samples were characterized by XRD, nitrogen adsorption and TEM analysis. A mesoporous and nanostructured $SnO_2$ gas sensor with Au electrode and Pt heater has been fabricated on alumina substrate as one unit via a screen printing process. Sensing abilities of fabricated sensors were examined for CO and $CH_4$ gases, respectively, at $350^{\circ}C$ in the concentration range of 1~10,000 ppm. Influence of loading amount of palladium impregnated on $SnO_2$ was also tested in detection of those gases. High sensitivity to detecting gases and the fast response speed with stability were obtained with the mesoporous tin oxide sensor as compared to a non-porous one under the same detection conditions.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.391-396
• /
• 2015

To investigate the effect of the catalyst synthesis method on the oxidative dehydrogenation (ODH) of nbutenes, $BiFe_{0.65}MoP_{0.1}$ oxide catalysts were prepared with various synthesis methods such as co-precipitation, citric acid method, hydrothermal method, and surfactant templated method. The catalysts were characterized by X-ray Diffraction (XRD), $N_2$ sorption, and $NH_3/1$-butene-temperature programmed desorption ($NH_3/1$-butene-TPD) to correlate with catalytic activity in ODH reaction. Among the catalysts studied here, $BiFe_{0.65}MoP_{0.1}$ oxide catalyst prepared with co-precipitation method marked the highest activity showing 1-butene conversion, 79.5%, butadiene selectivity, 85.1% and yield, 67.7% after reaction for 14 h. From the result of $NH_3$-TPD, the catalytic activity is closely related to the acidity of the $BiFe_{0.65}MoP_{0.1}$-x oxide catalyst and acidity of the $BiFe_{0.65}MoP_{0.1}$ oxde catalyst prepared with co-precipitation method was higher than that of other catalysts. In addition, combined with the 1-butene TPD, the higher catalytic activity is closely related to the amount of weakly adsorbed intermediate (< $200^{\circ}C$) and the desorbing temperature of strongly adsorbed intermediates (> $200^{\circ}C$).

• Journal of Korea Foundry Society
• /
• v.5 no.3
• /
• pp.47-51
• /
• 1985

FMC(FULL MOLD CASTING)법(法)이란 발포 polystyrene모형을 사용하여 조형후, 주형으로부터 모형을 발형치 않은채, 용탕을 주입하여 주물을 제조하는 방법을 말한다. 합성수지 발포체를 주조용(用) 모형의 재료로써 사용하는 방법은 1956년 미국의 슈로이어(H. F. Shroyer)에 의하여 발명되었으나 이것은 실제 주조에 응용하기에는 여러 곤란한 문제가 있어, 단순히 착상에 그치고 공업적으로 적용할 수 있는 기술을 확립치는 못하였다. 그후 서독 아헨대학교수로서 당시 발포폴리스티렌을 포함하는 각종단열재 제조회사 G+H 사(社)의 A. Wittmoser에 의하여 1962년에 처음으로 공업적으로 이용되어, 현재 서독, 미국, 일본등 유럽전역에서 응용되고 있다. 당사(當社)는 1977년6월 5일 첫 가동된 이후, 동(同)그룹 사(社)인 현대자동차로부터 자동차금형 (Press Die)주조를 FMC법(法)으로 생산하여 달라는 요구를 받고, 그해 12月부터 개발시험에 착수하여 이듬해 6월(月)부터 본(本) FM주조를 적용하여왔다. 그러나 1) 폴리스티렌 모형의 주입시(時) 부(不)기화 잔유물에 의한 주물표면결함 2) 도형제 박리 현상에 의한 표면결함 3) 주입시(時) 다량의 매연발생 및 4) 조형시(時) 모형의 변형에 의한 칫수결함 등의 문제가 대두되어 품질면에서는 1982년6월(月)에 와서야 어느정도 정상궤도에 도달하여 본격적인 FM 생산을 해오고 있는 중이다. 여기서 그동안 당사가 경험한 대형주물 (자동차금형:$1{\sim}10$톤/개)에 있어서의 FM 주조법의 적용사례를 본지(本誌)를 통하여 간단히 소개하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.436-436
• /
• 2014

