• Journal of the Geological Society of Korea
• /
• v.54 no.6
• /
• pp.615-630
• /
• 2018

Basin analysis is a research field to understand the formation and evolution of sedimentary basins. This task requires various geoscientific datasets as well as numerical and graphical modelling techniques to synthesize results dimensionally in time and space. For basin analysis and modelling in a comprehensive workflow, BasinVis 1.0 was released as a MATLAB-based program in 2016, and recently the software has been extended to BasinVis 2.0, with new functions and revised user-interface. As a case study, this work analyses the southern Vienna Basin and visualizes the sedimentation setting and subsidence evolution to introduce the basin modelling functions of BasinVis 2.0. This is a preliminary study for a basin-scale modelling of the Vienna Basin, together with our previous studies using BasinVis 1.0. In the study area, during the late Early Miocene, sedimentation and subsidence are significant along strike-slip and en-echelon listric normal faults. From the Middle Miocene onwards, however, subsidence decreases abruptly over the area and this situation continues until the Late Miocene. This is related to the development of the pull-apart system and corresponds to the episodic tectonic subsidence in strike-slip basins. The subsidence of the Middle Miocene is confined mainly to areas along the strike-slip faults, while, from the late Middle Miocene, the depocenter shifts to a depression along the N-S trending listric normal faults. This corresponds to the regional paleostress regime transitioning from NE-SW trending transtension to E-W trending extension. This study applies various functions and techniques to this case study, and the modelled results demonstrate that BasinVis 2.0 is effective and applicable to the basin modelling.

• The Korean Journal of Petroleum Geology
• /
• v.2 no.2 s.3
• /
• pp.59-70
• /
• 1994

The Cenozoic geological structures and the tectonic evolution of the southern Ulleung Basin were studied with seismic profiles and exploration well data. Basement structure of the Korea Strait is distinctly characterized by normal faults trending northeast to southwest. The normal faults of the basement are most likely related to the initial liking and extensional tectonics of Ulleung Basin. Tsushima fault along the west coast of Tsushima islands runs northeastward to the central Ulleung Basin. The Middle Miocene and older sequences in the Tsushima Strait show folds and faults mostly trending northeast to southwest. These folds and faults may be interpreted as a result of compressional tectonics. The Late Miocene to Qauternary sequences are not much deformed, but numerous faults mostly N-S trending are dominated in the Tsushima Strait. The Ulleung Basin was in intial rifting during Oligocene, and then active extension and subsidence from Early to early Middle Miocene. Therefore SW Japan separated from Korea Peninsula and drifted toward southeast, and Ulleung Basin was formed as a pull-apart basin under dextral transtensional tectonic regime. During rifting and extensional stage, Tsushima fault as a main tectonic line separating SW Japan block from the Korean Peninsula acted as a normal faulting with right-lateral strike-slip motion as SW Japan drifted southeastward. During middle Middle Miocene to early Late Miocene, the opening of Ulleung basin stopped and uplifted due to compressional tectonics. The southwest Japan block converging on the Korean Peninsula caused compressional stress to the southern margin of Ulleung Basin, resulting in strong deformation under sinistral transpressional tectonic regime. Tsushima fault acted as thrust fault with left-lateral strike-slip motion. From middle Late Miocene to Quaternary, the southern margin of Ulleung Basin has been controlled by compressional motion. Thus the Tsushima fault still appears to be an active thrust fault by compressional tectonic regime.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.1 no.3 s.3
• /
• pp.123-136
• /
• 2001

The purpose of application of moment tensor inversion method is to determine source parameters, such as, focal mechanism, seismic moment and source depth. This paper presents results of focal mechanism solutions of 14 recent events with magnitudes ranging from M3.3 to M4.8 by using moment tensor inversion method called TDMT_INV. The strike of faults is in the direction of NE-SW and NW-SE with the movement of strike-slip or strike-slip of minor reverse component. The compressional axis of the stress field is predominantly E-W or ENE-WSW except for some faults, which are distributed at Ryongnam Massif and Wonsan, they have a compressional axis of N-S or NNW-SSE.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.235-240
• /
• 1999

