• Journal of the Korean Electrochemical Society
• /
• v.17 no.2
• /
• pp.86-93
• /
• 2014

Mesoporous tin oxide (meso-$SnO_2$) with 5 nm mesopore and well-aligned $SnO_2$ nanowire-bundles with 5~7 nm diameters were prepared by template synthesis method. In addition to meso-$SnO_2$, meso-$SnO_2$/$SiO_2$, which has almost the same structure as meso-$SnO_2$ including $SiO_2$ used as the template were prepared by the modification of template synthesis. X-ray diffraction, N2 adsorption-desorption isotherms, transmission electron microscopy observed structures of meso-$SnO_2$ and meso-$SnO_2$/$SiO_2$. Although the meso-$SnO_2$/$SiO_2$ showed some positive evidences to suppress the volume change of meso-$SnO_2$ through cyclic voltammogram, electrochemical impedance spectroscopy, and voltage profiles during cycling, its cycle life was not improved highly to address modified structural effects. Thus, further study might be done to control the nanostructure of meso-$SnO_2$/$SiO_2$ for enhanced cycle performance.

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.261-268
• /
• 2018

To prepare mesoporous $TiO_2$ ($meso-TiO_2$) with anatase and rutile crystal structures, hydrothermal and template synthesis were used. $Meso-TiO_2$ with anatase structure was obtained by hydrothermal synthesis. The crystal structure of $meso-TiO_2$ by hydrothermal synthesis converted from anatase to rutile by simple heating at $600^{\circ}C$ and above. However, their mesopore structure collapsed due to phase transition. To prepare $meso-TiO_2$ with rutile structure, template synthesis method was applied using mesoporous silica KIT-6 as a template. Once we incorporated anatase $TiO_2$ inside mesopores of silica, the phase transition temperature of $TiO_2$ confined inside KIT-6 was much higher ($900^{\circ}C$) than that of free-standing $TiO_2$ ($600^{\circ}C$). The suppression of $TiO_2$ phase transition inside mesopores of KIT-6 is closely related with the interaction between $TiO_2$ surface and silica walls in KIT-6 because oxygen vacancy in $TiO_2$ is regarded as the starting point for phase transition. After removal of silica template by NaOH solution washing, $meso-TiO_2$ with mixed phase between anatase and rutile was obtained.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2011

Tetraethoxysilane(TEOS) as a silica precursor and hydrochloric acid as an acid catalyst have been used in a surfactant-template synthesis of micrometer-sized mesoporous silica microspheres based on the macroemulsion technique. Increase in the concentration of tetraethoxysilane of the reaction mixture has a serious destructive effect on the particle shape and pore structure. As the acid concentration increases, relatively small microspheres are formed without destroying their spherical morphology of the particles as well as the pore structures. However, due to the attractive interaction between particles in an acidic condition, strong silica agglomerates are formed, and therefore are subject to a post-ultrasonic treatment to separate into an individual single particle.

• Membrane Journal
• /
• v.22 no.1
• /
• pp.35-45
• /
• 2012

We prepared the highly ordered nano-wires of polypyrrole, polyaniline conductive polymers and polypyrrole/ polyaniline conductive copolymers by templating the anodic aluminum oxide (AAO) porous membrane, in which pore diameter was 20 nm, 100 nm and 200 nm. Those conductive polymers were grown from pore inner surface of AAO membrane forming hollow tubes and then wire structures were formed after 3 hour polymerization. By removing AAO membrane templates using sodium hydroxide solution, the conductive polymer nano-wires were successfully obtained, of which diameter and length were close to the ones of nano-pores in AAO membrane template. Crystallinity and thermal stability of the conductive polymer nano-wires were higher than irregular ones that prepared by solution polymerization. Furthermore, the electrical resistance of conductive polymer nano-wires were reduced by about 4~60% compared with that of the irregular polymers prepared by solution polymerization.

• 기계와재료
• /
• v.22 no.4
• /
• pp.36-48
• /
• 2010

고분자의 자기조립화 구조를 주형 (template)으로 이용하여 합성되는 메조다공성 물질은 고분자 주형 제거 후 나노크기의 규칙 기공구조가 이루어내는 거대한 비표면적을 제공한다. 이 거대 비표면적을 이루는 나노기공은 광학, 에너지, 환경 및 생체 등 여러 가지 소재분야에서 높은 활용가능성을 가진다. 종래의 연구는 메조다공성 물질의 다양한 응용가능성을 제안하기 위한 재료합성 및 설계에 초점이 맞추어져 있었으나 최근에는 기능부여를 통한 실질적 활용법 제안으로 그 패러다임이 전환되고 있다. 특히, 메조다공성 물질의 에너지 저장 및 발현소재로서의 가능성과 생체활성물질 전달 및 생체골 형성능이 확인되면서 에너지와 바이오 분야에서 특히 높은 관심이 주목되고 있다. 본고에서는 이 중 생체소재로서의 메조다공성 물질 설계 및 응용과 관련된 연구 현황을 정리하였다.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.316-319
• /
• 2003