본 연구에서는 전 세계적으로 활발히 연구되고 있는 나노바이오센서 분야 중 가장 주목을 받고 있는 LSPR 원리를 이용한 바이오센서를 제작하였다. 금속 나노입자의 국소 표면 플라즈몬 공명현상에 의한 주위환경에 민감하게 반응하는 특성은 고감도 광학형 바이오센서, 화학물질 검출 센서등에 응용된다. 특히 금 나노막대와 같은 1차 나노구조물은 나노막대의 주변 환경 변화에 따라 뚜렷한 플라즈몬 흡수 밴드 변화를 나타냄으로 센서로 적용 했을 때 고감도의 측정이 가능하다. 본 연구에서는 다공성인 알루미늄 양극산화 박막 주형틀을 이용하여 다양한 종횡비를 가지는 금 나노막대를 합성하고, 나노막대 어레이 형태의 박막을 제작하였다. 금 나노막대의 합성은 알루미늄 양극산화막을 사용한 주형제조 방법(template method)을 사용하는 전기화학 증착법을 사용하였다. 우선 부도체인 알루미늄 양극 산화막의 한쪽면을 열증착 장비를 사용하여 금을 증착하여 작업 전극(working electrode)을 형성하였다. 백금 선(platinum wire)을 보조 전극(counter electrode)으로 사용하고 Ag/AgCl 전극을 기준 전극(reference electrode)으로 사용하여 삼전극계(three-electrode system)를 형성하였으며, 금 도금 용액(orotemp 24 gold plating solution, TECHNIC INC.)을 사용하여, 800 mV 전압에서 금 나노 막대를 합성하였다. 금 나노막대의 길이는 테플론 챔버를 통과한 전하량 또는 전기 증착 시간에 비례하여 결정된다. 금 나노막대를 성장시킨 알루미늄 양극산화막을 실리콘 웨이퍼에 은 페이스트를 사용하여 고정시킨 후 수산화나트륨 (NaOH)용액을 사용하여 알루미늄 양극산화막을 녹여내어 수직방향으로 정렬되어 있는 나노 막대 어레이 박막을 제조 하였다. 또한 제작된 금 나노막대 어레이의 광학적 특성을 평가하였다. 본 연구에서와 같이 나노막대를 직경방향으로 측정할 경우, 직경방향의 transverse mode만 측정된다. 금 나노 막대가 알루미늄 양극산화막 안에 포함된 상태로 측정된 금 나노로드 어레이 박막의 광 스펙트럼 분포는 금 나노막대의 가시광영역에서의 흡수 스펙트럼을 측정하였을시 직경 및 길이에 따라 transverse mode의 ${\lambda}$ max (최대 흡광)의 위치가 변화됨을 나타낸다. 실험 결과를 바탕으로 나노막대의 종횡비가 증가함에 따라 흡수 스펙트럼의 transverse mode ${\lambda}$ max가 미약하게 단파장 영역으로 이동하는 것을 확인할 수 있다. 이러한 결과는 원기둥 형태의 금 나노막대의 흡수 스펙트럼에 대한 이론적인 예측과 부합한다. 바이오센서로의 적용 가능성을 확인하기 위하여 자기조립단분자막을 형성하여 항체를 고정하고 CRP에 대한 응답특성을 평가하였다. CRP 항원-항체의 면역반응에 대한 실험 결과 CRP 항원의 농도가 증가함에 따라 넓은 측정범위에서 선형적으로 흡광도가 증가하는 결과를 나타내었으며, CRP 10 fg/ml의 농도까지 검출할 수 있었다. 센서의 선택성을 확인하기 위하여 감지하고자하는 대상물질이 아닌 Tn T 항원을 감지막에 반응시켜 흡광도 변화를 분석하였다. 결과적으로 제작된 센서칩은 선택성을 가지고 측정하고자하는 물질에만 반응함을 확인하였다. 이러한 결과는 다양한 직경을 사용한 부가적인 LSPR현상의 연구에 활용될 수 있을 것이다.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.30-37
• /
• 2011

This ultra real-time PCR (UPCR) based diagnosis system for avian influenza A virus (AIV) subtype was designed. The target primer in this study was derived from H5N1 subtype-specific 133 bp partial gene of hemagglutinin (HA), and was synthesized by using PCR-based gene synthesis on the ground of safety. UPCR was operated by Mini-Opticon Q-PCR Quantitative Thermal Cycler using aptamer-based molecular beacon, total 10 ${\mu}l$ of reaction mixture with extraordinarily short time in each steps in PCR. The detection including UPCR and analysis of melting temperature was totally operated within 15 min. The AIV-specific 133 bp PCR product was correctly amplified until 5 molecules of HA gene as minimum of templates. This kind of PCR was drafted as UPCR in this study and it could be used to detect not only AIV subtype, but also other pathogens using UPCR-based diagnosis.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.160-168
• /
• 1994