From the seismic network data of the Korea Institute of Geology, Mining & Materials during 1995-1996, we derived a composite fault-plane solution of the microearthquakes occurred in the Yangsan fault area. The composite fault-plane solution of nine events shows the orientation of fault 15 ± 3°in strike, 60 ± 8°in dip and 140°in rake or 128 ± 3°in strike, 56 ± 8°in dip and 37°in rake. The compressional axis of the stress field trends ENE to WSW, and this field suggests strike-slip motion with thrust component. The result is consistent with the 1996 Yeong-weol event and the stress field in and around the Korean Peninsula, previously reported.

• Economic and Environmental Geology
• /
• v.54 no.3
• /
• pp.389-397
• /
• 2021

Moryang Fault is geomorphologically observed as a linear fault valley from Angang through Moryang, Duckhyun and Wondong to Gimhae, and contacts with Yangsan Fault, being obliquely away to the east, at Angang disrict. The fault valley appears a V-shape feature with a width from 100 to 300 m, and has fragmental zones of the fault along the valley on a small scale. Nine fault-outcrop localities were found along the nine-kilometers valley between Daehyun-ri, Gyeongju, and Baenaemi-gogae, Yangdong-ri, Ulsan. The fault strikes the North-North-East to the Northeast and dips to the Northwest with high angles, and reveals it had been undergone predominantly sinistral reverse fault movement sense, left-lateral and right-lateral strike-slip sense in bedrocks. However, after unconsolidated sediments, there was the top-up-to-the-east dextral reverse fault movement.

• Economic and Environmental Geology
• /
• v.40 no.2 s.183
• /
• pp.171-189
• /
• 2007

A study of anisotropy of magnetic susceptibility (AMS) was undertaken on Cretaceous granitic, volcanic and sedimentary rocks in the eastern region of the Yangsan fault, southeast Korea. A total of 542 independently oriented core samples collected form 77 sites were studied. The main magnetic mineral in granitic rocks is magnetite according to the magnitude of bulk susceptibility, high-temperature susceptibility variation and isothermal remanent magnetization. Both of magnetic lineation and foliation with NE-SW trends are revealed in the granitic rocks, while volcanic rocks show scattered directions and sedimentary rocks show only load foliation parallel to the bedding planes. The following evidences read to the conclusion that both magnetic fabrics in the granitic rocks have been obtained by a tectonic stress before full solidification of the magma: (i) A fully hardened granitic rocks would get hardly any fabric, (ii) Difference of the magnetic fabric trends with those of the geological structures in the granitic rocks themselves formed by brittle deformation after solidification (e.g. patterns of small-faults and joints), (iii) Kinking of biotite and undulose extinction in quartz observed under the polarizing microscope, (iv) Discordance of magnetic fabrics in the granitic rocks with those in the surrounding rocks. The NE-SW trend of the magnetic foliations suggests a NW-SE compressive stress of nearly contemporaneous with the emplacement of the granitic rocks. The compression should have caused a sinistral strike-slip movement of the Yangsan Fault considering the trend of the latter. As the age of the granitic rocks in the study area is reported to be around $60\sim70$ Ma, it is concluded that the Yangsan fault did the sinistral strike-slip movement during this time (L. Cretaceous Maastrichtian - Cenozoic Paleocene).