스멕타이트계 점토광물은 팽윤성, 양이온 교환, 층간삽입 (intercalation), 콜로이드 형성, 겔형성, 층간화합물 형성 등의 기능이 있으므로 옛날부터 다양한 산업분야에서 폭넓게 사용되었다. 대표적인 용도는 굴착용 니수, 주형점결제, 농약 증량제, 토목용, 유기 스멕타이트 등이 있다. 그러나, 천연에서 산출되는 스멕타이트는 산지별로 성능이나 특성이 다르고, 불순물 함유등에 의해 안정적인 품질을 얻을 수가 없어, 최종제품의 고품질화, 고기능화에서의 대응이 곤란한 경우가 많고, 또한 양질의 천연 스멕타이트의 매장양은 한정되어 있다. (중략)

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.233-245
• /
• 2007

Previous finite element studies have shown that AASHTO Standard load distribution factor (LDF) equations appear to be conservative for longer spans and larger girder spacing, but too permissible for short spans and girder spacing. AASHTO LRFD specification defines the distribution factor equation for girder spacing, span length, slab thickness, and longitudinal stiffness. However, this equation requires an iterative procedure to correctly determine the LDF value due to an initially unknown longitudinal stiffness parameter. This study presents a simplified LDF equation for interior and exterior girders of two-span continuous I-girder bridges that does not require an iterative design procedure. The finite element method was used to investigate the effect of girder spacing, span length, slab thickness, slab width, and spacing and size of bracing. The computer program, GTSTRUDL, was used to idealize the bridge superstructures as the eccentric beam model, the concrete slab by quadrilateral shell elements, steel girders by space frame members, and the composite action between these elements by rigid links. The distribution factors obtained from these analyses were compared with those from the AASHTO Standard and LRFD methods. It was observed through the parametric studies that girder spacing, span length, and slab thickness were the dominant parameters compared with others. The LRFD distribution factor for the interior girder was found to be conservative in most cases, whereas the factor for the exterior girder to be unconservative in longer spans. Furthermore, a regression analysis was performed to develop simplified LDF formulas. The formulas developed in this study produced LDF values that are always conservative to those from the finite element method and are generally smaller than the LDF values obtained from the AASHTO LRFD specification. The proposed simplified equation will assist bridge engineers in predicting the actual LDF in two-span continuous I-girder bridges.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.1
• /
• pp.23-36
• /
• 1999

Medimin A is a derivative of vitamin A which has been developed by coupling retinoic acid with polyethylene glycol(PEG) to enhance skin permeability and stability. We carried out the collagen synthesis and clinical test to examine the reducing effect of wrinkles by Medimin A. In vitro collagen synthesis was evaluated by quantitative assay of ($^3$H)-proline incorporation into collagenase sensitive protein in fibroblast cultures. Clinical test was evaluated by image analysis of skin replica, visual observation and self-estimated response of volunteers for 10 weeks. Medimin A stimulated about 40% in collagen synthesis. The area of main deep wrinkle on the skin replica was reduced 38.4% with topical application of O/W emulsion containing 0.2% Medimin A. The wrinkles on the eye region was also reduced 25.4%-44.1% by the visual observation and 93% of all volunteers responded that topical application of the O/W emulsion was showed some reducing effect of wrinkles after 10 weeks. From these results, we suggest that Medimin A is a potent anti-wrinkle agent by objective evaluation methods(in vitro collagen synthesis and image analysis of skin replica) and subjective evaluation methods(visual observation and self-estimated response of volunteers).

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.321-328
• /
• 2004

Nano silica ball and nano carbon ball are developed commercially by template synthesis method. Adsorption of unpleasant smelling substances such as ammonia, trimethylamine, acetaldehyde and methyl mercaptane onto nano carbon ball with hollow macroporous core/mesoporous shell structures, nano carbon ball, was investigated and compared with that onto odor adsorbent materials, activated carbon, commercially available. The adsorption and decomposition of malodor at nano carbon ball exhibited superior than those onto activated carbon. The physicochemical properties such as mesopore size distributions, large nitrogen BET specific surface area and large pore volume and decomposition of malodor were studied to interpret the predominant adsorption performance. The nano carbon ball is expected to be useful in many applications such as deodorizers, adsorbent of pollutants.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.4 no.4
• /
• pp.1-8
• /
• 2013

Pile foundations constructed by the fiber reinforced polymer plastic piles have been used in coastal and oceanic regions in many countries. Generally, fiber reinforced polymer plastic piles are consisted of filament winding FRP which is used to wrap the outside of concrete pile to increase the axial load carrying capacity or pultruded FRP which is located in the core concrete to resist the bending moment arising due to eccentric loading. In this paper, the analytical procedures of hybrid concrete filled FRP tube flexural members are suggested based on the CFT design method. Moreover, the analytical results are compared with the experimental results to obtained by the previous researches. The results of comparison analyses are performed to estimate the accuracy of the analytical procedure for hybrid FRP-concrete composite compression test, members under eccentrical loading.