Pentadentate Schiff base molybdenum(Ⅴ) complexes such as [Mo(Ⅴ)O(Sal-DET)(NCS)] and [Mo(Ⅴ)O(Sal-DPT)(NCS)] were synthesized by Sabat method. The structure of these complexes were identified by elemental analysis, spectroscopy, and thermogravimetric analysis(T.G.A.). It was found that the mole ratio of Schiff base ligand to the complexes was found to be 1 : 1. The redox processes of the complexes were investigated by cyclic voltammetric and differential pulse polarographic technique in nonaqueous solvent containing 0. 1 M tetraethyl ammonium perchlorate(TEAP) as supporting electrolyte at glassy carbon electrode. It was found that diffusion controlled reduction processes of four steps with one electron were 2Mo(Ⅴ)$\rightleftarrow^{e-}$ Mo(Ⅴ)Mo(Ⅳ) $\longrightarrow^{e-}$ 2Mo(Ⅳ), Mo(Ⅳ) $\longrightarrow^{e-}$ Mo(Ⅲ) $\longrightarrow^{e-}$ Mo(Ⅱ)

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.777-782
• /
• 2008

Using ultrasonic-induced polymerization of pyrrole, mesoporous $TiO_2$ thin film with polypyrrole nanoparticles was prepared. Polypyrrole nanoparticles were ultrasonically synthesized in the mother solution of mesoporous $TiO_2$ before spin-coating. The polypyrrole particles were well dispersed in the solution. After spin-coating and calcinations process, the nanocomposite films have well-organized pore channels without pore-collapse, and polypyrrole nanoparticles are well dispersed in mesoporous $TiO_2$ matrix. The pore size and light absorbance of the mesoporous nanocomposite thin films were controlled by using different template materials, and by using different amount of pyrrole monomer, respectively.

• Journal of Life Science
• /
• v.24 no.4
• /
• pp.428-436
• /
• 2014

Loop-mediated isothermal amplification (LAMP) technique relies on autocycling strand displacement DNA sysnthesis without template denaturation steps under isothermal conditions. LAMP has more advantages than modern PCR, as it requires only basic laboratory equipment like an isothermal water bath, oven, and heating cabinet. Hence, in this study, five random primers were designed with Streptococcus parauberis, shikimate kinase Arok gene sequences (Genbank accession number: CP0024711). Two primers were selected based on the ladder pattern. Other optimum reaction conditions like temperature, time, and sensitivity were established and confirmed with conventional SYBR-green PCR. Results confirmed that the designed random primers were species specific, without any non-target DNA amplification under isothermal conditions. Hence, this study suggests that LAMP techniques could be used in the diagnosis of fish pathogen, specifically S. parauberis.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.529-535
• /
• 1996

Methyl frucloside was purified from the aqueous sugar/methyl fructoside solution by liquid chromatography using Amberlite IRA-900, strong anion-exchange resin. The optimum operating conditions, resolution and productivity of methyl fructoside were discussed to evaluate the practical feasibility of the proposed chromatographic separation process of methyl fructoside which is useful as a new starting material for sugar ester synthesis. The linear chromatography model with HETP was well applied to the chromatographic separation process of methyl fructoside and the theoretical solution successfully predicted the elution chromatogram of methyl fructoside and sucrose at different superficial linear velocity of eluent for rectangular feed with different loading volume of packed bed. The optimum operating conditions were found to be 75% with the loading volume of packed bed at 1.13 cm/min of the superficial linear velocity at $60^{\circ}C$, and gave the productivity of methyl fructoside of 7 mg/g-resin/h with the resolution of 1.1.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.136-145
• /
• 1994

Polymeric complexes such as M(Ⅱ)(PVPS)(SND), M(Ⅱ)(PVPS)(SOPD) have been prepared with monomeric complexes, M(Ⅱ)(SND) and M(Ⅱ)(SOPD)[M: Co(Ⅱ), Ni(Ⅱ), and Cu(Ⅱ)] and polymer PVPS. These complexes have been indentified by elemental analysis, spectroscopy, and T.G.A. From the results, it was found that M(Ⅱ)(PVPS)(SND), M(Ⅱ)(PVPS)(SOPD) complexes were penta-coordinated configuration. Electrochemical properties of these complexes studied by cyclic voltammetry and differential pulse polarography in 0.1 M TEAP-DMF solution at glassy carbon electrode. Co(Ⅱ)(PVPS)(SND) and Co(Ⅱ)(PVPS)(SOPD) showed irreversible two step reduction, such as Co(Ⅲ)/Co(Ⅱ) and Co(Ⅱ)/Co(Ⅰ), and Ni(Ⅱ)(PVPS)(SND), Ni(Ⅱ)(PVPS)(SOPD), Cu(Ⅱ)(PVPS)(SND), and Cu(Ⅱ)(PVPS)(SOPD) complexes showed irreversible one step reduction, such as Ni(Ⅱ)/Ni(Ⅰ) and Cu(Ⅱ)/Cu(Ⅰ), respectively.