• The Journal of the Petrological Society of Korea
• /
• v.28 no.4
• /
• pp.347-357
• /
• 2019

The main fault zone of the Yangsan Fault, located in the southeastern part of the Korean peninsula, is newly found at the Cheonjin-ri, Dudong-myeon, Ulju-gun, Ulsan, Korea. About 100 wide fault zone exposed along the Guryangcheon stream strikes N-S and dips over 70° toward east. The main fault zone is composed of N-S-striking gouge and breccia layers and enclosed lenses. Striations on the subvertical fault surfaces mainly indicate dextral slip, but moderate-angle minor reverse faults showing top-tothe-west shearing transect the foliated high-angle gouge and breccia layers. These indicate that the dextral slip along the fault, which is interpreted as the main movement of the fault, was followed by reverse slip. The fault zone is composed of N-S-striking gouge layers and enclosed, fractured lenses. Locally distributed NE-SW- to E-W-striking fault gouge layers with fractured lenses show asymmetric folds, indicating progressive dextral movement. Therefore, the exposed fault zone has a high internal complexity due to the combined effects of NNE-SSW-trending dextral shearing and E-W-trending shortening by compression. In addition, around main boundary fault between the western volcanic rocks and eastern sedimentary rocks offsets the overlying Quaternary fluvial conglomerate. This is a good example that understanding of internal structures of main fault zone (or fault core), such as the Yangsan Fault, plays an important role to study the Quaternary activity and to find the active fault.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.84-85
• /
• 2003

소백산육괴의 동부에 분포하는 영양-울진지역의 선캠브리아기 변성암류는 평해층, 기성층, 원남층, 평해화강편마암, 하다우백질화강편마암 등으로 구성되어 있다(김옥준 외, 1963). 그러나, 최근 김남훈 외(2001, 2002)은 야외조사연구와 암석학적 및 지구화학적 연구를 통하여 주로 변성화산암류로 기재되었던 기성층은 변성화산암류가 아니라 평해층과 원남층에서 산출되는 화강암질편마암과 각섬암 기원의 변성암류가 연성전단변형을 받아 형성된 압쇄암 내지 초압쇄암으로 되어 있고, 기존의 기성층은 변성화산암류와 같이 성분상으로 구분되는 별개의 층이 아닌 구조적으로 만들어진 연성전단대의 중심부일 가능성을 시사한 바가 있다. 본 연구는 연성전단대의 연장성 및 연성전단대 형성과 관련된 지구조운동의 특성을 파악하고, 중첩된 변형구조들의 선후관계로부터 영양-울진지역 선캠브리아기 변성암류에 대한 변형작용사를 규명하기 위해 기성층의 분포지를 중심으로 이 지역 선캠브리아기 변성암류에 대한 상세한 야외지질조사를 실시하였다. 그 결과, 예천(북후면-평은면)지역을 통과하여 봉화 부근에서 동북동-서남서 방향이 동-서 방향으로 전환하여 장군봉지역까지 연장되는 것으로 알려져 있는 우수 주향 이동성 예천전단대(KIGAM, 1995; 강지훈 외 1997; 강지훈, 2000; 강지훈과 김형식, 2000)는 영양-울진지역까지 연장됨이 확인된다. 또한, 영양-울진지역의 선캠브리아기 변성암류에는 연성전단변형 이전에 적어도 한 번의 습곡작용과 이후에 적어도 두 번의 습곡작용이 인지된다. 각 변형단계별 특징적인 구조요소를 요약하면 다음과 같다. D1 변형: 편마면 내지 편리(S0)가 습곡되어 형성된 F1 습곡은 동-서 방향의 준 수평적인 습곡축을 갖는 뿌리 없는 등사습곡 형태로 인지된다. 양 날개부의 S0 엽리는 F1 습곡축면(S1)으로 완전히 전위된 하나의 엽리(S0-1)로 나타나고, S0-1 엽리는 이 지역의 광역엽리로 인지된다. S0-1 광역엽리는 구성암류의 대상 분포 방향과 유사한 서북서 주향에 북쪽으로 중각 경사하는 집중된 방향성을 보이며 분산되어 나타난다. D2 변형: 변형구조로는 신장선구조, 압쇄구조면, 비대칭습곡 등으로 인지된다. 신장선구조는 S0-1 엽리면상에서 주로 신장된 석영(집합체)과 장석(집합체)들의 정향배열에 의해 정의되고, S0-1 엽리의 주향 방향으로 저각으로 침강하는 집중된 방향성을 보이며 분산되어 나타난다. 신장선구조에 평행하고 S0-1 엽리에 수직한 단면에서는 상부-동쪽-이동의 우수주향 이동성 연성 전단운동감각을 지시하는 구조요소들이 다량 관찰된다. 연성전단변형에 의해 형성된 압쇄구조면은 전단엽리와 압쇄엽리에 각각 해당하는 C면과 S면 등이 인지된다. 전단엽리 C면은 S0-1 광역엽리와 거의 일치하고, 압쇄엽리 S면은 F2 비대칭습곡의 축면엽리와 거의 일치한다. S0-1 엽리를 습곡시키는 F2 비대칭습곡은 S0-1 엽리를 전단면으로 하여 상부-동쪽-이동 전단운동에 의해 형성된 밀착습곡 형태로 인지된다. F2 습곡축은 북동 방향으로 중각 내지 저각 침강하고 F1 습곡축과는 65$^{\circ}$-75$^{\circ}$ 범위의 사이각을 이룬다. F2 습곡축면은 동북동 주향에 북쪽으로 중각으로 경사하고 F1 습곡축면과는 20$^{\circ}$-40$^{\circ}$ 범위의 사이각을 이룬다. D3 변형. S0-1 엽리와 압쇄구조면 등을 습곡시키는 F3 습곡은 준 수평적인 습곡축과 습곡축면을 갖는 개방 횡와습곡의 형태로 인지된다. D4 변형: F4 습곡은 비대칭 공역성 킹크습곡, 공역성 충상단층에 수반되어 나타나는 드래그습곡, 대칭 개방 직림습곡 등의 다양한 습곡 형태로 인지된다. 이들 F4 습곡의 축면엽리는 일반적으로 동-서 주향에 남쪽과 북쪽으로 경사한다. 그 경사각은 비대칭 공역성 킹크습곡(저각), 드래그습곡(중각), 대칭 개방 직립습곡(고각) 순으로 고각을 이룬다. F4 습곡축은 동쪽과 서쪽으로 저각 침강하는 집중된 방향성을 보인다. 공역성 충상단층은 동-서 주향에 남쪽과 북쪽으로 경사하는 단층면과 상부가 북쪽과 남쪽으로 충상하는 운동상을 보인다. 드래그습곡의 축면엽리는 이러한 공역성 충상단층운동의 전단압축방향에 수직으로 발달한다. 이러한 D4 변형구조는 남-북 방향의 압축 지구조 환경하에서 형성된 것으로 고찰된다.

• Economic and Environmental Geology
• /
• v.16 no.4
• /
• pp.269-276
• /
• 1983

This paper describes three-dimensional (3-D) standard curves for single prismatic buried bodies in induced polarization (IP) method. Dipole-dipole IP responses for the bodies are calculated by the numerical modeling technique using an integral equation solution. The pattern of IP responses for conductive targets depends on the ratio of the width of body to the depth extent. The IP response of a body of six units in strike length approximates that of a two-dimensional body. In addition, if the strike length is long enough, a layered-earth interpretation is applicable for a body much longer than four units in width. Moving an IP line away from the center of a body alon gstrike produces an effect similar to that of increasing the depth. Moving the location of body along line has little effect to the pattern of IP responses.

• Journal of the Korean Geophysical Society
• /
• v.3 no.4
• /
• pp.245-250
• /
• 2000

By using amplitude ratios (SV/P, SH/P, SV/SH) and P and S wave polarities, we obtained fault plane solutions of the June 26, 1997 Kyong-ju earthquake. The solutions show $150{\pm}4^{\circ}$ in strike, $63{\pm}6^{\circ}$ in dip and $65{\pm}7^{\circ}$ in rake, or $18{\pm}12^{\circ}$ in strike, $26{\pm}3^{\circ}$ in dip and $120{\pm}5^{\circ}$ in rake. This result implies the stress field trending ENE-WSW, which is remarkably consistent with the previous results obtained from the moment tensor inversion, and from the composite fault plane solution for the events occurred around the Yangsan fault area.